/* LUFA Library Copyright (C) Dean Camera, 2014. dean [at] fourwalledcubicle [dot] com www.lufa-lib.org */ /* Copyright 2014 Dean Camera (dean [at] fourwalledcubicle [dot] com) Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this permission notice and warranty disclaimer appear in supporting documentation, and that the name of the author not be used in advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaims all warranties with regard to this software, including all implied warranties of merchantability and fitness. In no event shall the author be liable for any special, indirect or consequential damages or any damages whatsoever resulting from loss of use, data or profits, whether in an action of contract, negligence or other tortious action, arising out of or in connection with the use or performance of this software. */ /** \file * * Main source file for the VirtualSerialMassStorage demo. This file contains the main tasks of * the demo and is responsible for the initial application hardware configuration. */ #include "VirtualSerialMassStorage.h" /** LUFA CDC Class driver interface configuration and state information. This structure is * passed to all CDC Class driver functions, so that multiple instances of the same class * within a device can be differentiated from one another. */ USB_ClassInfo_CDC_Device_t VirtualSerial_CDC_Interface = { .Config = { .ControlInterfaceNumber = INTERFACE_ID_CDC_CCI, .DataINEndpoint = { .Address = CDC_TX_EPADDR, .Size = CDC_TXRX_EPSIZE, .Banks = 1, }, .DataOUTEndpoint = { .Address = CDC_RX_EPADDR, .Size = CDC_TXRX_EPSIZE, .Banks = 1, }, .NotificationEndpoint = { .Address = CDC_NOTIFICATION_EPADDR, .Size = CDC_NOTIFICATION_EPSIZE, .Banks = 1, }, }, }; /** LUFA Mass Storage Class driver interface configuration and state information. This structure is * passed to all Mass Storage Class driver functions, so that multiple instances of the same class * within a device can be differentiated from one another. */ USB_ClassInfo_MS_Device_t Disk_MS_Interface = { .Config = { .InterfaceNumber = INTERFACE_ID_MassStorage, .DataINEndpoint = { .Address = MASS_STORAGE_IN_EPADDR, .Size = MASS_STORAGE_IO_EPSIZE, .Banks = 1, }, .DataOUTEndpoint = { .Address = MASS_STORAGE_OUT_EPADDR, .Size = MASS_STORAGE_IO_EPSIZE, .Banks = 1, }, .TotalLUNs = TOTAL_LUNS, }, }; /** Standard file stream for the CDC interface when set up, so that the virtual CDC COM port can be * used like any regular character stream in the C APIs. */ static FILE USBSerialStream; /** Main program entry point. This routine contains the overall program flow, including initial * setup of all components and the main program loop. */ int main(void) { SetupHardware(); /* Create a regular character stream for the interface so that it can be used with the stdio.h functions */ CDC_Device_CreateStream(&VirtualSerial_CDC_Interface, &USBSerialStream); LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY); GlobalInterruptEnable(); for (;;) { CheckJoystickMovement(); /* Must throw away unused bytes from the host, or it will lock up while waiting for the device */ CDC_Device_ReceiveByte(&VirtualSerial_CDC_Interface); CDC_Device_USBTask(&VirtualSerial_CDC_Interface); MS_Device_USBTask(&Disk_MS_Interface); USB_USBTask(); } } /** Configures the board hardware and chip peripherals for the demo's functionality. */ void SetupHardware(void) { #if (ARCH == ARCH_AVR8) /* Disable watchdog if enabled by bootloader/fuses */ MCUSR &= ~(1 << WDRF); wdt_disable(); /* Disable clock division */ clock_prescale_set(clock_div_1); #elif (ARCH == ARCH_XMEGA) /* Start the PLL to multiply the 2MHz RC oscillator to 32MHz and switch the CPU core to run from it */ XMEGACLK_StartPLL(CLOCK_SRC_INT_RC2MHZ, 2000000, F_CPU); XMEGACLK_SetCPUClockSource(CLOCK_SRC_PLL); /* Start the 32MHz internal RC oscillator and start the DFLL to increase it to 48MHz using the USB SOF as a reference */ XMEGACLK_StartInternalOscillator(CLOCK_SRC_INT_RC32MHZ); XMEGACLK_StartDFLL(CLOCK_SRC_INT_RC32MHZ, DFLL_REF_INT_USBSOF, F_USB); PMIC.CTRL = PMIC_LOLVLEN_bm | PMIC_MEDLVLEN_bm | PMIC_HILVLEN_bm; #endif /* Hardware Initialization */ LEDs_Init(); Joystick_Init(); Dataflash_Init(); USB_Init(); /* Check if the Dataflash is working, abort if not */ if (!(DataflashManager_CheckDataflashOperation())) { LEDs_SetAllLEDs(LEDMASK_USB_ERROR); for(;;); } /* Clear Dataflash sector protections, if enabled */ DataflashManager_ResetDataflashProtections(); } /** Checks for changes in the position of the board joystick, sending strings to the host upon each change. */ void CheckJoystickMovement(void) { uint8_t JoyStatus_LCL = Joystick_GetStatus(); char* ReportString = NULL; static bool ActionSent = false; if (JoyStatus_LCL & JOY_UP) ReportString = "Joystick Up\r\n"; else if (JoyStatus_LCL & JOY_DOWN) ReportString = "Joystick Down\r\n"; else if (JoyStatus_LCL & JOY_LEFT) ReportString = "Joystick Left\r\n"; else if (JoyStatus_LCL & JOY_RIGHT) ReportString = "Joystick Right\r\n"; else if (JoyStatus_LCL & JOY_PRESS) ReportString = "Joystick Pressed\r\n"; else ActionSent = false; if ((ReportString != NULL) && (ActionSent == false)) { ActionSent = true; /* Write the string to the virtual COM port via the created character stream */ fputs(ReportString, &USBSerialStream); /* Alternatively, without the stream: */ // CDC_Device_SendString(&VirtualSerial_CDC_Interface, ReportString); } } /** Event handler for the library USB Connection event. */ void EVENT_USB_Device_Connect(void) { LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING); } /** Event handler for the library USB Disconnection event. */ void EVENT_USB_Device_Disconnect(void) { LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY); } /** Event handler for the library USB Configuration Changed event. */ void EVENT_USB_Device_ConfigurationChanged(void) { bool ConfigSuccess = true; ConfigSuccess &= CDC_Device_ConfigureEndpoints(&VirtualSerial_CDC_Interface); ConfigSuccess &= MS_Device_ConfigureEndpoints(&Disk_MS_Interface); LEDs_SetAllLEDs(ConfigSuccess ? LEDMASK_USB_READY : LEDMASK_USB_ERROR); } /** Event handler for the library USB Control Request reception event. */ void EVENT_USB_Device_ControlRequest(void) { CDC_Device_ProcessControlRequest(&VirtualSerial_CDC_Interface); MS_Device_ProcessControlRequest(&Disk_MS_Interface); } /** Mass Storage class driver callback function the reception of SCSI commands from the host, which must be processed. * * \param[in] MSInterfaceInfo Pointer to the Mass Storage class interface configuration structure being referenced */ bool CALLBACK_MS_Device_SCSICommandReceived(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo) { bool CommandSuccess; LEDs_SetAllLEDs(LEDMASK_USB_BUSY); CommandSuccess = SCSI_DecodeSCSICommand(MSInterfaceInfo); LEDs_SetAllLEDs(LEDMASK_USB_READY); return CommandSuccess; }