#include #include #include #include #include "matrix.h" #include "action.h" #include "backlight.h" #include "suspend_avr.h" #include "suspend.h" #include "timer.h" #ifdef PROTOCOL_LUFA #include "lufa.h" #endif #define wdt_intr_enable(value) \ __asm__ __volatile__ ( \ "in __tmp_reg__,__SREG__" "\n\t" \ "cli" "\n\t" \ "wdr" "\n\t" \ "sts %0,%1" "\n\t" \ "out __SREG__,__tmp_reg__" "\n\t" \ "sts %0,%2" "\n\t" \ : /* no outputs */ \ : "M" (_SFR_MEM_ADDR(_WD_CONTROL_REG)), \ "r" (_BV(_WD_CHANGE_BIT) | _BV(WDE)), \ "r" ((uint8_t) ((value & 0x08 ? _WD_PS3_MASK : 0x00) | \ _BV(WDIE) | (value & 0x07)) ) \ : "r0" \ ) void suspend_idle(uint8_t time) { cli(); set_sleep_mode(SLEEP_MODE_IDLE); sleep_enable(); sei(); sleep_cpu(); sleep_disable(); } /* Power down MCU with watchdog timer * wdto: watchdog timer timeout defined in * WDTO_15MS * WDTO_30MS * WDTO_60MS * WDTO_120MS * WDTO_250MS * WDTO_500MS * WDTO_1S * WDTO_2S * WDTO_4S * WDTO_8S */ static uint8_t wdt_timeout = 0; static void power_down(uint8_t wdto) { #ifdef PROTOCOL_LUFA if (USB_DeviceState == DEVICE_STATE_Configured) return; #endif wdt_timeout = wdto; // Watchdog Interrupt Mode wdt_intr_enable(wdto); // TODO: more power saving // See PicoPower application note // - I/O port input with pullup // - prescale clock // - BOD disable // - Power Reduction Register PRR set_sleep_mode(SLEEP_MODE_PWR_DOWN); sleep_enable(); sei(); sleep_cpu(); sleep_disable(); // Disable watchdog after sleep wdt_disable(); } void suspend_power_down(void) { power_down(WDTO_15MS); } __attribute__ ((weak)) void matrix_power_up(void) {} __attribute__ ((weak)) void matrix_power_down(void) {} bool suspend_wakeup_condition(void) { matrix_power_up(); matrix_scan(); matrix_power_down(); for (uint8_t r = 0; r < MATRIX_ROWS; r++) { if (matrix_get_row(r)) return true; } return false; } // run immediately after wakeup void suspend_wakeup_init(void) { // clear keyboard state clear_keyboard(); #ifdef BACKLIGHT_ENABLE backlight_init(); #endif } #ifndef NO_SUSPEND_POWER_DOWN /* watchdog timeout */ ISR(WDT_vect) { // compensate timer for sleep switch (wdt_timeout) { case WDTO_15MS: timer_count += 15 + 2; // WDTO_15MS + 2(from observation) break; default: ; } } #endif