/**
  ******************************************************************************
  * @file    stm32l0xx_hal_i2s.h
  * @author  MCD Application Team
  * @version V1.2.0
  * @date    06-February-2015
  * @brief   Header file of I2S HAL module.
  ******************************************************************************
  * @attention
  *
  * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
  *
  * Redistribution and use in source and binary forms, with or without modification,
  * are permitted provided that the following conditions are met:
  *   1. Redistributions of source code must retain the above copyright notice,
  *      this list of conditions and the following disclaimer.
  *   2. Redistributions in binary form must reproduce the above copyright notice,
  *      this list of conditions and the following disclaimer in the documentation
  *      and/or other materials provided with the distribution.
  *   3. Neither the name of STMicroelectronics nor the names of its contributors
  *      may be used to endorse or promote products derived from this software
  *      without specific prior written permission.
  *
  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  *
  ******************************************************************************
  */ 

/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32L0xx_HAL_I2S_H
#define __STM32L0xx_HAL_I2S_H

#ifdef __cplusplus
 extern "C" {
#endif

#if !defined (STM32L031xx) && !defined (STM32L041xx)
/* Includes ------------------------------------------------------------------*/
#include "stm32l0xx_hal_def.h"  

/** @addtogroup STM32L0xx_HAL_Driver
  * @{
  */

/** @addtogroup I2S
  * @{
  */ 

/* Exported types ------------------------------------------------------------*/
/** @defgroup I2S_Exported_Types I2S Exported Types
  * @{
  */

/** 
  * @brief I2S Init structure definition  
  */
typedef struct
{
  uint32_t Mode;         /*!< Specifies the I2S operating mode.
                              This parameter can be a value of @ref I2S_Mode */

  uint32_t Standard;     /*!< Specifies the standard used for the I2S communication.
                              This parameter can be a value of @ref I2S_Standard */

  uint32_t DataFormat;   /*!< Specifies the data format for the I2S communication.
                              This parameter can be a value of @ref I2S_Data_Format */

  uint32_t MCLKOutput;   /*!< Specifies whether the I2S MCLK output is enabled or not.
                              This parameter can be a value of @ref I2S_MCLK_Output */

  uint32_t AudioFreq;    /*!< Specifies the frequency selected for the I2S communication.
                              This parameter can be a value of @ref I2S_Audio_Frequency */

  uint32_t CPOL;         /*!< Specifies the idle state of the I2S clock.
                              This parameter can be a value of @ref I2S_Clock_Polarity */

}I2S_InitTypeDef;

/** 
  * @brief  HAL State structures definition
  */ 
typedef enum
{
  HAL_I2S_STATE_RESET      = 0x00,  /*!< I2S not yet initialized or disabled                */
  HAL_I2S_STATE_READY      = 0x01,  /*!< I2S initialized and ready for use                  */
  HAL_I2S_STATE_BUSY       = 0x02,  /*!< I2S internal process is ongoing                    */   
  HAL_I2S_STATE_BUSY_TX    = 0x12,  /*!< Data Transmission process is ongoing               */ 
  HAL_I2S_STATE_BUSY_RX    = 0x22,  /*!< Data Reception process is ongoing                  */
  HAL_I2S_STATE_TIMEOUT    = 0x03,  /*!< I2S timeout state                                  */ 
  HAL_I2S_STATE_ERROR      = 0x04   /*!< I2S error state                                    */      
}HAL_I2S_StateTypeDef;

/** 
  * @brief I2S handle Structure definition  
  */
typedef struct
{
  SPI_TypeDef                *Instance;    /* I2S registers base address        */

  I2S_InitTypeDef            Init;         /* I2S communication parameters      */
  
  uint16_t                   *pTxBuffPtr;  /* Pointer to I2S Tx transfer buffer */
  
  __IO uint16_t              TxXferSize;   /* I2S Tx transfer size              */
  
  __IO uint16_t              TxXferCount;  /* I2S Tx transfer Counter           */
  
  uint16_t                   *pRxBuffPtr;  /* Pointer to I2S Rx transfer buffer */
  
  __IO uint16_t              RxXferSize;   /* I2S Rx transfer size              */
  
  __IO uint16_t              RxXferCount;  /* I2S Rx transfer counter 
                                              (This field is initialized at the 
                                               same value as transfer size at the 
                                               beginning of the transfer and 
                                               decremented when a sample is received. 
                                               NbSamplesReceived = RxBufferSize-RxBufferCount) */

  DMA_HandleTypeDef          *hdmatx;      /* I2S Tx DMA handle parameters      */

  DMA_HandleTypeDef          *hdmarx;      /* I2S Rx DMA handle parameters      */
  
  __IO HAL_LockTypeDef       Lock;         /* I2S locking object                */
  
  __IO HAL_I2S_StateTypeDef  State;        /* I2S communication state           */

  __IO  uint32_t             ErrorCode;    /* I2S Error code                    */

}I2S_HandleTypeDef;
/**
  * @}
  */

/* Exported constants --------------------------------------------------------*/
/** @defgroup I2S_Exported_Constants I2S Exported Constants
  * @{
  */

/**
  * @defgroup  I2S_ErrorCode I2S Error Code
  * @{
  */
#define HAL_I2S_ERROR_NONE      ((uint32_t)0x00)    /*!< No error                    */
#define HAL_I2S_ERROR_UDR       ((uint32_t)0x01)    /*!< I2S Underrun error          */
#define HAL_I2S_ERROR_OVR       ((uint32_t)0x02)    /*!< I2S Overrun error           */
#define HAL_I2S_ERROR_FRE       ((uint32_t)0x04)    /*!< I2S Frame format error      */
#define HAL_I2S_ERROR_DMA       ((uint32_t)0x08)    /*!< DMA transfer error          */
  /**
    * @}
    */

/** @defgroup I2S_Mode I2S Mode
  * @{
  */
#define I2S_MODE_SLAVE_TX                ((uint32_t) 0x00000000)
#define I2S_MODE_SLAVE_RX                ((uint32_t) SPI_I2SCFGR_I2SCFG_0)
#define I2S_MODE_MASTER_TX               ((uint32_t) SPI_I2SCFGR_I2SCFG_1)
#define I2S_MODE_MASTER_RX               ((uint32_t)(SPI_I2SCFGR_I2SCFG_0 |\
                                                     SPI_I2SCFGR_I2SCFG_1))
/**
  * @}
  */
  
/** @defgroup I2S_Standard I2S Standard
  * @{
  */
#define I2S_STANDARD_PHILIPS             ((uint32_t) 0x00000000)
#define I2S_STANDARD_MSB                 ((uint32_t) SPI_I2SCFGR_I2SSTD_0)
#define I2S_STANDARD_LSB                 ((uint32_t) SPI_I2SCFGR_I2SSTD_1)
#define I2S_STANDARD_PCM_SHORT           ((uint32_t)(SPI_I2SCFGR_I2SSTD_0 |\
                                                     SPI_I2SCFGR_I2SSTD_1))
#define I2S_STANDARD_PCM_LONG            ((uint32_t)(SPI_I2SCFGR_I2SSTD_0 |\
                                                     SPI_I2SCFGR_I2SSTD_1 |\
                                                     SPI_I2SCFGR_PCMSYNC))
/** @defgroup I2S_Legacy I2S Legacy
  * @{
  */
#define I2S_STANDARD_PHILLIPS      I2S_STANDARD_PHILIPS
/**
  * @}
  */

/**
  * @}
  */
  
/** @defgroup I2S_Data_Format I2S Data Format
  * @{
  */
#define I2S_DATAFORMAT_16B               ((uint32_t) 0x00000000)
#define I2S_DATAFORMAT_16B_EXTENDED      ((uint32_t) SPI_I2SCFGR_CHLEN)
#define I2S_DATAFORMAT_24B               ((uint32_t)(SPI_I2SCFGR_CHLEN | SPI_I2SCFGR_DATLEN_0))
#define I2S_DATAFORMAT_32B               ((uint32_t)(SPI_I2SCFGR_CHLEN | SPI_I2SCFGR_DATLEN_1))
/**
  * @}
  */

/** @defgroup I2S_MCLK_Output I2S MCLK Output
  * @{
  */
#define I2S_MCLKOUTPUT_ENABLE           ((uint32_t)SPI_I2SPR_MCKOE)
#define I2S_MCLKOUTPUT_DISABLE          ((uint32_t)0x00000000)
/**
  * @}
  */

/** @defgroup I2S_Audio_Frequency I2S Audio Frequency
  * @{
  */
#define I2S_AUDIOFREQ_192K               ((uint32_t)192000)
#define I2S_AUDIOFREQ_96K                ((uint32_t)96000)
#define I2S_AUDIOFREQ_48K                ((uint32_t)48000)
#define I2S_AUDIOFREQ_44K                ((uint32_t)44100)
#define I2S_AUDIOFREQ_32K                ((uint32_t)32000)
#define I2S_AUDIOFREQ_22K                ((uint32_t)22050)
#define I2S_AUDIOFREQ_16K                ((uint32_t)16000)
#define I2S_AUDIOFREQ_11K                ((uint32_t)11025)
#define I2S_AUDIOFREQ_8K                 ((uint32_t)8000)
#define I2S_AUDIOFREQ_DEFAULT            ((uint32_t)2)
/**
  * @}
  */

/** @defgroup I2S_Clock_Polarity I2S Clock Polarity
  * @{
  */
#define I2S_CPOL_LOW                    ((uint32_t)0x00000000)
#define I2S_CPOL_HIGH                   ((uint32_t)SPI_I2SCFGR_CKPOL)
/**
  * @}
  */

/** @defgroup I2S_Interrupt_configuration_definition I2S Interrupt configuration definition
  * @{
  */
#define I2S_IT_TXE                      SPI_CR2_TXEIE
#define I2S_IT_RXNE                     SPI_CR2_RXNEIE
#define I2S_IT_ERR                      SPI_CR2_ERRIE
/**
  * @}
  */

/** @defgroup I2S_Flag_definition I2S Flag definition
  * @{
  */
#define I2S_FLAG_TXE                    SPI_SR_TXE
#define I2S_FLAG_RXNE                   SPI_SR_RXNE

#define I2S_FLAG_UDR                    SPI_SR_UDR
#define I2S_FLAG_OVR                    SPI_SR_OVR
#define I2S_FLAG_FRE                    SPI_SR_FRE

#define I2S_FLAG_CHSIDE                 SPI_SR_CHSIDE
#define I2S_FLAG_BSY                    SPI_SR_BSY
/**
  * @}
  */

/**
  * @}
  */ 
  
/* Exported macro ------------------------------------------------------------*/
/** @defgroup I2S_Exported_macros I2S Exported Macros
  * @{
  */

/** @brief  Reset I2S handle state
  * @param  __HANDLE__: specifies the I2S Handle.
  * @retval None
  */
#define __HAL_I2S_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_I2S_STATE_RESET)

/** @brief  Enable the specified SPI peripheral (in I2S mode).
  * @param  __HANDLE__: specifies the I2S Handle. 
  * @retval None
  */
#define __HAL_I2S_ENABLE(__HANDLE__)    (SET_BIT((__HANDLE__)->Instance->I2SCFGR, SPI_I2SCFGR_I2SE))

/** @brief  Disable the specified SPI peripheral (in I2S mode).
  * @param  __HANDLE__: specifies the I2S Handle. 
  * @retval None
  */
#define __HAL_I2S_DISABLE(__HANDLE__) (CLEAR_BIT((__HANDLE__)->Instance->I2SCFGR, SPI_I2SCFGR_I2SE))

/** @brief  Enable the specified I2S interrupts.
  * @param  __HANDLE__: specifies the I2S Handle.
  * @param  __INTERRUPT__: specifies the interrupt source to enable or disable.
  *         This parameter can be one of the following values:
  *            @arg I2S_IT_TXE: Tx buffer empty interrupt enable
  *            @arg I2S_IT_RXNE: RX buffer not empty interrupt enable
  *            @arg I2S_IT_ERR: Error interrupt enable
  * @retval None
  */  
#define __HAL_I2S_ENABLE_IT(__HANDLE__, __INTERRUPT__)    (SET_BIT((__HANDLE__)->Instance->CR2,(__INTERRUPT__)))

/** @brief  Disable the specified I2S interrupts.
  * @param  __HANDLE__: specifies the I2S Handle.
  * @param  __INTERRUPT__: specifies the interrupt source to enable or disable.
  *         This parameter can be one of the following values:
  *            @arg I2S_IT_TXE: Tx buffer empty interrupt enable
  *            @arg I2S_IT_RXNE: RX buffer not empty interrupt enable
  *            @arg I2S_IT_ERR: Error interrupt enable
  * @retval None
  */ 
#define __HAL_I2S_DISABLE_IT(__HANDLE__, __INTERRUPT__) (CLEAR_BIT((__HANDLE__)->Instance->CR2,(__INTERRUPT__)))
 
/** @brief  Checks if the specified I2S interrupt source is enabled or disabled.
  * @param  __HANDLE__: specifies the I2S Handle.
  *         This parameter can be I2S where x: 1, 2, or 3 to select the I2S peripheral.
  * @param  __INTERRUPT__: specifies the I2S interrupt source to check.
  *          This parameter can be one of the following values:
  *            @arg I2S_IT_TXE: Tx buffer empty interrupt enable
  *            @arg I2S_IT_RXNE: RX buffer not empty interrupt enable
  *            @arg I2S_IT_ERR: Error interrupt enable
  * @retval The new state of __IT__ (TRUE or FALSE).
  */
#define __HAL_I2S_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->CR2 & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)

/** @brief  Checks whether the specified I2S flag is set or not.
  * @param  __HANDLE__: specifies the I2S Handle.
  * @param  __FLAG__: specifies the flag to check.
  *         This parameter can be one of the following values:
  *            @arg I2S_FLAG_RXNE: Receive buffer not empty flag
  *            @arg I2S_FLAG_TXE: Transmit buffer empty flag
  *            @arg I2S_FLAG_UDR: Underrun flag
  *            @arg I2S_FLAG_OVR: Overrun flag
  *            @arg I2S_FLAG_CHSIDE: Channel Side flag
  *            @arg I2S_FLAG_BSY: Busy flag
  * @retval The new state of __FLAG__ (TRUE or FALSE).
  */
#define __HAL_I2S_GET_FLAG(__HANDLE__, __FLAG__) ((((__HANDLE__)->Instance->SR) & (__FLAG__)) == (__FLAG__))

/** @brief Clears the I2S OVR pending flag.
  * @param  __HANDLE__: specifies the I2S Handle.
  * @retval None
  */                                                                                                   
#define __HAL_I2S_CLEAR_OVRFLAG(__HANDLE__) do{__IO uint32_t tmpreg = (__HANDLE__)->Instance->DR;\
                                                             tmpreg = (__HANDLE__)->Instance->SR;\
                                                             UNUSED(tmpreg);\
                                              }while(0)
/** @brief Clears the I2S UDR pending flag.
  * @param  __HANDLE__: specifies the I2S Handle.
  * @retval None
  */
#define __HAL_I2S_CLEAR_UDRFLAG(__HANDLE__)((__HANDLE__)->Instance->SR)
/**
  * @}
  */ 
                                                
/* Exported functions --------------------------------------------------------*/
/** @addtogroup I2S_Exported_Functions
  * @{
  */
                                                
/** @addtogroup I2S_Exported_Functions_Group1
  * @{
  */
/* Initialization/de-initialization functions  ********************************/
HAL_StatusTypeDef HAL_I2S_Init(I2S_HandleTypeDef *hi2s);
HAL_StatusTypeDef HAL_I2S_DeInit (I2S_HandleTypeDef *hi2s);
void HAL_I2S_MspInit(I2S_HandleTypeDef *hi2s);
void HAL_I2S_MspDeInit(I2S_HandleTypeDef *hi2s);
/**
  * @}
  */

/** @addtogroup I2S_Exported_Functions_Group2
  * @{
  */
/* I/O operation functions  ***************************************************/
 /* Blocking mode: Polling */
HAL_StatusTypeDef HAL_I2S_Transmit(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size, uint32_t Timeout);
HAL_StatusTypeDef HAL_I2S_Receive(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size, uint32_t Timeout);

 /* Non-Blocking mode: Interrupt */
HAL_StatusTypeDef HAL_I2S_Transmit_IT(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size);
HAL_StatusTypeDef HAL_I2S_Receive_IT(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size);
void HAL_I2S_IRQHandler(I2S_HandleTypeDef *hi2s);

/* Non-Blocking mode: DMA */
HAL_StatusTypeDef HAL_I2S_Transmit_DMA(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size);
HAL_StatusTypeDef HAL_I2S_Receive_DMA(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size);

HAL_StatusTypeDef HAL_I2S_DMAPause(I2S_HandleTypeDef *hi2s);
HAL_StatusTypeDef HAL_I2S_DMAResume(I2S_HandleTypeDef *hi2s);
HAL_StatusTypeDef HAL_I2S_DMAStop(I2S_HandleTypeDef *hi2s);

/* Callbacks used in non blocking modes (Interrupt and DMA) *******************/
void HAL_I2S_TxHalfCpltCallback(I2S_HandleTypeDef *hi2s);
void HAL_I2S_TxCpltCallback(I2S_HandleTypeDef *hi2s);
void HAL_I2S_RxHalfCpltCallback(I2S_HandleTypeDef *hi2s);
void HAL_I2S_RxCpltCallback(I2S_HandleTypeDef *hi2s);
void HAL_I2S_ErrorCallback(I2S_HandleTypeDef *hi2s);
/**
  * @}
  */

/** @addtogroup I2S_Exported_Functions_Group3
  * @{
  */
/* Peripheral Control and State functions  ************************************/
HAL_I2S_StateTypeDef HAL_I2S_GetState(I2S_HandleTypeDef *hi2s);
uint32_t HAL_I2S_GetError(I2S_HandleTypeDef *hi2s);
/**
  * @}
  */

/**
  * @}
  */

/* Private macros ------------------------------------------------------------*/
/** @defgroup I2S_Private_Macros I2S Private Macros
  * @{
  */
#define IS_I2S_MODE(MODE) (((MODE) == I2S_MODE_SLAVE_TX)  || \
                           ((MODE) == I2S_MODE_SLAVE_RX)  || \
                           ((MODE) == I2S_MODE_MASTER_TX) || \
                           ((MODE) == I2S_MODE_MASTER_RX))

#define IS_I2S_STANDARD(STANDARD) (((STANDARD) == I2S_STANDARD_PHILIPS)   || \
                                   ((STANDARD) == I2S_STANDARD_MSB)       || \
                                   ((STANDARD) == I2S_STANDARD_LSB)       || \
                                   ((STANDARD) == I2S_STANDARD_PCM_SHORT) || \
                                   ((STANDARD) == I2S_STANDARD_PCM_LONG))

#define IS_I2S_DATA_FORMAT(FORMAT) (((FORMAT) == I2S_DATAFORMAT_16B)          || \
                                    ((FORMAT) == I2S_DATAFORMAT_16B_EXTENDED) || \
                                    ((FORMAT) == I2S_DATAFORMAT_24B)          || \
                                    ((FORMAT) == I2S_DATAFORMAT_32B))

#define IS_I2S_MCLK_OUTPUT(OUTPUT) (((OUTPUT) == I2S_MCLKOUTPUT_ENABLE) || \
                                    ((OUTPUT) == I2S_MCLKOUTPUT_DISABLE))

#define IS_I2S_AUDIO_FREQ(FREQ) ((((FREQ) >= I2S_AUDIOFREQ_8K)    && \
                                  ((FREQ) <= I2S_AUDIOFREQ_192K)) || \
                                  ((FREQ) == I2S_AUDIOFREQ_DEFAULT))

#define IS_I2S_CPOL(CPOL) (((CPOL) == I2S_CPOL_LOW) || \
                           ((CPOL) == I2S_CPOL_HIGH))
/**
  * @}
  */

/* Private Fonctions ---------------------------------------------------------*/
/** @defgroup I2S_Private_Functions I2S Private Functions
  * @{
  */
/* Private functions are defined in stm32f1xx_hal_i2s.c file */
/**
  * @}
  */

/**
  * @}
  */

/**
  * @}
  */
#ifdef __cplusplus
}
#endif

#endif /* !STM32L031xx && !STM32L041xx */

#endif /* __STM32L0xx_HAL_I2S_H */

/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/