/* Copyright 2011,2012 Jun WAKO This software is licensed with a Modified BSD License. All of this is supposed to be Free Software, Open Source, DFSG-free, GPL-compatible, and OK to use in both free and proprietary applications. Additions and corrections to this file are welcome. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: * Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. * Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. * Neither the name of the copyright holders nor the names of contributors may be used to endorse or promote products derived from this software without specific prior written permission. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ /* M0110A Support was contributed by skagon@github */ #include #include #include #include #include "m0110.h" #include "debug.h" static inline uint8_t raw2scan(uint8_t raw); static inline uint8_t inquiry(void); static inline uint8_t instant(void); static inline void clock_lo(void); static inline void clock_hi(void); static inline bool clock_in(void); static inline void data_lo(void); static inline void data_hi(void); static inline bool data_in(void); static inline uint16_t wait_clock_lo(uint16_t us); static inline uint16_t wait_clock_hi(uint16_t us); static inline uint16_t wait_data_lo(uint16_t us); static inline uint16_t wait_data_hi(uint16_t us); static inline void idle(void); static inline void request(void); #define WAIT_US(stat, us, err) do { \ if (!wait_##stat(us)) { \ m0110_error = err; \ goto ERROR; \ } \ } while (0) #define WAIT_MS(stat, ms, err) do { \ uint16_t _ms = ms; \ while (_ms) { \ if (wait_##stat(1000)) { \ break; \ } \ _ms--; \ } \ if (_ms == 0) { \ m0110_error = err; \ goto ERROR; \ } \ } while (0) #define KEY(raw) ((raw) & 0x7f) #define IS_BREAK(raw) (((raw) & 0x80) == 0x80) uint8_t m0110_error = 0; void m0110_init(void) { uint8_t data; idle(); _delay_ms(1000); m0110_send(M0110_MODEL); data = m0110_recv(); print("m0110_init model: "); phex(data); print("\n"); m0110_send(M0110_TEST); data = m0110_recv(); print("m0110_init test: "); phex(data); print("\n"); } uint8_t m0110_send(uint8_t data) { m0110_error = 0; request(); WAIT_MS(clock_lo, 250, 1); // keyboard may block long time for (uint8_t bit = 0x80; bit; bit >>= 1) { WAIT_US(clock_lo, 250, 3); if (data&bit) { data_hi(); } else { data_lo(); } WAIT_US(clock_hi, 200, 4); } _delay_us(100); // hold last bit for 80us idle(); return 1; ERROR: print("m0110_send err: "); phex(m0110_error); print("\n"); _delay_ms(500); idle(); return 0; } uint8_t m0110_recv(void) { uint8_t data = 0; m0110_error = 0; WAIT_MS(clock_lo, 250, 1); // keyboard may block long time for (uint8_t i = 0; i < 8; i++) { data <<= 1; WAIT_US(clock_lo, 200, 2); WAIT_US(clock_hi, 200, 3); if (data_in()) { data |= 1; } } idle(); return data; ERROR: print("m0110_recv err: "); phex(m0110_error); print("\n"); _delay_ms(500); idle(); return 0xFF; } /* Handling for exceptional case of key combinations for M0110A Shift and Calc/Arrow key could be operated simultaneously: Case Shift Arrow Events Interpret ------------------------------------------------------------------- 1 Down Down 71, 79, DD Calc(d)*a *b 2 Down Up 71, 79, UU Arrow&Calc(u)*a 3 Up Down F1, 79, DD Shift(u) *c 4 Up Up F1, 79, UU Shift(u) and Arrow&Calc(u)*a Case Shift Calc Events Interpret ------------------------------------------------------------------- 5(1) Down Down 71, 71, 79, DD Shift(d) and Cacl(d) 6(2) Down Up F1, 71, 79, UU Shift(u) and Arrow&Calc(u)*a 7(1) Up Down F1, 71, 79, DD Shift(u) and Calc(d) 8(4) Up Up F1, F1, 79, UU Shift(ux2) and Arrow&Calc(u)*a During Calc key is hold: Case Shift Arrow Events Interpret ------------------------------------------------------------------- A(3) ---- Down F1, 79, DD Shift(u) *c B ---- Up 79, UU Arrow&Calc(u)*a C Down ---- F1, 71 Shift(u) and Shift(d) D Up ---- F1 Shift(u) E Hold Down 79, DD Normal F Hold Up 79, UU Arrow&Calc(u)*a G(1) Down Down F1, 71, 79, DD Shift(u)*b and Calc(d)*a H(2) Down Up F1, 71, 79, UU Shift(u) and Arrow&Calc(u)*a I(3) Up Down F1, F1, 79, DD Shift(ux2) *c J(4) Up Up F1, 79, UU Shift(u) and Arrow&Calc(u)*a Case Shift Calc Events Interpret ------------------------------------------------------------------- K(1) ---- Down 71, 79, DD Calc(d)*a L(4) ---- Up F1, 79, UU Shift(u) and Arrow&Calc(u)*a M(1) Hold Down 71, 79, DD Calc(d)*a N Hold Up 79, UU Arrow&Calc(u)*a Where DD/UU indicates part of Keypad Down/Up event. *a: Impossible to distinguish btween Arrow and Calc event. *b: Shift(d) event is ignored. *c: Arrow/Calc(d) event is ignored. */ uint8_t m0110_recv_key(void) { static uint8_t keybuf = 0x00; static uint8_t keybuf2 = 0x00; static uint8_t rawbuf = 0x00; uint8_t raw, raw2, raw3; if (keybuf) { raw = keybuf; keybuf = 0x00; return raw; } if (keybuf2) { raw = keybuf2; keybuf2 = 0x00; return raw; } if (rawbuf) { raw = rawbuf; rawbuf = 0x00; } else { raw = instant(); // Use INSTANT for better response. Should be INQUIRY ? } switch (KEY(raw)) { case M0110_KEYPAD: raw2 = instant(); switch (KEY(raw2)) { case M0110_ARROW_UP: case M0110_ARROW_DOWN: case M0110_ARROW_LEFT: case M0110_ARROW_RIGHT: if (IS_BREAK(raw2)) { // Case B,F,N: keybuf = (raw2scan(raw2) | M0110_CALC_OFFSET); // Calc(u) return (raw2scan(raw2) | M0110_KEYPAD_OFFSET); // Arrow(u) } break; } // Keypad or Arrow return (raw2scan(raw2) | M0110_KEYPAD_OFFSET); break; case M0110_SHIFT: raw2 = instant(); switch (KEY(raw2)) { case M0110_SHIFT: // Case: 5-8,C,G,H rawbuf = raw2; return raw2scan(raw); // Shift(d/u) break; case M0110_KEYPAD: // Shift + Arrow, Calc, or etc. raw3 = instant(); switch (KEY(raw3)) { case M0110_ARROW_UP: case M0110_ARROW_DOWN: case M0110_ARROW_LEFT: case M0110_ARROW_RIGHT: if (IS_BREAK(raw)) { if (IS_BREAK(raw3)) { // Case 4: print("(4)\n"); keybuf2 = raw2scan(raw); // Shift(u) keybuf = (raw2scan(raw3) | M0110_CALC_OFFSET); // Calc(u) return (raw2scan(raw3) | M0110_KEYPAD_OFFSET); // Arrow(u) } else { // Case 3: print("(3)\n"); return (raw2scan(raw)); // Shift(u) } } else { if (IS_BREAK(raw3)) { // Case 2: print("(2)\n"); keybuf = (raw2scan(raw3) | M0110_CALC_OFFSET); // Calc(u) return (raw2scan(raw3) | M0110_KEYPAD_OFFSET); // Arrow(u) } else { // Case 1: print("(1)\n"); return (raw2scan(raw3) | M0110_CALC_OFFSET); // Calc(d) } } break; default: // Shift + Keypad keybuf = (raw2scan(raw3) | M0110_KEYPAD_OFFSET); return raw2scan(raw); // Shift(d/u) break; } break; default: // Shift + Normal keys keybuf = raw2scan(raw2); return raw2scan(raw); // Shift(d/u) break; } break; default: // Normal keys return raw2scan(raw); break; } } static inline uint8_t raw2scan(uint8_t raw) { return (raw == M0110_NULL) ? M0110_NULL : ( (raw == M0110_ERROR) ? M0110_ERROR : ( ((raw&0x80) | ((raw&0x7F)>>1)) ) ); } static inline uint8_t inquiry(void) { m0110_send(M0110_INQUIRY); return m0110_recv(); } static inline uint8_t instant(void) { m0110_send(M0110_INSTANT); uint8_t data = m0110_recv(); if (data != M0110_NULL) { debug_hex(data); debug(" "); } return data; } static inline void clock_lo() { M0110_CLOCK_PORT &= ~(1<HOST: HOST reads bit on rising edge. CLOCK ~~~~~~~~~~~~|__|~~~|__|~~~|__|~~~|__|~~~|__|~~~|__|~~~|__|~~~|__|~~~~~~~~~~~ DATA ~~~~~~~~~~~~X777777X666666X555555X444444X333333X222222X111111X000000X~~~~~~~ <--> 160us(clock low) <---> 180us(clock high) 3) HOST->KEYBOARD: HOST asserts bit on falling edge. CLOCK ~~~~~~~~~~~~|__|~~~|__|~~~|__|~~~|__|~~~|__|~~~|__|~~~|__|~~~|__|~~~~~~~~~~~ DATA ~~~~~~|_____X777777X666666X555555X444444X333333X222222X111111X000000X~~~~~~~ <----> 840us(request to send by host) <---> 80us(hold DATA) <--> 180us(clock low) <---> 220us(clock high) Protocol -------- COMMAND: Inquiry 0x10 get key event with block Instant 0x12 get key event Model 0x14 get model number(M0110 responds with 0x09) bit 7 1 if another device connected(used when keypad exists?) bit4-6 next device model number bit1-3 keyboard model number bit 0 always 1 Test 0x16 test(ACK:0x7D/NAK:0x77) KEY EVENT: bit 7 key state(0:press 1:release) bit 6-1 scan code(see below) bit 0 always 1 To get scan code use this: ((bits&(1<<7)) | ((bits&0x7F))>>1). Note: On the M0110A, Keypad keys and Arrow keys are preceded by 0x79. Moreover, some Keypad keys(=, /, * and +) are preceded by 0x71 on press and 0xF1 on release. ARROW KEYS: Arrow keys and Calc keys(+,*,/,= on keypad) share same byte sequence and preceding byte of Calc keys(0x71 and 0xF1) means press and release event of SHIFT. This causes a very confusing situation, it is difficult or impossible to tell Calc key from Arrow key plus SHIFT in some cases. Raw key events: press release ---------------- ---------------- Left: 0x79, 0x0D 0x79, 0x8D Right: 0x79, 0x05 0x79, 0x85 Up: 0x79, 0x1B 0x79, 0x9B Down: 0x79, 0x11 0x79, 0x91 Pad+: 0x71, 0x79, 0x0D 0xF1, 0x79, 0x8D Pad*: 0x71, 0x79, 0x05 0xF1, 0x79, 0x85 Pad/: 0x71, 0x79, 0x1B 0xF1, 0x79, 0x9B Pad=: 0x71, 0x79, 0x11 0xF1, 0x79, 0x91 RAW CODE: M0110A ,---------------------------------------------------------. ,---------------. | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Bcksp| |Clr| =| /| *| |---------------------------------------------------------| |---------------| |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| | | 7| 8| 9| -| |-----------------------------------------------------' | |---------------| |CapsLo| A| S| D| F| G| H| J| K| L| ;| '|Return| | 4| 5| 6| +| |---------------------------------------------------------| |---------------| |Shift | Z| X| C| V| B| N| M| ,| ,| /|Shft|Up | | 1| 2| 3| | |---------------------------------------------------------' |-----------|Ent| |Optio|Mac | Space | \|Lft|Rgt|Dn | | 0| .| | `---------------------------------------------------------' `---------------' ,---------------------------------------------------------. ,---------------. | 65| 25| 27| 29| 2B| 2F| 2D| 35| 39| 33| 3B| 37| 31| 67| |+0F|*11|*1B|*05| |---------------------------------------------------------| |---------------| | 61| 19| 1B| 1D| 1F| 23| 21| 41| 45| 3F| 47| 43| 3D| | |+33|+37|+39|+1D| |-----------------------------------------------------' | |---------------| | 73| 01| 03| 05| 07| 0B| 09| 4D| 51| 4B| 53| 4F| 49| |+2D|+2F|+31|*0D| |---------------------------------------------------------| |---------------| | 71| 0D| 0F| 11| 13| 17| 5B| 5D| 27| 5F| 59| 71|+1B| |+27|+29|+2B| | |---------------------------------------------------------' |-----------|+19| | 75| 6F| 63 | 55|+0D|+05|+11| | +25|+03| | `---------------------------------------------------------' `---------------' + 0x79, 0xDD / 0xF1, 0xUU * 0x71, 0x79,DD / 0xF1, 0x79, 0xUU MODEL NUMBER: M0110: 0x09 00001001 : model number 4 (100) M0110A: 0x0B 00001011 : model number 5 (101) M0110 & M0120: ??? Scan Code --------- m0110_recv_key() function returns following scan codes instead of raw key events. Scan codes are 1 byte long and MSB(bit7) is set when key is released. M0110 ,---------------------------------------------------------. | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backs| |---------------------------------------------------------| |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \| |---------------------------------------------------------| |CapsLo| A| S| D| F| G| H| J| K| L| ;| '|Return| |---------------------------------------------------------| |Shift | Z| X| C| V| B| N| M| ,| ,| /| | `---------------------------------------------------------' |Opt|Mac | Space |Enter|Opt| `------------------------------------------------' ,---------------------------------------------------------. | 32| 12| 13| 14| 15| 17| 16| 1A| 1C| 19| 1D| 1B| 18| 33| |---------------------------------------------------------| | 30| 0C| 0D| 0E| 0F| 10| 11| 20| 22| 1F| 23| 21| 1E| 2A| |---------------------------------------------------------| | 39| 00| 01| 02| 03| 05| 04| 26| 28| 25| 29| 27| 24| |---------------------------------------------------------| | 38| 06| 07| 08| 09| 0B| 2D| 2E| 2B| 2F| 2C| 38| `---------------------------------------------------------' | 3A| 37| 31 | 34| 3A| `------------------------------------------------' M0110A ,---------------------------------------------------------. ,---------------. | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Bcksp| |Clr| =| /| *| |---------------------------------------------------------| |---------------| |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| | | 7| 8| 9| -| |-----------------------------------------------------' | |---------------| |CapsLo| A| S| D| F| G| H| J| K| L| ;| '|Return| | 4| 5| 6| +| |---------------------------------------------------------| |---------------| |Shift | Z| X| C| V| B| N| M| ,| ,| /|Shft|Up | | 1| 2| 3| | |---------------------------------------------------------' |-----------|Ent| |Optio|Mac | Space | \|Lft|Rgt|Dn | | 0| .| | `---------------------------------------------------------' `---------------' ,---------------------------------------------------------. ,---------------. | 32| 12| 13| 14| 15| 17| 16| 1A| 1C| 19| 1D| 1B| 18| 33| | 47| 68| 6D| 62| |---------------------------------------------------------| |---------------| | 30| 0C| 0D| 0E| 0F| 10| 11| 20| 22| 1F| 23| 21| 1E| | | 59| 5B| 5C| 4E| |-----------------------------------------------------' | |---------------| | 39| 00| 01| 02| 03| 05| 04| 26| 28| 25| 29| 27| 24| | 56| 57| 58| 66| |---------------------------------------------------------| |---------------| | 38| 06| 07| 08| 09| 0B| 2D| 2E| 2B| 2F| 2C| 38| 4D| | 53| 54| 55| | |---------------------------------------------------------' |-----------| 4C| | 3A| 37| 31 | 2A| 46| 42| 48| | 52| 41| | `---------------------------------------------------------' `---------------' References ---------- Technical Info for 128K/512K and Plus ftp://ftp.apple.asimov.net/pub/apple_II/documentation/macintosh/Mac%20Hardware%20Info%20-%20Mac%20128K.pdf ftp://ftp.apple.asimov.net/pub/apple_II/documentation/macintosh/Mac%20Hardware%20Info%20-%20Mac%20Plus.pdf Protocol: Page 20 of Tech Info for 128K/512K http://www.mac.linux-m68k.org/devel/plushw.php Connector: Page 20 of Tech Info for 128K/512K http://www.kbdbabel.org/conn/kbd_connector_macplus.png Signaling: http://www.kbdbabel.org/signaling/kbd_signaling_mac.png http://typematic.blog.shinobi.jp/Entry/14/ Scan Codes: Page 22 of Tech Info for 128K/512K Page 07 of Tech Info for Plus http://m0115.web.fc2.com/m0110.jpg http://m0115.web.fc2.com/m0110a.jpg */