/* LUFA Library Copyright (C) Dean Camera, 2014. dean [at] fourwalledcubicle [dot] com www.lufa-lib.org */ /* Copyright 2014 Dean Camera (dean [at] fourwalledcubicle [dot] com) Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this permission notice and warranty disclaimer appear in supporting documentation, and that the name of the author not be used in advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaims all warranties with regard to this software, including all implied warranties of merchantability and fitness. In no event shall the author be liable for any special, indirect or consequential damages or any damages whatsoever resulting from loss of use, data or profits, whether in an action of contract, negligence or other tortious action, arising out of or in connection with the use or performance of this software. */ /** \file * * Mass Storage Device commands, to issue MSD commands to the device for * reading device status, capacity, and other characteristics. This file * also contains block read and write functions, so that device blocks * can be read and written. In general, these functions would be chained * to a FAT library to give file-level access to an attached device's contents. * * \note Many Mass Storage devices on the market are non-compliant to the * specifications and thus can prove difficult to interface with. It * may be necessary to retry the functions in the module several times * after they have returned and error to successfully send the command * to the device. Some devices may also need to have the stream function * timeout period extended beyond 100ms (some badly designed devices exceeding * 1.5 seconds occasionally) by defining USB_STREAM_TIMEOUT_MS to a * larger value in the project makefile and passing it to the compiler * via the -D switch. */ #define INCLUDE_FROM_MASSSTORE_COMMANDS_C #include "MassStoreCommands.h" /** Current Tag value used in issued CBWs to the device. This is automatically incremented * each time a command is sent, and is not externally accessible. */ static uint32_t MassStore_Tag = 1; /** Routine to send the current CBW to the device, and increment the Tag value as needed. * * \param[in] SCSICommandBlock Pointer to a SCSI command block structure to send to the attached device * \param[in,out] BufferPtr Pointer to a buffer for the data to send or receive to/from the device, or NULL if no data * * \return A value from the Pipe_Stream_RW_ErrorCodes_t enum */ static uint8_t MassStore_SendCommand(MS_CommandBlockWrapper_t* const SCSICommandBlock, void* BufferPtr) { uint8_t ErrorCode = PIPE_RWSTREAM_NoError; /* Wrap Tag value when invalid - MS class defines tag values of 0 and 0xFFFFFFFF to be invalid */ if (++MassStore_Tag == 0xFFFFFFFF) MassStore_Tag = 1; /* Each transmission should have a unique tag value, increment before use */ SCSICommandBlock->Tag = MassStore_Tag; /* Select the OUT data pipe for CBW transmission */ Pipe_SelectPipe(MASS_STORE_DATA_OUT_PIPE); Pipe_Unfreeze(); /* Write the CBW command to the OUT pipe */ if ((ErrorCode = Pipe_Write_Stream_LE(SCSICommandBlock, sizeof(MS_CommandBlockWrapper_t), NULL)) != PIPE_RWSTREAM_NoError) { Pipe_Freeze(); return ErrorCode; } /* Send the data in the OUT pipe to the attached device */ Pipe_ClearOUT(); /* Wait until command has been sent */ Pipe_WaitUntilReady(); /* Freeze pipe after use */ Pipe_Freeze(); if (BufferPtr != NULL) { /* Transfer the requested data (if any) to or from the device */ ErrorCode = MassStore_SendReceiveData(SCSICommandBlock, (void*)BufferPtr); /* Only fail completely if the transfer fails without a STALL, as a logical STALL can be recovered from */ if ((ErrorCode != PIPE_RWSTREAM_NoError) && (ErrorCode != PIPE_RWSTREAM_PipeStalled)) { Pipe_Freeze(); return ErrorCode; } } /* Retrieve the returned SCSI status from the device */ MS_CommandStatusWrapper_t SCSIStatusBlock; return MassStore_GetReturnedStatus(&SCSIStatusBlock); } /** Waits until the attached device is ready to accept data following a CBW, checking * to ensure that the device has not stalled the transaction. * * \return A value from the Pipe_Stream_RW_ErrorCodes_t enum */ static uint8_t MassStore_WaitForDataReceived(void) { uint16_t TimeoutMSRem = COMMAND_DATA_TIMEOUT_MS; uint16_t PreviousFrameNumber = USB_Host_GetFrameNumber(); /* Select the IN data pipe for data reception */ Pipe_SelectPipe(MASS_STORE_DATA_IN_PIPE); Pipe_Unfreeze(); /* Wait until data received in the IN pipe */ while (!(Pipe_IsINReceived())) { uint16_t CurrentFrameNumber = USB_Host_GetFrameNumber(); /* Check to see if a new frame has been issued (1ms elapsed) */ if (CurrentFrameNumber != PreviousFrameNumber) { /* Save the new frame number and decrement the timeout period */ PreviousFrameNumber = CurrentFrameNumber; TimeoutMSRem--; /* Check to see if the timeout period for the command has elapsed */ if (!(TimeoutMSRem)) return PIPE_RWSTREAM_Timeout; } Pipe_Freeze(); Pipe_SelectPipe(MASS_STORE_DATA_OUT_PIPE); Pipe_Unfreeze(); /* Check if pipe stalled (command failed by device) */ if (Pipe_IsStalled()) { /* Clear the stall condition on the OUT pipe */ USB_Host_ClearEndpointStall(Pipe_GetBoundEndpointAddress()); return PIPE_RWSTREAM_PipeStalled; } Pipe_Freeze(); Pipe_SelectPipe(MASS_STORE_DATA_IN_PIPE); Pipe_Unfreeze(); /* Check if pipe stalled (command failed by device) */ if (Pipe_IsStalled()) { /* Clear the stall condition on the IN pipe */ USB_Host_ClearEndpointStall(Pipe_GetBoundEndpointAddress()); return PIPE_RWSTREAM_PipeStalled; } /* Check to see if the device was disconnected, if so exit function */ if (USB_HostState == HOST_STATE_Unattached) return PIPE_RWSTREAM_DeviceDisconnected; }; Pipe_SelectPipe(MASS_STORE_DATA_IN_PIPE); Pipe_Freeze(); Pipe_SelectPipe(MASS_STORE_DATA_OUT_PIPE); Pipe_Freeze(); return PIPE_RWSTREAM_NoError; } /** Sends or receives the transaction's data stage to or from the attached device, reading or * writing to the nominated buffer. * * \param[in] SCSICommandBlock Pointer to a SCSI command block structure being sent to the attached device * \param[in,out] BufferPtr Pointer to the data buffer to read from or write to * * \return A value from the Pipe_Stream_RW_ErrorCodes_t enum */ static uint8_t MassStore_SendReceiveData(MS_CommandBlockWrapper_t* const SCSICommandBlock, void* BufferPtr) { uint8_t ErrorCode = PIPE_RWSTREAM_NoError; uint16_t BytesRem = SCSICommandBlock->DataTransferLength; /* Check the direction of the SCSI command data stage */ if (SCSICommandBlock->Flags & MS_COMMAND_DIR_DATA_IN) { /* Wait until the device has replied with some data */ if ((ErrorCode = MassStore_WaitForDataReceived()) != PIPE_RWSTREAM_NoError) return ErrorCode; /* Select the IN data pipe for data reception */ Pipe_SelectPipe(MASS_STORE_DATA_IN_PIPE); Pipe_Unfreeze(); /* Read in the block data from the pipe */ if ((ErrorCode = Pipe_Read_Stream_LE(BufferPtr, BytesRem, NULL)) != PIPE_RWSTREAM_NoError) return ErrorCode; /* Acknowledge the packet */ Pipe_ClearIN(); } else { /* Select the OUT data pipe for data transmission */ Pipe_SelectPipe(MASS_STORE_DATA_OUT_PIPE); Pipe_Unfreeze(); /* Write the block data to the pipe */ if ((ErrorCode = Pipe_Write_Stream_LE(BufferPtr, BytesRem, NULL)) != PIPE_RWSTREAM_NoError) return ErrorCode; /* Acknowledge the packet */ Pipe_ClearOUT(); while (!(Pipe_IsOUTReady())) { if (USB_HostState == HOST_STATE_Unattached) return PIPE_RWSTREAM_DeviceDisconnected; } } /* Freeze used pipe after use */ Pipe_Freeze(); return PIPE_RWSTREAM_NoError; } /** Routine to receive the current CSW from the device. * * \param[out] SCSICommandStatus Pointer to a destination where the returned status data should be stored * * \return A value from the Pipe_Stream_RW_ErrorCodes_t enum, or MASS_STORE_SCSI_COMMAND_FAILED if the SCSI command fails */ static uint8_t MassStore_GetReturnedStatus(MS_CommandStatusWrapper_t* const SCSICommandStatus) { uint8_t ErrorCode = PIPE_RWSTREAM_NoError; /* If an error in the command occurred, abort */ if ((ErrorCode = MassStore_WaitForDataReceived()) != PIPE_RWSTREAM_NoError) return ErrorCode; /* Select the IN data pipe for data reception */ Pipe_SelectPipe(MASS_STORE_DATA_IN_PIPE); Pipe_Unfreeze(); /* Load in the CSW from the attached device */ if ((ErrorCode = Pipe_Read_Stream_LE(SCSICommandStatus, sizeof(MS_CommandStatusWrapper_t), NULL)) != PIPE_RWSTREAM_NoError) { return ErrorCode; } /* Clear the data ready for next reception */ Pipe_ClearIN(); /* Freeze the IN pipe after use */ Pipe_Freeze(); /* Check to see if command failed */ if (SCSICommandStatus->Status != MS_SCSI_COMMAND_Pass) ErrorCode = MASS_STORE_SCSI_COMMAND_FAILED; return ErrorCode; } /** Issues a Mass Storage class specific request to reset the attached device's Mass Storage interface, * readying the device for the next CBW. The Data endpoints are cleared of any STALL condition once this * command completes successfully. * * \return A value from the USB_Host_SendControlErrorCodes_t enum, or MASS_STORE_SCSI_COMMAND_FAILED if the SCSI command fails */ uint8_t MassStore_MassStorageReset(void) { uint8_t ErrorCode; USB_ControlRequest = (USB_Request_Header_t) { .bmRequestType = (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE), .bRequest = MS_REQ_MassStorageReset, .wValue = 0, .wIndex = 0, .wLength = 0, }; /* Select the control pipe for the request transfer */ Pipe_SelectPipe(PIPE_CONTROLPIPE); if ((ErrorCode = USB_Host_SendControlRequest(NULL)) != HOST_SENDCONTROL_Successful) return ErrorCode; /* Select first data pipe to clear STALL condition if one exists */ Pipe_SelectPipe(MASS_STORE_DATA_IN_PIPE); if ((ErrorCode = USB_Host_ClearEndpointStall(Pipe_GetBoundEndpointAddress())) != HOST_SENDCONTROL_Successful) return ErrorCode; /* Select second data pipe to clear STALL condition if one exists */ Pipe_SelectPipe(MASS_STORE_DATA_OUT_PIPE); if ((ErrorCode = USB_Host_ClearEndpointStall(Pipe_GetBoundEndpointAddress())) != HOST_SENDCONTROL_Successful) return ErrorCode; return HOST_SENDCONTROL_Successful; } /** Issues a Mass Storage class specific request to determine the index of the highest numbered Logical * Unit in the attached device. * * \note Some devices do not support this request, and will STALL it when issued. To get around this, * on unsupported devices the max LUN index will be reported as zero and no error will be returned * if the device STALLs the request. * * \param[out] MaxLUNIndex Pointer to the location that the maximum LUN index value should be stored * * \return A value from the USB_Host_SendControlErrorCodes_t enum, or MASS_STORE_SCSI_COMMAND_FAILED if the SCSI command fails */ uint8_t MassStore_GetMaxLUN(uint8_t* const MaxLUNIndex) { uint8_t ErrorCode; USB_ControlRequest = (USB_Request_Header_t) { .bmRequestType = (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE), .bRequest = MS_REQ_GetMaxLUN, .wValue = 0, .wIndex = 0, .wLength = 1, }; /* Select the control pipe for the request transfer */ Pipe_SelectPipe(PIPE_CONTROLPIPE); if ((ErrorCode = USB_Host_SendControlRequest(MaxLUNIndex)) == HOST_SENDCONTROL_SetupStalled) { /* Clear the pipe stall */ Pipe_ClearStall(); /* Some faulty Mass Storage devices don't implement the GET_MAX_LUN request, so assume a single LUN */ *MaxLUNIndex = 0; /* Clear the error, and pretend the request executed correctly if the device STALLed it */ ErrorCode = HOST_SENDCONTROL_Successful; } return ErrorCode; } /** Issues a SCSI Inquiry command to the attached device, to determine the device's information. This * gives information on the device's capabilities. * * \param[in] LUNIndex Index of the LUN inside the device the command is being addressed to * \param[out] InquiryPtr Pointer to the inquiry data structure where the inquiry data from the device is to be stored * * \return A value from the Pipe_Stream_RW_ErrorCodes_t enum, or MASS_STORE_SCSI_COMMAND_FAILED if the SCSI command fails */ uint8_t MassStore_Inquiry(const uint8_t LUNIndex, SCSI_Inquiry_Response_t* const InquiryPtr) { /* Create a CBW with a SCSI command to issue INQUIRY command */ MS_CommandBlockWrapper_t SCSICommandBlock = (MS_CommandBlockWrapper_t) { .Signature = MS_CBW_SIGNATURE, .DataTransferLength = sizeof(SCSI_Inquiry_Response_t), .Flags = MS_COMMAND_DIR_DATA_IN, .LUN = LUNIndex, .SCSICommandLength = 6, .SCSICommandData = { SCSI_CMD_INQUIRY, 0x00, // Reserved 0x00, // Reserved 0x00, // Reserved sizeof(SCSI_Inquiry_Response_t), // Allocation Length 0x00 // Unused (control) } }; /* Send the command and any data to the attached device */ return MassStore_SendCommand(&SCSICommandBlock, InquiryPtr); } /** Issues a SCSI Request Sense command to the attached device, to determine the current SCSI sense information. This * gives error codes for the last issued SCSI command to the device. * * \param[in] LUNIndex Index of the LUN inside the device the command is being addressed to * \param[out] SensePtr Pointer to the sense data structure where the sense data from the device is to be stored * * \return A value from the Pipe_Stream_RW_ErrorCodes_t enum, or MASS_STORE_SCSI_COMMAND_FAILED if the SCSI command fails */ uint8_t MassStore_RequestSense(const uint8_t LUNIndex, SCSI_Request_Sense_Response_t* const SensePtr) { /* Create a CBW with a SCSI command to issue REQUEST SENSE command */ MS_CommandBlockWrapper_t SCSICommandBlock = (MS_CommandBlockWrapper_t) { .Signature = MS_CBW_SIGNATURE, .DataTransferLength = sizeof(SCSI_Request_Sense_Response_t), .Flags = MS_COMMAND_DIR_DATA_IN, .LUN = LUNIndex, .SCSICommandLength = 6, .SCSICommandData = { SCSI_CMD_REQUEST_SENSE, 0x00, // Reserved 0x00, // Reserved 0x00, // Reserved sizeof(SCSI_Request_Sense_Response_t), // Allocation Length 0x00 // Unused (control) } }; /* Send the command and any data to the attached device */ return MassStore_SendCommand(&SCSICommandBlock, SensePtr); } /** Issues a SCSI Device Block Read command to the attached device, to read in one or more data blocks from the * storage medium into a buffer. * * \param[in] LUNIndex Index of the LUN inside the device the command is being addressed to * \param[in] BlockAddress Start block address to read from * \param[in] Blocks Number of blocks to read from the device * \param[in] BlockSize Size in bytes of each block to read * \param[out] BufferPtr Pointer to the buffer where the read data is to be written to * * \return A value from the Pipe_Stream_RW_ErrorCodes_t enum, or MASS_STORE_SCSI_COMMAND_FAILED if the SCSI command fails */ uint8_t MassStore_ReadDeviceBlock(const uint8_t LUNIndex, const uint32_t BlockAddress, const uint8_t Blocks, const uint16_t BlockSize, void* BufferPtr) { /* Create a CBW with a SCSI command to read in the given blocks from the device */ MS_CommandBlockWrapper_t SCSICommandBlock = (MS_CommandBlockWrapper_t) { .Signature = MS_CBW_SIGNATURE, .DataTransferLength = ((uint32_t)Blocks * BlockSize), .Flags = MS_COMMAND_DIR_DATA_IN, .LUN = LUNIndex, .SCSICommandLength = 10, .SCSICommandData = { SCSI_CMD_READ_10, 0x00, // Unused (control bits, all off) (BlockAddress >> 24), // MSB of Block Address (BlockAddress >> 16), (BlockAddress >> 8), (BlockAddress & 0xFF), // LSB of Block Address 0x00, // Reserved 0x00, // MSB of Total Blocks to Read Blocks, // LSB of Total Blocks to Read 0x00 // Unused (control) } }; /* Send the command and any data to the attached device */ return MassStore_SendCommand(&SCSICommandBlock, BufferPtr); } /** Issues a SCSI Device Block Write command to the attached device, to write one or more data blocks to the * storage medium from a buffer. * * \param[in] LUNIndex Index of the LUN inside the device the command is being addressed to * \param[in] BlockAddress Start block address to write to * \param[in] Blocks Number of blocks to write to in the device * \param[in] BlockSize Size in bytes of each block to write * \param[in] BufferPtr Pointer to the buffer where the write data is to be sourced from * * \return A value from the Pipe_Stream_RW_ErrorCodes_t enum, or MASS_STORE_SCSI_COMMAND_FAILED if the SCSI command fails */ uint8_t MassStore_WriteDeviceBlock(const uint8_t LUNIndex, const uint32_t BlockAddress, const uint8_t Blocks, const uint16_t BlockSize, void* BufferPtr) { /* Create a CBW with a SCSI command to write the given blocks to the device */ MS_CommandBlockWrapper_t SCSICommandBlock = (MS_CommandBlockWrapper_t) { .Signature = MS_CBW_SIGNATURE, .DataTransferLength = ((uint32_t)Blocks * BlockSize), .Flags = MS_COMMAND_DIR_DATA_OUT, .LUN = LUNIndex, .SCSICommandLength = 10, .SCSICommandData = { SCSI_CMD_WRITE_10, 0x00, // Unused (control bits, all off) (BlockAddress >> 24), // MSB of Block Address (BlockAddress >> 16), (BlockAddress >> 8), (BlockAddress & 0xFF), // LSB of Block Address 0x00, // Unused (reserved) 0x00, // MSB of Total Blocks to Write Blocks, // LSB of Total Blocks to Write 0x00 // Unused (control) } }; /* Send the command and any data to the attached device */ return MassStore_SendCommand(&SCSICommandBlock, BufferPtr); } /** Issues a SCSI Device Test Unit Ready command to the attached device, to determine if the device is ready to accept * other commands. * * \param[in] LUNIndex Index of the LUN inside the device the command is being addressed to * * \return A value from the Pipe_Stream_RW_ErrorCodes_t enum, or MASS_STORE_SCSI_COMMAND_FAILED if the SCSI command fails */ uint8_t MassStore_TestUnitReady(const uint8_t LUNIndex) { /* Create a CBW with a SCSI command to issue TEST UNIT READY command */ MS_CommandBlockWrapper_t SCSICommandBlock = (MS_CommandBlockWrapper_t) { .Signature = MS_CBW_SIGNATURE, .DataTransferLength = 0, .Flags = MS_COMMAND_DIR_DATA_IN, .LUN = LUNIndex, .SCSICommandLength = 6, .SCSICommandData = { SCSI_CMD_TEST_UNIT_READY, 0x00, // Reserved 0x00, // Reserved 0x00, // Reserved 0x00, // Reserved 0x00 // Unused (control) } }; /* Send the command and any data to the attached device */ return MassStore_SendCommand(&SCSICommandBlock, NULL); } /** Issues a SCSI Device Read Capacity command to the attached device, to determine the capacity of the * given Logical Unit within the device. * * \param[in] LUNIndex Index of the LUN inside the device the command is being addressed to * \param[out] CapacityPtr Device capacity structure where the capacity data is to be stored * * \return A value from the Pipe_Stream_RW_ErrorCodes_t enum, or MASS_STORE_SCSI_COMMAND_FAILED if the SCSI command fails */ uint8_t MassStore_ReadCapacity(const uint8_t LUNIndex, SCSI_Capacity_t* const CapacityPtr) { uint8_t ErrorCode = PIPE_RWSTREAM_NoError; /* Create a CBW with a SCSI command to issue READ CAPACITY command */ MS_CommandBlockWrapper_t SCSICommandBlock = (MS_CommandBlockWrapper_t) { .Signature = MS_CBW_SIGNATURE, .DataTransferLength = sizeof(SCSI_Capacity_t), .Flags = MS_COMMAND_DIR_DATA_IN, .LUN = LUNIndex, .SCSICommandLength = 10, .SCSICommandData = { SCSI_CMD_READ_CAPACITY_10, 0x00, // Reserved 0x00, // MSB of Logical block address 0x00, 0x00, 0x00, // LSB of Logical block address 0x00, // Reserved 0x00, // Reserved 0x00, // Partial Medium Indicator 0x00 // Unused (control) } }; /* Send the command and any data to the attached device */ if ((ErrorCode = MassStore_SendCommand(&SCSICommandBlock, CapacityPtr)) != PIPE_RWSTREAM_NoError) return ErrorCode; /* Endian-correct the read data */ CapacityPtr->Blocks = SwapEndian_32(CapacityPtr->Blocks); CapacityPtr->BlockSize = SwapEndian_32(CapacityPtr->BlockSize); return ErrorCode; } /** Issues a SCSI Device Prevent/Allow Medium Removal command to the attached device, to lock the physical media from * being removed. This is a legacy command for SCSI disks with removable storage (such as ZIP disks), but should still * be issued before the first read or write command is sent. * * \param[in] LUNIndex Index of the LUN inside the device the command is being addressed to * \param[in] PreventRemoval Whether or not the LUN media should be locked to prevent removal or not * * \return A value from the Pipe_Stream_RW_ErrorCodes_t enum, or MASS_STORE_SCSI_COMMAND_FAILED if the SCSI command fails */ uint8_t MassStore_PreventAllowMediumRemoval(const uint8_t LUNIndex, const bool PreventRemoval) { /* Create a CBW with a SCSI command to issue PREVENT ALLOW MEDIUM REMOVAL command */ MS_CommandBlockWrapper_t SCSICommandBlock = (MS_CommandBlockWrapper_t) { .Signature = MS_CBW_SIGNATURE, .DataTransferLength = 0, .Flags = MS_COMMAND_DIR_DATA_OUT, .LUN = LUNIndex, .SCSICommandLength = 6, .SCSICommandData = { SCSI_CMD_PREVENT_ALLOW_MEDIUM_REMOVAL, 0x00, // Reserved 0x00, // Reserved PreventRemoval, // Prevent flag 0x00, // Reserved 0x00 // Unused (control) } }; /* Send the command and any data to the attached device */ return MassStore_SendCommand(&SCSICommandBlock, NULL); }