# Target file name (without extension). PROJECT = kl27z_onekey # Directory common source files exist TMK_DIR = ../../tmk_core # Directory keyboard dependent files exist TARGET_DIR = . # project specific files SRC = $(PROJECT).c CONFIG_H = config.h ## chip/board settings # - the next two should match the directories in # /os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) # - For Teensies, FAMILY = KINETIS and SERIES is either # KL2x (LC) or K20x (3.0,3.1,3.2). MCU_FAMILY = KINETIS MCU_SERIES = KL2x # Linker script to use # - it should exist either in /os/common/ports/ARMCMx/compilers/GCC/ld/ # or /ld/ # - NOTE: a custom ld script is needed for EEPROM on Teensy LC # - LDSCRIPT = # - MKL26Z64 for Teensy LC # - MK20DX128 for Teensy 3.0 # - MK20DX256 for Teensy 3.1 and 3.2 MCU_LDSCRIPT = MKL27Z256 # Startup code to use # - it should exist in /os/common/ports/ARMCMx/compilers/GCC/mk/ # - STARTUP = # - kl2x for Teensy LC # - k20x5 for Teensy 3.0 # - k20x7 for Teensy 3.1 and 3.2 MCU_STARTUP = kl2x # Board: it should exist either in /os/hal/boards/ # or /boards # - BOARD = # - PJRC_TEENSY_LC for Teensy LC # - PJRC_TEENSY_3 for Teensy 3.0 # - PJRC_TEENSY_3_1 for Teensy 3.1 or 3.2 BOARD = ELF # Cortex version # Teensy LC is cortex-m0plus; Teensy 3.x are cortex-m4 MCU = cortex-m0plus # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 # I.e. 6 for Teensy LC; 7 for Teensy 3.x ARMV = 6 # Build Options # comment out to disable the options. # #BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration ## (Note that for BOOTMAGIC on Teensy LC you have to use a custom .ld script.) #MOUSEKEY_ENABLE = yes # Mouse keys #EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug #COMMAND_ENABLE = yes # Commands for debug and configuration #SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend #NKRO_ENABLE = yes # USB Nkey Rollover include $(TMK_DIR)/tool/chibios/common.mk include $(TMK_DIR)/tool/chibios/chibios.mk