/** \file * * This file contains special DoxyGen information for the generation of the main page and other special * documentation pages. It is not a project source file. */ /** \page Page_GettingStarted Getting Started * * Out of the box, LUFA contains a large number of pre-made class demos for you to test, experiment with and * ultimately build upon for your own projects. All the demos (where possible) come pre-configured to build and * run correctly on the AT90USB1287 AVR microcontroller, mounted on the Atmel USBKEY board and running at an 8MHz * master clock. This is due to two reasons; one, it is the hardware the author possesses, and two, it is the most * popular Atmel USB demonstration board to date. To learn how to reconfigure, recompile and program the included * LUFA applications using different settings, see the subsections below. * * Most of the included demos in the /Demos/ folder come in both ClassDriver and LowLevel varieties. If you are new * to LUFA, it is highly recommended that you look at the ClassDriver versions first, which use the pre-made USB * Class Drivers (\ref Group_USBClassDrivers) to simplify the use of the standard USB classes in user applications. * * Subsections: * \li \subpage Page_ConfiguringApps - How to Configure the Included Demos, Projects and Bootloaders * \li \subpage Page_CompilingApps - How to Compile the Included Demos, Projects and Bootloaders * \li \subpage Page_ProgrammingApps - How to Program an AVR with the Included Demos, Projects and Bootloaders */