Terminology =========== PSM HIDP HID Protocol L2CAP Logical Link Control Adaptation Protocol MTU Maximum Transmission Unit HID Protocol Messages ===================== 3 of HID_SPEC_V11.pdf Control channel PSM=0x0011 Interrupt channel PSM=0x0013 HANDSHAKE(0) HID_CONTROL(1) GET_REPORT(4) ------------- Host requests report(DATA payload on Control channel) from Device Size Desc ------------------------------------------------------------------------------ HIDP-Hdr 1 7..4: HIDP Message TYpe(4: GET_REPORT) 3: Size(1:2-octed buffer size, 0:size of the report) 2: 0 1..0: Report Type(1:input, 2:output, 3: feature) ReportID 1 Optional BufferSize 2 Optional(specified when Size=1) SET_REPORT(5) GET_PROTOCOL(6) SET_PROTOCOL(7) DATA(A) ------- Input/Output Report: All DATA payloads flow on Interrupt channel. Other: flows on Control channel. Size Desc ------------------------------------------------------------------------------ HIDP-Hdr 1 7..4 0xA 3..2 Reserved(0) 1..0 Report Type(0:Other, 1:Input, 2:Output, 3:Feature) Payload N Data Boot Protocol ============= 3.3.2 No report descriptor, fixed report descriptors defined. Device ReportID Size --------------------------------- Reserved 0 Keyboard 1 9octets Mouse 2 4octets Reserved 3-255 Report descriptor ----------------- Report ID is added to USB HID boot protocol descriptor. Boot Protocol device doesn't need to supply descriptors. and can send extra data on end of boot report this data will be ignored unless host supports report descriptor. Report Protocol devices can have specific descriptors. Using Boot protocol descriptor followed by extra data may be useful for compatibility to Boot protocol only supported host. NOTE: Bluegiga HID sample say report ID of mouse is 1 but 2? Bluegiga HID sample say report ID of consumer page is 2 but 3? ** mouse.desc and consumer.desc were fixed. size keyboard.desc 67 0x43 mouse.desc 60 0x3c consumer.desc 82 0x52 combo.desc 209 0xd1 SDP === attributes(3.3.2) ---------- HIDDeviceSubclass which type is supported in Boot Protocol Mode 7 6 --- 0 1 Keyboard 1 0 Pointing device 1 1 Combo keyboard/pointing device HIDBootDevice TRUE HIDReconnectInitiate TRUE Class of Device/Service ======================= http://phys.sci.hokudai.ac.jp/LABS/yts/pic/GB002/Bluetooth_assigned_numbers_baseband.pdf 0x0005C0 Keyboard and Pointing deivce(combo) 23 16 15 8 7 0 --------------------------------- Service |Major |Minor |Format Format type 1 0 --- 0 0 Minor Device Class of Peripheral Major 7 6 --- 0 1 Keyboard 1 0 Pointing device 1 1 Combo keyboard/pointing device Major device classes 12 11 10 9 8 -------------- 0 0 0 0 0 Miscellaneous 0 0 0 0 1 Computer 0 0 0 1 0 Phone 0 0 0 1 1 LAN /Network Access point 0 0 1 0 0 Audio/Video (headset,speaker,stereo, video display, vcr..... 0 0 1 0 1 *Peripheral (mouse, joystick, keyboards, ..... ) 0 0 1 1 0 Imaging (printing, scanner, camera, display, ...) 1 1 1 1 1 Uncategorized, specific device code not specified X X X X X All other values reserved Major service classes bit -------------------------------------- 13 Limited Discoverable Mode [Ref #1] 14 (reserved) 15 (reserved) 16 Positioning (Location identification) 17 Networking (LAN, Ad hoc, ...) 18 Rendering (Printing, Speaker, ...) 19 Capturing (Scanner, Microphone, ...) 20 Object Transfer (v-Inbox, v-Folder, ...) 21 Audio (Speaker, Microphone, Headset service, ...) 22 Telephony (Cordless telephony, Modem, Headset service, ...) 23 Information (WEB-server, WAP-server, ...) SET PROFILE HID 0d c0 100 0 en 0409 HHKB pro Bluetooth keyboard {function bit} uint8 {subclass} uint8 {version} uint16 {country} uint8 {BTlang} char[2] {USBlang} uint16 {name} string SET PROFILE HID 0f c0 100 0 en 0409 TMK Bluetooth keyboard // composite device: keyboard and mouse SET BT CLASS 005c0 Authentication SSP ------------------- SET BT SSP 2 0 PASS KEY entering SET BT SSP 3 0 NO PASS KEY entering SET BT SSP : 0:display only 1:display+yes/no button 2:keyboard only 3:none SET BT SSP 2 1 # 2:keyboard only 1:Man-in-the-middle protection is needed SET BT SSP 2 0 # 2:keyboard only 0:Man-in-the-middle protection is not needed SET BT SSP 2 1 bond only if MITM protection is supported by host SET BT SSP 2 0 bond even if MITM protection is not supported by host On Windows 'Add device' causes SSP PASSKEY event on iWRAP SSP PASSKEY 78:dd:08:b7:e4:a2 ? If device has display(0 or 1) this event occurs. User should be shown this code on the device. SSP CONFIRM 78:dd:08:b7:e4:a2 517572 SET BT SSP 3 0 No input/output, No MITM protection. Without procedure of authentication the divice is bond to host. Connect ======= CALL 78:dd:08:b7:e4:a2 11 HID Setting ======== SET BT PAIR * SET RESET SET BT CLASS 0005c0 SET BT AUTH * 0000 SET BT SSP 2 0 SET CONTROL CONFIG 800 SET PROFILE HID 0f c0 0100 00 en 0409 Bluetooth keyboard SET PROFILE SPP SET CONTROL INIT SET CONTROL MUX 0 SET BT NAME TMK Blootooth WT12 SET PROFILE HID 0f c0 0100 00 en 0409 TMK Bluetooth keyboard(WT12) SDP ADD 1124 HID SET BT PAIRCOUNT 4 SET BT POWER 3 3 3 SET BT SNIFF 100 20 1 8 RESET SET CONTROL BAUD 38400,8n1 # combo keyboard + mouse HID SET 7f 05010906a1010507850119e029e715002501750195088102950175088101950575010508850119012905910295017503910395067508150025650507190029658100c005010902a1010901a1008502050919012903150025019503750181020501093815f1250f9501750581060501093009311581257f750895028106c0c0 HID SET d1 05010906a1010507850119e029e715002501750195088102950175088101950575010508850119012905910295017503910395067508150025650507190029658100c005010902a1010901a1008502050919012903150025019503750181020501093815f1250f9501750581060501093009311581257f750895028106c0c0050c0901a1018503050c1500250109e909ea09e209cd19b529b87501950881020a8a010a21020a2a021a23022a27027501950881020a83010a96010a92010a9e010a94010a060209b209b4750195088102c0 --------------------- SET BT BDADDR 00:07:80:47:22:14 SET BT NAME TMK BT WT12 SET BT CLASS 0005c0 SET BT AUTH * 0000 SET BT IDENT BT:47 f000 5.0.1 Bluegiga iWRAP SET BT LAP 9e8b33 SET BT PAGEMODE 4 2000 1 SET BT PAIRCOUNT 4 SET BT PAIR 78:dd:08:b7:e4:a2 fe2fd79e86c6bbfa9351a032bceb2648 SET BT POWER 3 3 3 SET BT ROLE 1 f 12c0 SET BT SNIFF 100 20 1 8 SET BT SSP 3 0 SET BT MTU 672 SET CONTROL BAUD 38400,8n1 SET CONTROL CD 00 0 SET CONTROL ECHO 7 SET CONTROL ESCAPE - 20 1 SET CONTROL GAIN 0 5 SET CONTROL INIT SET CONTROL MUX 0 SET CONTROL MSC DTE 00 00 00 00 00 00 SET CONTROL PIO 00 00 SET CONTROL READY 00 SET PROFILE HID 0f c0 0100 00 en 0409 TMK Bluetooth keyboard SET SET control config list SET CONTROL CONFIG 0000 0000 0000 410e CLOCK_CACHE INTERLACED_INQ INTERLACED_PAGE KLUDGE UART_LATENCY WRAP THOR AI (5.0.1 build 620) Copyright (c) 2003-2012 Bluegiga Technologies Inc. Compiled on Oct 1 2012 10:56:21, running on WT12-A module, psr v31 BGIO FTP HFP HFP_AG HID HID_CONSUMER_PAGE HSP MAP MDP OTA PBAP PIO=0x00fc SSP SUBRATE TEST VOLUME - BOCK4 version 620 (Oct 1 2012 10:56:03) (max acl/sco 7/1) - Bluetooth version 3.0, Power class 2 - Loader 8615, firmware 8825 (56-bit encryption), native execution mode - up 0 days, 00:13, 0 connections (pool 1) - User configuration: &028b = 0000 1388 &028c = 0001 0020 0100 0001 0008 0000 &028d = 0000 &0295 = 0000 0005 000b 0000 0003 0000 0000 0000 0000 0000 0000 &0298 = c006 &0299 = 0000 0000 &02a3 = 0030 0030 0030 0030 &02a4 = 009d 0000 &02a5 = 0053 0045 0054 0020 0043 004f 004e 0054 0052 004f 004c 0020 004d 0055 0058 0020 0030 &02a7 = 0000 05c0 &02a8 = 400e 0000 0000 &02aa = 0004 2000 0001 0033 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 &02ab = 0001 000f 12c0 &02ac = 0000 0020 002b 0000 0000 0000 0000 0000 0000 0000 000a 0000 0000 0000 0004 0000 0000 0000 0000 02a0 0000 0000 0000 0000 &02ad = 4d54 204b 5442 5720 3154 0032 &02b0 = fa65 b0aa 934a 077b a600 d1cc fe58 8dd5 &02b3 = 0004 0004 0004 0000 0003 0003 0003 0003 0003 0003 0003 0003 0003 0003 0003 0003 000d 0007 0005 8afb 0005 0000 1c13 0000 0c3d 0005 b435 0006 b450 0006 0000 1416 000d &02b7 = 000f 00c0 0100 0000 0065 006e 0409 4d54 204b 6c42 6575 6f74 746f 2068 656b 6279 616f 6472 0000 --------------------- ---------- after SET RESET ---------- WRAP THOR AI (5.0.1 build 620) Copyright (c) 2003-2012 Bluegiga Technologies Inc. READY. set SET BT BDADDR 00:07:80:47:22:14 SET BT NAME WT12 SET BT CLASS 001f00 SET BT IDENT BT:47 f000 5.0.1 Bluegiga iWRAP SET BT LAP 9e8b33 SET BT PAGEMODE 4 2000 1 SET BT POWER 3 3 3 SET BT ROLE 0 f 7d00 SET BT SNIFF 0 20 1 8 SET BT SSP 3 0 SET BT MTU 667 SET CONTROL BAUD 115200,8n1 SET CONTROL CD 00 0 SET CONTROL ECHO 7 SET CONTROL ESCAPE 43 00 1 SET CONTROL GAIN 0 5 SET CONTROL MSC DTE 00 00 00 00 00 00 SET CONTROL PIO 00 00 SET CONTROL READY 00 SET PROFILE SPP Bluetooth Serial Port SET SET CONTROL CONFIG 0000 0000 0000 0100 KLUDGE info config WRAP THOR AI (5.0.1 build 620) Copyright (c) 2003-2012 Bluegiga Technologies Inc. Compiled on Oct 1 2012 10:56:21, running on WT12-A module, psr v31 BGIO FTP HFP HFP_AG HID HID_CONSUMER_PAGE HSP MAP MDP OTA PBAP PIO=0x00fc SSP SUBRATE TEST VOLUME - BOCK4 version 620 (Oct 1 2012 10:56:03) (max acl/sco 7/1) - Bluetooth version 3.0, Power class 2 - Loader 8615, firmware 8825 (56-bit encryption), native execution mode - up 0 days, 00:00, 0 connections (pool 1) - User configuration: &0295 = 0000 0005 000b 0000 0003 0000 0000 0000 0000 0000 0000 &0299 = 0000 0000 &02aa = 0004 2000 0001 0033 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 &02ac = 0000 0000 002b 0000 0000 0000 0000 0000 0000 0000 0002 0000 0000 0000 0010 0000 0000 0000 0000 029b 0000 0000 0000 0000 &02ad = 5457 3231 &02b0 = fa65 b0aa 934a 077b a600 d1cc fe58 8dd5 READY. ----------