/** ****************************************************************************** * @file stm32f1xx_hal_can.c * @author MCD Application Team * @version V1.0.0 * @date 15-December-2014 * @brief CAN HAL module driver. * This file provides firmware functions to manage the following * functionalities of the Controller Area Network (CAN) peripheral: * + Initialization and de-initialization functions * + IO operation functions * + Peripheral Control functions * + Peripheral State and Error functions * @verbatim ============================================================================== ##### How to use this driver ##### ============================================================================== [..] (#) Enable the CAN controller interface clock using __HAL_RCC_CAN1_CLK_ENABLE() for CAN1 and __HAL_RCC_CAN2_CLK_ENABLE() for CAN2 -@- In case you are using CAN2 only, you have to enable the CAN1 clock. (#) CAN pins configuration (++) Enable the clock for the CAN GPIOs using the following function: __HAL_RCC_GPIOx_CLK_ENABLE(); (++) Connect and configure the involved CAN pins using the following function HAL_GPIO_Init(); (#) Initialise and configure the CAN using HAL_CAN_Init() function. (#) Transmit the desired CAN frame using HAL_CAN_Transmit() function. (#) Receive a CAN frame using HAL_CAN_Receive() function. *** Polling mode IO operation *** ================================= [..] (+) Start the CAN peripheral transmission and wait the end of this operation using HAL_CAN_Transmit(), at this stage user can specify the value of timeout according to his end application (+) Start the CAN peripheral reception and wait the end of this operation using HAL_CAN_Receive(), at this stage user can specify the value of timeout according to his end application *** Interrupt mode IO operation *** =================================== [..] (+) Start the CAN peripheral transmission using HAL_CAN_Transmit_IT() (+) Start the CAN peripheral reception using HAL_CAN_Receive_IT() (+) Use HAL_CAN_IRQHandler() called under the used CAN Interrupt subroutine (+) At CAN end of transmission HAL_CAN_TxCpltCallback() function is executed and user can add his own code by customization of function pointer HAL_CAN_TxCpltCallback (+) In case of CAN Error, HAL_CAN_ErrorCallback() function is executed and user can add his own code by customization of function pointer HAL_CAN_ErrorCallback *** CAN HAL driver macros list *** ============================================= [..] Below the list of most used macros in CAN HAL driver. (+) __HAL_CAN_ENABLE_IT: Enable the specified CAN interrupts (+) __HAL_CAN_DISABLE_IT: Disable the specified CAN interrupts (+) __HAL_CAN_GET_IT_SOURCE: Check if the specified CAN interrupt source is enabled or disabled (+) __HAL_CAN_CLEAR_FLAG: Clear the CAN's pending flags (+) __HAL_CAN_GET_FLAG: Get the selected CAN's flag status [..] (@) You can refer to the CAN HAL driver header file for more useful macros @endverbatim ****************************************************************************** * @attention * *

© COPYRIGHT(c) 2014 STMicroelectronics

* * Redistribution and use in source and binary forms, with or without modification, * are permitted provided that the following conditions are met: * 1. Redistributions of source code must retain the above copyright notice, * this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright notice, * this list of conditions and the following disclaimer in the documentation * and/or other materials provided with the distribution. * 3. Neither the name of STMicroelectronics nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * ****************************************************************************** */ /* Includes ------------------------------------------------------------------*/ #include "stm32f1xx_hal.h" #ifdef HAL_CAN_MODULE_ENABLED #if defined(STM32F103x6) || defined(STM32F103xB) || defined(STM32F103xE) || \ defined(STM32F103xG) || defined(STM32F105xC) || defined(STM32F107xC) /** @addtogroup STM32F1xx_HAL_Driver * @{ */ /** @defgroup CAN CAN * @brief CAN driver modules * @{ */ /* Private typedef -----------------------------------------------------------*/ /* Private define ------------------------------------------------------------*/ /** @defgroup CAN_Private_Constants CAN Private Constants * @{ */ #define CAN_TIMEOUT_VALUE 10 #define CAN_TI0R_STID_BIT_POSITION ((uint32_t)21) /* Position of LSB bits STID in register CAN_TI0R */ #define CAN_TI0R_EXID_BIT_POSITION ((uint32_t) 3) /* Position of LSB bits EXID in register CAN_TI0R */ #define CAN_TDL0R_DATA0_BIT_POSITION ((uint32_t) 0) /* Position of LSB bits DATA0 in register CAN_TDL0R */ #define CAN_TDL0R_DATA1_BIT_POSITION ((uint32_t) 8) /* Position of LSB bits DATA1 in register CAN_TDL0R */ #define CAN_TDL0R_DATA2_BIT_POSITION ((uint32_t)16) /* Position of LSB bits DATA2 in register CAN_TDL0R */ #define CAN_TDL0R_DATA3_BIT_POSITION ((uint32_t)24) /* Position of LSB bits DATA3 in register CAN_TDL0R */ /** * @} */ /* Private macro -------------------------------------------------------------*/ /* Private variables ---------------------------------------------------------*/ /* Private function prototypes -----------------------------------------------*/ static HAL_StatusTypeDef CAN_Receive_IT(CAN_HandleTypeDef* hcan, uint8_t FIFONumber); static HAL_StatusTypeDef CAN_Transmit_IT(CAN_HandleTypeDef* hcan); /* Exported functions ---------------------------------------------------------*/ /** @defgroup CAN_Exported_Functions CAN Exported Functions * @{ */ /** @defgroup CAN_Exported_Functions_Group1 Initialization and de-initialization functions * @brief Initialization and Configuration functions * @verbatim ============================================================================== ##### Initialization and de-initialization functions ##### ============================================================================== [..] This section provides functions allowing to: (+) Initialize and configure the CAN. (+) De-initialize the CAN. @endverbatim * @{ */ /** * @brief Initializes the CAN peripheral according to the specified * parameters in the CAN_InitStruct. * @param hcan: pointer to a CAN_HandleTypeDef structure that contains * the configuration information for the specified CAN. * @retval HAL status */ HAL_StatusTypeDef HAL_CAN_Init(CAN_HandleTypeDef* hcan) { uint32_t status = CAN_INITSTATUS_FAILED; /* Default init status */ uint32_t tickstart = 0; uint32_t tmp_mcr = 0; /* Check CAN handle */ if(hcan == NULL) { return HAL_ERROR; } /* Check the parameters */ assert_param(IS_CAN_ALL_INSTANCE(hcan->Instance)); assert_param(IS_FUNCTIONAL_STATE(hcan->Init.TTCM)); assert_param(IS_FUNCTIONAL_STATE(hcan->Init.ABOM)); assert_param(IS_FUNCTIONAL_STATE(hcan->Init.AWUM)); assert_param(IS_FUNCTIONAL_STATE(hcan->Init.NART)); assert_param(IS_FUNCTIONAL_STATE(hcan->Init.RFLM)); assert_param(IS_FUNCTIONAL_STATE(hcan->Init.TXFP)); assert_param(IS_CAN_MODE(hcan->Init.Mode)); assert_param(IS_CAN_SJW(hcan->Init.SJW)); assert_param(IS_CAN_BS1(hcan->Init.BS1)); assert_param(IS_CAN_BS2(hcan->Init.BS2)); assert_param(IS_CAN_PRESCALER(hcan->Init.Prescaler)); if(hcan->State == HAL_CAN_STATE_RESET) { /* Allocate lock resource and initialize it */ hcan-> Lock = HAL_UNLOCKED; /* Init the low level hardware */ HAL_CAN_MspInit(hcan); } /* Initialize the CAN state*/ hcan->State = HAL_CAN_STATE_BUSY; /* Exit from sleep mode */ CLEAR_BIT(hcan->Instance->MCR, CAN_MCR_SLEEP); /* Request initialisation */ SET_BIT(hcan->Instance->MCR, CAN_MCR_INRQ); /* Get timeout */ tickstart = HAL_GetTick(); /* Wait the acknowledge */ while(HAL_IS_BIT_CLR(hcan->Instance->MSR, CAN_MSR_INAK)) { if((HAL_GetTick()-tickstart) > CAN_TIMEOUT_VALUE) { hcan->State= HAL_CAN_STATE_TIMEOUT; /* Process unlocked */ __HAL_UNLOCK(hcan); return HAL_TIMEOUT; } } /* Check acknowledge */ if ((hcan->Instance->MSR & CAN_MSR_INAK) == CAN_MSR_INAK) { /* Set the time triggered communication mode */ if (hcan->Init.TTCM == ENABLE) { SET_BIT(tmp_mcr, CAN_MCR_TTCM); } /* Set the automatic bus-off management */ if (hcan->Init.ABOM == ENABLE) { SET_BIT(tmp_mcr, CAN_MCR_ABOM); } /* Set the automatic wake-up mode */ if (hcan->Init.AWUM == ENABLE) { SET_BIT(tmp_mcr, CAN_MCR_AWUM); } /* Set the no automatic retransmission */ if (hcan->Init.NART == ENABLE) { SET_BIT(tmp_mcr, CAN_MCR_NART); } /* Set the receive FIFO locked mode */ if (hcan->Init.RFLM == ENABLE) { SET_BIT(tmp_mcr, CAN_MCR_RFLM); } /* Set the transmit FIFO priority */ if (hcan->Init.TXFP == ENABLE) { SET_BIT(tmp_mcr, CAN_MCR_TXFP); } /* Update register MCR */ MODIFY_REG(hcan->Instance->MCR, CAN_MCR_TTCM | CAN_MCR_ABOM | CAN_MCR_AWUM | CAN_MCR_NART | CAN_MCR_RFLM | CAN_MCR_TXFP, tmp_mcr); /* Set the bit timing register */ WRITE_REG(hcan->Instance->BTR, (uint32_t)(hcan->Init.Mode | hcan->Init.SJW | hcan->Init.BS1 | hcan->Init.BS2 | (hcan->Init.Prescaler - 1) )); /* Request leave initialisation */ CLEAR_BIT(hcan->Instance->MCR, CAN_MCR_INRQ); /* Get timeout */ tickstart = HAL_GetTick(); /* Wait the acknowledge */ while(HAL_IS_BIT_CLR(hcan->Instance->MSR, CAN_MSR_INAK)) { if((HAL_GetTick()-tickstart) > CAN_TIMEOUT_VALUE) { hcan->State= HAL_CAN_STATE_TIMEOUT; /* Process unlocked */ __HAL_UNLOCK(hcan); return HAL_TIMEOUT; } } /* Check acknowledged */ if (HAL_IS_BIT_SET(hcan->Instance->MSR, CAN_MSR_INAK)) { status = CAN_INITSTATUS_SUCCESS; } } if(status == CAN_INITSTATUS_SUCCESS) { /* Set CAN error code to none */ hcan->ErrorCode = HAL_CAN_ERROR_NONE; /* Initialize the CAN state */ hcan->State = HAL_CAN_STATE_READY; /* Return function status */ return HAL_OK; } else { /* Initialize the CAN state */ hcan->State = HAL_CAN_STATE_ERROR; /* Return function status */ return HAL_ERROR; } } /** * @brief Configures the CAN reception filter according to the specified * parameters in the CAN_FilterInitStruct. * @param hcan: pointer to a CAN_HandleTypeDef structure that contains * the configuration information for the specified CAN. * @param sFilterConfig: pointer to a CAN_FilterConfTypeDef structure that * contains the filter configuration information. * @retval None */ HAL_StatusTypeDef HAL_CAN_ConfigFilter(CAN_HandleTypeDef* hcan, CAN_FilterConfTypeDef* sFilterConfig) { uint32_t filternbrbitpos = 0; /* Check the parameters */ assert_param(IS_CAN_FILTER_NUMBER(sFilterConfig->FilterNumber)); assert_param(IS_CAN_FILTER_MODE(sFilterConfig->FilterMode)); assert_param(IS_CAN_FILTER_SCALE(sFilterConfig->FilterScale)); assert_param(IS_CAN_FILTER_FIFO(sFilterConfig->FilterFIFOAssignment)); assert_param(IS_FUNCTIONAL_STATE(sFilterConfig->FilterActivation)); assert_param(IS_CAN_BANKNUMBER(sFilterConfig->BankNumber)); filternbrbitpos = ((uint32_t)1) << sFilterConfig->FilterNumber; /* Initialisation mode for the filter */ /* Select the start slave bank */ MODIFY_REG(hcan->Instance->FMR , CAN_FMR_CAN2SB , CAN_FMR_FINIT | (uint32_t)(sFilterConfig->BankNumber << 8) ); /* Filter Deactivation */ CLEAR_BIT(hcan->Instance->FA1R, filternbrbitpos); /* Filter Scale */ if (sFilterConfig->FilterScale == CAN_FILTERSCALE_16BIT) { /* 16-bit scale for the filter */ CLEAR_BIT(hcan->Instance->FS1R, filternbrbitpos); /* First 16-bit identifier and First 16-bit mask */ /* Or First 16-bit identifier and Second 16-bit identifier */ hcan->Instance->sFilterRegister[sFilterConfig->FilterNumber].FR1 = ((0x0000FFFF & (uint32_t)sFilterConfig->FilterMaskIdLow) << 16) | (0x0000FFFF & (uint32_t)sFilterConfig->FilterIdLow); /* Second 16-bit identifier and Second 16-bit mask */ /* Or Third 16-bit identifier and Fourth 16-bit identifier */ hcan->Instance->sFilterRegister[sFilterConfig->FilterNumber].FR2 = ((0x0000FFFF & (uint32_t)sFilterConfig->FilterMaskIdHigh) << 16) | (0x0000FFFF & (uint32_t)sFilterConfig->FilterIdHigh); } if (sFilterConfig->FilterScale == CAN_FILTERSCALE_32BIT) { /* 32-bit scale for the filter */ SET_BIT(hcan->Instance->FS1R, filternbrbitpos); /* 32-bit identifier or First 32-bit identifier */ hcan->Instance->sFilterRegister[sFilterConfig->FilterNumber].FR1 = ((0x0000FFFF & (uint32_t)sFilterConfig->FilterIdHigh) << 16) | (0x0000FFFF & (uint32_t)sFilterConfig->FilterIdLow); /* 32-bit mask or Second 32-bit identifier */ hcan->Instance->sFilterRegister[sFilterConfig->FilterNumber].FR2 = ((0x0000FFFF & (uint32_t)sFilterConfig->FilterMaskIdHigh) << 16) | (0x0000FFFF & (uint32_t)sFilterConfig->FilterMaskIdLow); } /* Filter Mode */ if (sFilterConfig->FilterMode == CAN_FILTERMODE_IDMASK) { /*Id/Mask mode for the filter*/ CLEAR_BIT(hcan->Instance->FM1R, filternbrbitpos); } else /* CAN_FilterInitStruct->CAN_FilterMode == CAN_FilterMode_IdList */ { /*Identifier list mode for the filter*/ SET_BIT(hcan->Instance->FM1R, filternbrbitpos); } /* Filter FIFO assignment */ if (sFilterConfig->FilterFIFOAssignment == CAN_FILTER_FIFO0) { /* FIFO 0 assignation for the filter */ CLEAR_BIT(hcan->Instance->FFA1R, filternbrbitpos); } else { /* FIFO 1 assignation for the filter */ SET_BIT(hcan->Instance->FFA1R, filternbrbitpos); } /* Filter activation */ if (sFilterConfig->FilterActivation == ENABLE) { SET_BIT(hcan->Instance->FA1R, filternbrbitpos); } /* Leave the initialisation mode for the filter */ CLEAR_BIT(hcan->Instance->FMR, ((uint32_t)CAN_FMR_FINIT)); /* Return function status */ return HAL_OK; } /** * @brief Deinitializes the CANx peripheral registers to their default reset values. * @param hcan: pointer to a CAN_HandleTypeDef structure that contains * the configuration information for the specified CAN. * @retval HAL status */ HAL_StatusTypeDef HAL_CAN_DeInit(CAN_HandleTypeDef* hcan) { /* Check CAN handle */ if(hcan == NULL) { return HAL_ERROR; } /* Check the parameters */ assert_param(IS_CAN_ALL_INSTANCE(hcan->Instance)); /* Change CAN state */ hcan->State = HAL_CAN_STATE_BUSY; /* DeInit the low level hardware */ HAL_CAN_MspDeInit(hcan); /* Change CAN state */ hcan->State = HAL_CAN_STATE_RESET; /* Release Lock */ __HAL_UNLOCK(hcan); /* Return function status */ return HAL_OK; } /** * @brief Initializes the CAN MSP. * @param hcan: pointer to a CAN_HandleTypeDef structure that contains * the configuration information for the specified CAN. * @retval None */ __weak void HAL_CAN_MspInit(CAN_HandleTypeDef* hcan) { /* NOTE : This function Should not be modified, when the callback is needed, the HAL_CAN_MspInit can be implemented in the user file */ } /** * @brief DeInitializes the CAN MSP. * @param hcan: pointer to a CAN_HandleTypeDef structure that contains * the configuration information for the specified CAN. * @retval None */ __weak void HAL_CAN_MspDeInit(CAN_HandleTypeDef* hcan) { /* NOTE : This function Should not be modified, when the callback is needed, the HAL_CAN_MspDeInit can be implemented in the user file */ } /** * @} */ /** @defgroup CAN_Exported_Functions_Group2 Input and Output operation functions * @brief I/O operation functions * @verbatim ============================================================================== ##### IO operation functions ##### ============================================================================== [..] This section provides functions allowing to: (+) Transmit a CAN frame message. (+) Receive a CAN frame message. (+) Enter CAN peripheral in sleep mode. (+) Wake up the CAN peripheral from sleep mode. @endverbatim * @{ */ /** * @brief Initiates and transmits a CAN frame message. * @param hcan: pointer to a CAN_HandleTypeDef structure that contains * the configuration information for the specified CAN. * @param Timeout: Specify Timeout value * @retval HAL status */ HAL_StatusTypeDef HAL_CAN_Transmit(CAN_HandleTypeDef* hcan, uint32_t Timeout) { uint32_t transmitmailbox = CAN_TXSTATUS_NOMAILBOX; uint32_t tickstart = 0; /* Check the parameters */ assert_param(IS_CAN_IDTYPE(hcan->pTxMsg->IDE)); assert_param(IS_CAN_RTR(hcan->pTxMsg->RTR)); assert_param(IS_CAN_DLC(hcan->pTxMsg->DLC)); /* Process locked */ __HAL_LOCK(hcan); if(hcan->State == HAL_CAN_STATE_BUSY_RX) { /* Change CAN state */ hcan->State = HAL_CAN_STATE_BUSY_TX_RX; } else { /* Change CAN state */ hcan->State = HAL_CAN_STATE_BUSY_TX; } /* Select one empty transmit mailbox */ if (HAL_IS_BIT_SET(hcan->Instance->TSR, CAN_TSR_TME0)) { transmitmailbox = 0; } else if (HAL_IS_BIT_SET(hcan->Instance->TSR, CAN_TSR_TME1)) { transmitmailbox = 1; } else if (HAL_IS_BIT_SET(hcan->Instance->TSR, CAN_TSR_TME2)) { transmitmailbox = 2; } else { transmitmailbox = CAN_TXSTATUS_NOMAILBOX; } if (transmitmailbox != CAN_TXSTATUS_NOMAILBOX) { /* Set up the Id */ hcan->Instance->sTxMailBox[transmitmailbox].TIR &= CAN_TI0R_TXRQ; if (hcan->pTxMsg->IDE == CAN_ID_STD) { assert_param(IS_CAN_STDID(hcan->pTxMsg->StdId)); hcan->Instance->sTxMailBox[transmitmailbox].TIR |= ((hcan->pTxMsg->StdId << CAN_TI0R_STID_BIT_POSITION) | hcan->pTxMsg->RTR); } else { assert_param(IS_CAN_EXTID(hcan->pTxMsg->ExtId)); hcan->Instance->sTxMailBox[transmitmailbox].TIR |= ((hcan->pTxMsg->ExtId << CAN_TI0R_EXID_BIT_POSITION) | hcan->pTxMsg->IDE | hcan->pTxMsg->RTR); } /* Set up the DLC */ hcan->pTxMsg->DLC &= (uint8_t)0x0000000F; hcan->Instance->sTxMailBox[transmitmailbox].TDTR &= (uint32_t)0xFFFFFFF0; hcan->Instance->sTxMailBox[transmitmailbox].TDTR |= hcan->pTxMsg->DLC; /* Set up the data field */ WRITE_REG(hcan->Instance->sTxMailBox[transmitmailbox].TDLR, ((uint32_t)hcan->pTxMsg->Data[3] << CAN_TDL0R_DATA3_BIT_POSITION) | ((uint32_t)hcan->pTxMsg->Data[2] << CAN_TDL0R_DATA2_BIT_POSITION) | ((uint32_t)hcan->pTxMsg->Data[1] << CAN_TDL0R_DATA1_BIT_POSITION) | ((uint32_t)hcan->pTxMsg->Data[0] << CAN_TDL0R_DATA0_BIT_POSITION) ); WRITE_REG(hcan->Instance->sTxMailBox[transmitmailbox].TDHR, ((uint32_t)hcan->pTxMsg->Data[7] << CAN_TDL0R_DATA3_BIT_POSITION) | ((uint32_t)hcan->pTxMsg->Data[6] << CAN_TDL0R_DATA2_BIT_POSITION) | ((uint32_t)hcan->pTxMsg->Data[5] << CAN_TDL0R_DATA1_BIT_POSITION) | ((uint32_t)hcan->pTxMsg->Data[4] << CAN_TDL0R_DATA0_BIT_POSITION) ); /* Request transmission */ SET_BIT(hcan->Instance->sTxMailBox[transmitmailbox].TIR, CAN_TI0R_TXRQ); /* Get timeout */ tickstart = HAL_GetTick(); /* Check End of transmission flag */ while(!(__HAL_CAN_TRANSMIT_STATUS(hcan, transmitmailbox))) { /* Check for the Timeout */ if(Timeout != HAL_MAX_DELAY) { if((Timeout == 0) || ((HAL_GetTick()-tickstart) > Timeout)) { hcan->State = HAL_CAN_STATE_TIMEOUT; /* Process unlocked */ __HAL_UNLOCK(hcan); return HAL_TIMEOUT; } } } if(hcan->State == HAL_CAN_STATE_BUSY_TX_RX) { /* Change CAN state */ hcan->State = HAL_CAN_STATE_BUSY_RX; /* Process unlocked */ __HAL_UNLOCK(hcan); } else { /* Change CAN state */ hcan->State = HAL_CAN_STATE_READY; } /* Process unlocked */ __HAL_UNLOCK(hcan); /* Return function status */ return HAL_OK; } else { /* Change CAN state */ hcan->State = HAL_CAN_STATE_ERROR; /* Process unlocked */ __HAL_UNLOCK(hcan); /* Return function status */ return HAL_ERROR; } } /** * @brief Initiates and transmits a CAN frame message. * @param hcan: pointer to a CAN_HandleTypeDef structure that contains * the configuration information for the specified CAN. * @retval HAL status */ HAL_StatusTypeDef HAL_CAN_Transmit_IT(CAN_HandleTypeDef* hcan) { uint32_t transmitmailbox = CAN_TXSTATUS_NOMAILBOX; /* Check the parameters */ assert_param(IS_CAN_IDTYPE(hcan->pTxMsg->IDE)); assert_param(IS_CAN_RTR(hcan->pTxMsg->RTR)); assert_param(IS_CAN_DLC(hcan->pTxMsg->DLC)); if((hcan->State == HAL_CAN_STATE_READY) || (hcan->State == HAL_CAN_STATE_BUSY_RX)) { /* Process Locked */ __HAL_LOCK(hcan); /* Select one empty transmit mailbox */ if(HAL_IS_BIT_SET(hcan->Instance->TSR, CAN_TSR_TME0)) { transmitmailbox = 0; } else if(HAL_IS_BIT_SET(hcan->Instance->TSR, CAN_TSR_TME1)) { transmitmailbox = 1; } else if(HAL_IS_BIT_SET(hcan->Instance->TSR, CAN_TSR_TME2)) { transmitmailbox = 2; } else { transmitmailbox = CAN_TXSTATUS_NOMAILBOX; } if(transmitmailbox != CAN_TXSTATUS_NOMAILBOX) { /* Set up the Id */ hcan->Instance->sTxMailBox[transmitmailbox].TIR &= CAN_TI0R_TXRQ; if (hcan->pTxMsg->IDE == CAN_ID_STD) { assert_param(IS_CAN_STDID(hcan->pTxMsg->StdId)); hcan->Instance->sTxMailBox[transmitmailbox].TIR |= ((hcan->pTxMsg->StdId << CAN_TI0R_STID_BIT_POSITION) | hcan->pTxMsg->RTR); } else { assert_param(IS_CAN_EXTID(hcan->pTxMsg->ExtId)); hcan->Instance->sTxMailBox[transmitmailbox].TIR |= ((hcan->pTxMsg->ExtId << CAN_TI0R_EXID_BIT_POSITION) | hcan->pTxMsg->IDE | hcan->pTxMsg->RTR); } /* Set up the DLC */ hcan->pTxMsg->DLC &= (uint8_t)0x0000000F; hcan->Instance->sTxMailBox[transmitmailbox].TDTR &= (uint32_t)0xFFFFFFF0; hcan->Instance->sTxMailBox[transmitmailbox].TDTR |= hcan->pTxMsg->DLC; /* Set up the data field */ WRITE_REG(hcan->Instance->sTxMailBox[transmitmailbox].TDLR, ((uint32_t)hcan->pTxMsg->Data[3] << CAN_TDL0R_DATA3_BIT_POSITION) | ((uint32_t)hcan->pTxMsg->Data[2] << CAN_TDL0R_DATA2_BIT_POSITION) | ((uint32_t)hcan->pTxMsg->Data[1] << CAN_TDL0R_DATA1_BIT_POSITION) | ((uint32_t)hcan->pTxMsg->Data[0] << CAN_TDL0R_DATA0_BIT_POSITION) ); WRITE_REG(hcan->Instance->sTxMailBox[transmitmailbox].TDHR, ((uint32_t)hcan->pTxMsg->Data[7] << CAN_TDL0R_DATA3_BIT_POSITION) | ((uint32_t)hcan->pTxMsg->Data[6] << CAN_TDL0R_DATA2_BIT_POSITION) | ((uint32_t)hcan->pTxMsg->Data[5] << CAN_TDL0R_DATA1_BIT_POSITION) | ((uint32_t)hcan->pTxMsg->Data[4] << CAN_TDL0R_DATA0_BIT_POSITION) ); if(hcan->State == HAL_CAN_STATE_BUSY_RX) { /* Change CAN state */ hcan->State = HAL_CAN_STATE_BUSY_TX_RX; } else { /* Change CAN state */ hcan->State = HAL_CAN_STATE_BUSY_TX; } /* Set CAN error code to none */ hcan->ErrorCode = HAL_CAN_ERROR_NONE; /* Process Unlocked */ __HAL_UNLOCK(hcan); /* Enable interrupts: */ /* - Enable Error warning Interrupt */ /* - Enable Error passive Interrupt */ /* - Enable Bus-off Interrupt */ /* - Enable Last error code Interrupt */ /* - Enable Error Interrupt */ /* - Enable Transmit mailbox empty Interrupt */ __HAL_CAN_ENABLE_IT(hcan, CAN_IT_EWG | CAN_IT_EPV | CAN_IT_BOF | CAN_IT_LEC | CAN_IT_ERR | CAN_IT_TME ); /* Request transmission */ hcan->Instance->sTxMailBox[transmitmailbox].TIR |= CAN_TI0R_TXRQ; } } else { return HAL_BUSY; } return HAL_OK; } /** * @brief Receives a correct CAN frame. * @param hcan: pointer to a CAN_HandleTypeDef structure that contains * the configuration information for the specified CAN. * @param FIFONumber: FIFO Number value * @param Timeout: Specify Timeout value * @retval HAL status * @retval None */ HAL_StatusTypeDef HAL_CAN_Receive(CAN_HandleTypeDef* hcan, uint8_t FIFONumber, uint32_t Timeout) { uint32_t tickstart = 0; /* Check the parameters */ assert_param(IS_CAN_FIFO(FIFONumber)); /* Process locked */ __HAL_LOCK(hcan); if(hcan->State == HAL_CAN_STATE_BUSY_TX) { /* Change CAN state */ hcan->State = HAL_CAN_STATE_BUSY_TX_RX; } else { /* Change CAN state */ hcan->State = HAL_CAN_STATE_BUSY_RX; } /* Get tick */ tickstart = HAL_GetTick(); /* Check pending message */ while(__HAL_CAN_MSG_PENDING(hcan, FIFONumber) == 0) { /* Check for the Timeout */ if(Timeout != HAL_MAX_DELAY) { if((Timeout == 0) || ((HAL_GetTick()-tickstart) > Timeout)) { hcan->State = HAL_CAN_STATE_TIMEOUT; /* Process unlocked */ __HAL_UNLOCK(hcan); return HAL_TIMEOUT; } } } /* Get the Id */ hcan->pRxMsg->IDE = (uint8_t)CAN_ID_EXT & hcan->Instance->sFIFOMailBox[FIFONumber].RIR; if (hcan->pRxMsg->IDE == CAN_ID_STD) { hcan->pRxMsg->StdId = (uint32_t)0x000007FF & (hcan->Instance->sFIFOMailBox[FIFONumber].RIR >> 21); } else { hcan->pRxMsg->ExtId = (uint32_t)0x1FFFFFFF & (hcan->Instance->sFIFOMailBox[FIFONumber].RIR >> 3); } hcan->pRxMsg->RTR = (uint8_t)CAN_RTR_REMOTE & hcan->Instance->sFIFOMailBox[FIFONumber].RIR; /* Get the DLC */ hcan->pRxMsg->DLC = (uint8_t)0x0F & hcan->Instance->sFIFOMailBox[FIFONumber].RDTR; /* Get the FMI */ hcan->pRxMsg->FMI = (uint8_t)0xFF & (hcan->Instance->sFIFOMailBox[FIFONumber].RDTR >> 8); /* Get the data field */ hcan->pRxMsg->Data[0] = (uint8_t)0xFF & hcan->Instance->sFIFOMailBox[FIFONumber].RDLR; hcan->pRxMsg->Data[1] = (uint8_t)0xFF & (hcan->Instance->sFIFOMailBox[FIFONumber].RDLR >> 8); hcan->pRxMsg->Data[2] = (uint8_t)0xFF & (hcan->Instance->sFIFOMailBox[FIFONumber].RDLR >> 16); hcan->pRxMsg->Data[3] = (uint8_t)0xFF & (hcan->Instance->sFIFOMailBox[FIFONumber].RDLR >> 24); hcan->pRxMsg->Data[4] = (uint8_t)0xFF & hcan->Instance->sFIFOMailBox[FIFONumber].RDHR; hcan->pRxMsg->Data[5] = (uint8_t)0xFF & (hcan->Instance->sFIFOMailBox[FIFONumber].RDHR >> 8); hcan->pRxMsg->Data[6] = (uint8_t)0xFF & (hcan->Instance->sFIFOMailBox[FIFONumber].RDHR >> 16); hcan->pRxMsg->Data[7] = (uint8_t)0xFF & (hcan->Instance->sFIFOMailBox[FIFONumber].RDHR >> 24); /* Release the FIFO */ if(FIFONumber == CAN_FIFO0) { /* Release FIFO0 */ __HAL_CAN_FIFO_RELEASE(hcan, CAN_FIFO0); } else /* FIFONumber == CAN_FIFO1 */ { /* Release FIFO1 */ __HAL_CAN_FIFO_RELEASE(hcan, CAN_FIFO1); } if(hcan->State == HAL_CAN_STATE_BUSY_TX_RX) { /* Change CAN state */ hcan->State = HAL_CAN_STATE_BUSY_TX; } else { /* Change CAN state */ hcan->State = HAL_CAN_STATE_READY; } /* Process unlocked */ __HAL_UNLOCK(hcan); /* Return function status */ return HAL_OK; } /** * @brief Receives a correct CAN frame. * @param hcan: pointer to a CAN_HandleTypeDef structure that contains * the configuration information for the specified CAN. * @param FIFONumber: Specify the FIFO number * @retval HAL status * @retval None */ HAL_StatusTypeDef HAL_CAN_Receive_IT(CAN_HandleTypeDef* hcan, uint8_t FIFONumber) { /* Check the parameters */ assert_param(IS_CAN_FIFO(FIFONumber)); if((hcan->State == HAL_CAN_STATE_READY) || (hcan->State == HAL_CAN_STATE_BUSY_TX)) { /* Process locked */ __HAL_LOCK(hcan); if(hcan->State == HAL_CAN_STATE_BUSY_TX) { /* Change CAN state */ hcan->State = HAL_CAN_STATE_BUSY_TX_RX; } else { /* Change CAN state */ hcan->State = HAL_CAN_STATE_BUSY_RX; } /* Set CAN error code to none */ hcan->ErrorCode = HAL_CAN_ERROR_NONE; /* Enable interrupts: */ /* - Enable Error warning Interrupt */ /* - Enable Error passive Interrupt */ /* - Enable Bus-off Interrupt */ /* - Enable Last error code Interrupt */ /* - Enable Error Interrupt */ /* - Enable Transmit mailbox empty Interrupt */ __HAL_CAN_ENABLE_IT(hcan, CAN_IT_EWG | CAN_IT_EPV | CAN_IT_BOF | CAN_IT_LEC | CAN_IT_ERR | CAN_IT_TME ); /* Process unlocked */ __HAL_UNLOCK(hcan); if(FIFONumber == CAN_FIFO0) { /* Enable FIFO 0 message pending Interrupt */ __HAL_CAN_ENABLE_IT(hcan, CAN_IT_FMP0); } else { /* Enable FIFO 1 message pending Interrupt */ __HAL_CAN_ENABLE_IT(hcan, CAN_IT_FMP1); } } else { return HAL_BUSY; } /* Return function status */ return HAL_OK; } /** * @brief Enters the Sleep (low power) mode. * @param hcan: pointer to a CAN_HandleTypeDef structure that contains * the configuration information for the specified CAN. * @retval HAL status. */ HAL_StatusTypeDef HAL_CAN_Sleep(CAN_HandleTypeDef* hcan) { uint32_t tickstart = 0; /* Process locked */ __HAL_LOCK(hcan); /* Change CAN state */ hcan->State = HAL_CAN_STATE_BUSY; /* Request Sleep mode */ MODIFY_REG(hcan->Instance->MCR, CAN_MCR_INRQ , CAN_MCR_SLEEP ); /* Sleep mode status */ if (HAL_IS_BIT_CLR(hcan->Instance->MSR, CAN_MSR_SLAK) || HAL_IS_BIT_SET(hcan->Instance->MSR, CAN_MSR_INAK) ) { /* Process unlocked */ __HAL_UNLOCK(hcan); /* Return function status */ return HAL_ERROR; } /* Get tick */ tickstart = HAL_GetTick(); /* Wait the acknowledge */ while (HAL_IS_BIT_CLR(hcan->Instance->MSR, CAN_MSR_SLAK) || HAL_IS_BIT_SET(hcan->Instance->MSR, CAN_MSR_INAK) ) { if((HAL_GetTick()-tickstart) > CAN_TIMEOUT_VALUE) { hcan->State = HAL_CAN_STATE_TIMEOUT; /* Process unlocked */ __HAL_UNLOCK(hcan); return HAL_TIMEOUT; } } /* Change CAN state */ hcan->State = HAL_CAN_STATE_READY; /* Process unlocked */ __HAL_UNLOCK(hcan); /* Return function status */ return HAL_OK; } /** * @brief Wakes up the CAN peripheral from sleep mode, after that the CAN peripheral * is in the normal mode. * @param hcan: pointer to a CAN_HandleTypeDef structure that contains * the configuration information for the specified CAN. * @retval HAL status. */ HAL_StatusTypeDef HAL_CAN_WakeUp(CAN_HandleTypeDef* hcan) { uint32_t tickstart = 0; /* Process locked */ __HAL_LOCK(hcan); /* Change CAN state */ hcan->State = HAL_CAN_STATE_BUSY; /* Wake up request */ CLEAR_BIT(hcan->Instance->MCR, CAN_MCR_SLEEP); /* Get timeout */ tickstart = HAL_GetTick(); /* Sleep mode status */ while((hcan->Instance->MSR & CAN_MSR_SLAK) == CAN_MSR_SLAK) { if((HAL_GetTick()-tickstart) > CAN_TIMEOUT_VALUE) { hcan->State= HAL_CAN_STATE_TIMEOUT; /* Process unlocked */ __HAL_UNLOCK(hcan); return HAL_TIMEOUT; } } if(HAL_IS_BIT_SET(hcan->Instance->MSR, CAN_MSR_SLAK)) { /* Process unlocked */ __HAL_UNLOCK(hcan); /* Return function status */ return HAL_ERROR; } /* Change CAN state */ hcan->State = HAL_CAN_STATE_READY; /* Process unlocked */ __HAL_UNLOCK(hcan); /* Return function status */ return HAL_OK; } /** * @brief Handles CAN interrupt request * @param hcan: pointer to a CAN_HandleTypeDef structure that contains * the configuration information for the specified CAN. * @retval None */ void HAL_CAN_IRQHandler(CAN_HandleTypeDef* hcan) { /* Check End of transmission flag */ if(__HAL_CAN_GET_IT_SOURCE(hcan, CAN_IT_TME)) { if((__HAL_CAN_TRANSMIT_STATUS(hcan, CAN_TXMAILBOX_0)) || (__HAL_CAN_TRANSMIT_STATUS(hcan, CAN_TXMAILBOX_1)) || (__HAL_CAN_TRANSMIT_STATUS(hcan, CAN_TXMAILBOX_2))) { /* Call transmit function */ CAN_Transmit_IT(hcan); } } /* Check End of reception flag for FIFO0 */ if((__HAL_CAN_GET_IT_SOURCE(hcan, CAN_IT_FMP0)) && (__HAL_CAN_MSG_PENDING(hcan, CAN_FIFO0) != 0)) { /* Call receive function */ CAN_Receive_IT(hcan, CAN_FIFO0); } /* Check End of reception flag for FIFO1 */ if((__HAL_CAN_GET_IT_SOURCE(hcan, CAN_IT_FMP1)) && (__HAL_CAN_MSG_PENDING(hcan, CAN_FIFO1) != 0)) { /* Call receive function */ CAN_Receive_IT(hcan, CAN_FIFO1); } /* Check Error Warning Flag */ if((__HAL_CAN_GET_FLAG(hcan, CAN_FLAG_EWG)) && (__HAL_CAN_GET_IT_SOURCE(hcan, CAN_IT_EWG)) && (__HAL_CAN_GET_IT_SOURCE(hcan, CAN_IT_ERR))) { /* Set CAN error code to EWG error */ hcan->ErrorCode |= HAL_CAN_ERROR_EWG; /* No need for clear of Error Warning Flag as read-only */ } /* Check Error Passive Flag */ if((__HAL_CAN_GET_FLAG(hcan, CAN_FLAG_EPV)) && (__HAL_CAN_GET_IT_SOURCE(hcan, CAN_IT_EPV)) && (__HAL_CAN_GET_IT_SOURCE(hcan, CAN_IT_ERR))) { /* Set CAN error code to EPV error */ hcan->ErrorCode |= HAL_CAN_ERROR_EPV; /* No need for clear of Error Passive Flag as read-only */ } /* Check Bus-Off Flag */ if((__HAL_CAN_GET_FLAG(hcan, CAN_FLAG_BOF)) && (__HAL_CAN_GET_IT_SOURCE(hcan, CAN_IT_BOF)) && (__HAL_CAN_GET_IT_SOURCE(hcan, CAN_IT_ERR))) { /* Set CAN error code to BOF error */ hcan->ErrorCode |= HAL_CAN_ERROR_BOF; /* No need for clear of Bus-Off Flag as read-only */ } /* Check Last error code Flag */ if((!HAL_IS_BIT_CLR(hcan->Instance->ESR, CAN_ESR_LEC)) && (__HAL_CAN_GET_IT_SOURCE(hcan, CAN_IT_LEC)) && (__HAL_CAN_GET_IT_SOURCE(hcan, CAN_IT_ERR))) { switch(hcan->Instance->ESR & CAN_ESR_LEC) { case(CAN_ESR_LEC_0): /* Set CAN error code to STF error */ hcan->ErrorCode |= HAL_CAN_ERROR_STF; break; case(CAN_ESR_LEC_1): /* Set CAN error code to FOR error */ hcan->ErrorCode |= HAL_CAN_ERROR_FOR; break; case(CAN_ESR_LEC_1 | CAN_ESR_LEC_0): /* Set CAN error code to ACK error */ hcan->ErrorCode |= HAL_CAN_ERROR_ACK; break; case(CAN_ESR_LEC_2): /* Set CAN error code to BR error */ hcan->ErrorCode |= HAL_CAN_ERROR_BR; break; case(CAN_ESR_LEC_2 | CAN_ESR_LEC_0): /* Set CAN error code to BD error */ hcan->ErrorCode |= HAL_CAN_ERROR_BD; break; case(CAN_ESR_LEC_2 | CAN_ESR_LEC_1): /* Set CAN error code to CRC error */ hcan->ErrorCode |= HAL_CAN_ERROR_CRC; break; default: break; } /* Clear Last error code Flag */ CLEAR_BIT(hcan->Instance->ESR, CAN_ESR_LEC); } /* Call the Error call Back in case of Errors */ if(hcan->ErrorCode != HAL_CAN_ERROR_NONE) { /* Set the CAN state ready to be able to start again the process */ hcan->State = HAL_CAN_STATE_READY; /* Call Error callback function */ HAL_CAN_ErrorCallback(hcan); } } /** * @brief Transmission complete callback in non blocking mode * @param hcan: pointer to a CAN_HandleTypeDef structure that contains * the configuration information for the specified CAN. * @retval None */ __weak void HAL_CAN_TxCpltCallback(CAN_HandleTypeDef* hcan) { /* NOTE : This function Should not be modified, when the callback is needed, the HAL_CAN_TxCpltCallback can be implemented in the user file */ } /** * @brief Transmission complete callback in non blocking mode * @param hcan: pointer to a CAN_HandleTypeDef structure that contains * the configuration information for the specified CAN. * @retval None */ __weak void HAL_CAN_RxCpltCallback(CAN_HandleTypeDef* hcan) { /* NOTE : This function Should not be modified, when the callback is needed, the HAL_CAN_RxCpltCallback can be implemented in the user file */ } /** * @brief Error CAN callback. * @param hcan: pointer to a CAN_HandleTypeDef structure that contains * the configuration information for the specified CAN. * @retval None */ __weak void HAL_CAN_ErrorCallback(CAN_HandleTypeDef *hcan) { /* NOTE : This function Should not be modified, when the callback is needed, the HAL_CAN_ErrorCallback can be implemented in the user file */ } /** * @} */ /** @defgroup CAN_Exported_Functions_Group3 Peripheral State and Error functions * @brief CAN Peripheral State functions * @verbatim ============================================================================== ##### Peripheral State and Error functions ##### ============================================================================== [..] This subsection provides functions allowing to : (+) Check the CAN state. (+) Check CAN Errors detected during interrupt process @endverbatim * @{ */ /** * @brief return the CAN state * @param hcan: pointer to a CAN_HandleTypeDef structure that contains * the configuration information for the specified CAN. * @retval HAL state */ HAL_CAN_StateTypeDef HAL_CAN_GetState(CAN_HandleTypeDef* hcan) { /* Return CAN state */ return hcan->State; } /** * @brief Return the CAN error code * @param hcan: pointer to a CAN_HandleTypeDef structure that contains * the configuration information for the specified CAN. * @retval CAN Error Code */ uint32_t HAL_CAN_GetError(CAN_HandleTypeDef *hcan) { return hcan->ErrorCode; } /** * @} */ /** * @} */ /** @defgroup CAN_Private_Functions CAN Private Functions * @{ */ /** * @brief Initiates and transmits a CAN frame message. * @param hcan: pointer to a CAN_HandleTypeDef structure that contains * the configuration information for the specified CAN. * @retval HAL status */ static HAL_StatusTypeDef CAN_Transmit_IT(CAN_HandleTypeDef* hcan) { /* Disable Transmit mailbox empty Interrupt */ __HAL_CAN_DISABLE_IT(hcan, CAN_IT_TME); if(hcan->State == HAL_CAN_STATE_BUSY_TX) { /* Disable interrupts: */ /* - Disable Error warning Interrupt */ /* - Disable Error passive Interrupt */ /* - Disable Bus-off Interrupt */ /* - Disable Last error code Interrupt */ /* - Disable Error Interrupt */ __HAL_CAN_DISABLE_IT(hcan, CAN_IT_EWG | CAN_IT_EPV | CAN_IT_BOF | CAN_IT_LEC | CAN_IT_ERR ); } if(hcan->State == HAL_CAN_STATE_BUSY_TX_RX) { /* Change CAN state */ hcan->State = HAL_CAN_STATE_BUSY_RX; } else { /* Change CAN state */ hcan->State = HAL_CAN_STATE_READY; } /* Transmission complete callback */ HAL_CAN_TxCpltCallback(hcan); return HAL_OK; } /** * @brief Receives a correct CAN frame. * @param hcan: Pointer to a CAN_HandleTypeDef structure that contains * the configuration information for the specified CAN. * @param FIFONumber: Specify the FIFO number * @retval HAL status * @retval None */ static HAL_StatusTypeDef CAN_Receive_IT(CAN_HandleTypeDef* hcan, uint8_t FIFONumber) { /* Get the Id */ hcan->pRxMsg->IDE = (uint8_t)0x04 & hcan->Instance->sFIFOMailBox[FIFONumber].RIR; if (hcan->pRxMsg->IDE == CAN_ID_STD) { hcan->pRxMsg->StdId = (uint32_t)0x000007FF & (hcan->Instance->sFIFOMailBox[FIFONumber].RIR >> 21); } else { hcan->pRxMsg->ExtId = (uint32_t)0x1FFFFFFF & (hcan->Instance->sFIFOMailBox[FIFONumber].RIR >> 3); } hcan->pRxMsg->RTR = (uint8_t)0x02 & hcan->Instance->sFIFOMailBox[FIFONumber].RIR; /* Get the DLC */ hcan->pRxMsg->DLC = (uint8_t)0x0F & hcan->Instance->sFIFOMailBox[FIFONumber].RDTR; /* Get the FMI */ hcan->pRxMsg->FMI = (uint8_t)0xFF & (hcan->Instance->sFIFOMailBox[FIFONumber].RDTR >> 8); /* Get the data field */ hcan->pRxMsg->Data[0] = (uint8_t)0xFF & hcan->Instance->sFIFOMailBox[FIFONumber].RDLR; hcan->pRxMsg->Data[1] = (uint8_t)0xFF & (hcan->Instance->sFIFOMailBox[FIFONumber].RDLR >> 8); hcan->pRxMsg->Data[2] = (uint8_t)0xFF & (hcan->Instance->sFIFOMailBox[FIFONumber].RDLR >> 16); hcan->pRxMsg->Data[3] = (uint8_t)0xFF & (hcan->Instance->sFIFOMailBox[FIFONumber].RDLR >> 24); hcan->pRxMsg->Data[4] = (uint8_t)0xFF & hcan->Instance->sFIFOMailBox[FIFONumber].RDHR; hcan->pRxMsg->Data[5] = (uint8_t)0xFF & (hcan->Instance->sFIFOMailBox[FIFONumber].RDHR >> 8); hcan->pRxMsg->Data[6] = (uint8_t)0xFF & (hcan->Instance->sFIFOMailBox[FIFONumber].RDHR >> 16); hcan->pRxMsg->Data[7] = (uint8_t)0xFF & (hcan->Instance->sFIFOMailBox[FIFONumber].RDHR >> 24); /* Release the FIFO */ /* Release FIFO0 */ if (FIFONumber == CAN_FIFO0) { __HAL_CAN_FIFO_RELEASE(hcan, CAN_FIFO0); /* Disable FIFO 0 message pending Interrupt */ __HAL_CAN_DISABLE_IT(hcan, CAN_IT_FMP0); } /* Release FIFO1 */ else /* FIFONumber == CAN_FIFO1 */ { __HAL_CAN_FIFO_RELEASE(hcan, CAN_FIFO1); /* Disable FIFO 1 message pending Interrupt */ __HAL_CAN_DISABLE_IT(hcan, CAN_IT_FMP1); } if(hcan->State == HAL_CAN_STATE_BUSY_RX) { /* Disable interrupts: */ /* - Disable Error warning Interrupt */ /* - Disable Error passive Interrupt */ /* - Disable Bus-off Interrupt */ /* - Disable Last error code Interrupt */ /* - Disable Error Interrupt */ __HAL_CAN_DISABLE_IT(hcan, CAN_IT_EWG | CAN_IT_EPV | CAN_IT_BOF | CAN_IT_LEC | CAN_IT_ERR ); } if(hcan->State == HAL_CAN_STATE_BUSY_TX_RX) { /* Disable CAN state */ hcan->State = HAL_CAN_STATE_BUSY_TX; } else { /* Change CAN state */ hcan->State = HAL_CAN_STATE_READY; } /* Receive complete callback */ HAL_CAN_RxCpltCallback(hcan); /* Return function status */ return HAL_OK; } /** * @} */ /** * @} */ #endif /* STM32F103x6) || STM32F103xB || STM32F103xE || */ /* STM32F103xG) || STM32F105xC || STM32F107xC */ #endif /* HAL_CAN_MODULE_ENABLED */ /** * @} */ /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/