/** \file * * This file contains special DoxyGen information for the generation of the main page and other special * documentation pages. It is not a project source file. */ /** \mainpage Keyboard Device Demo * * \section Sec_Compat Demo Compatibility: * * The following list indicates what microcontrollers are compatible with this demo. * * \li Series 7 USB AVRs (AT90USBxxx7) * \li Series 6 USB AVRs (AT90USBxxx6) * \li Series 4 USB AVRs (ATMEGAxxU4) * \li Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2) * \li Series AU XMEGA AVRs (ATXMEGAxxxAxU) * \li Series B XMEGA AVRs (ATXMEGAxxxBxU) * \li Series C XMEGA AVRs (ATXMEGAxxxCxU) * * \section Sec_Info USB Information: * * The following table gives a rundown of the USB utilization of this demo. * * * * * * * * * * * * * * * * * * * * * * *
USB Mode:Device
USB Class:Human Interface Device (HID)
USB Subclass:Keyboard Subclass
Relevant Standards:USBIF HID Specification \n * USBIF HID Usage Tables
Supported USB Speeds:Low Speed Mode \n * Full Speed Mode
* * \section Sec_Description Project Description: * * Keyboard demonstration application. This gives a simple reference application * for implementing a USB Keyboard using the basic USB HID drivers in all modern * OSes (i.e. no special drivers required). It is boot protocol compatible, and thus * works under compatible BIOS as if it was a native keyboard (e.g. PS/2). * * On start-up the system will automatically enumerate and function as a keyboard * when the USB connection to a host is present. To use the keyboard example, * manipulate the joystick to send the letters a, b, c, d and e. See the USB HID * documentation for more information on sending keyboard event and key presses. Unlike * other LUFA Keyboard demos, this example shows explicitly how to send multiple key presses * inside the same report to the host. * * \section Sec_Options Project Options * * The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value. * * * * * *
* None *
*/