From: tmk <hasu@tmk-kbd.com>
Date: Tue, 29 Mar 2016 01:52:25 +0000 (+0900)
Subject: x68k_usb: Change config for TMK converter
X-Git-Url: https://git.gir.st/tmk_keyboard.git/commitdiff_plain/e3994a620b430df62ca675d433be8a11a79ba7f3

x68k_usb: Change config for TMK converter
---

diff --git a/converter/x68k_usb/Makefile b/converter/x68k_usb/Makefile
index 60e9a574..fd2eb199 100644
--- a/converter/x68k_usb/Makefile
+++ b/converter/x68k_usb/Makefile
@@ -4,7 +4,7 @@
 
 
 # Target file name (without extension).
-TARGET = x68k_usb_pjrc
+TARGET = x68k_usb
 
 # Directory common source filess exist
 TMK_DIR = ../../tmk_core
@@ -24,9 +24,10 @@ CONFIG_H = config_pjrc.h
 # MCU name, you MUST set this to match the board you are using
 # type "make clean" after changing this, so all files will be rebuilt
 #MCU = at90usb162       # Teensy 1.0
-MCU = atmega32u4       # Teensy 2.0
+#MCU = atmega32u4       # Teensy 2.0
 #MCU = at90usb646       # Teensy++ 1.0
 #MCU = at90usb1286      # Teensy++ 2.0
+MCU = atmega32u2       # Teensy 2.0
 
 
 # Processor frequency.
@@ -37,6 +38,29 @@ MCU = atmega32u4       # Teensy 2.0
 F_CPU = 16000000
 
 
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+#OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
 # Boot Section Size in bytes
 #   Teensy halfKay   512
 #   Atmel DFU loader 4096
@@ -85,9 +109,7 @@ AVRDUDE_FLAGS += $(AVRDUDE_NO_VERIFY)
 AVRDUDE_FLAGS += $(AVRDUDE_VERBOSE)
 AVRDUDE_FLAGS += $(AVRDUDE_ERASE_COUNTER)
 
-#PROGRAM_CMD = $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
-#PROGRAM_CMD = teensy_loader_cli -mmcu=$(MCU) -w -v $(TARGET).hex
-PROGRAM_CMD = dfu-programmer atmega32u4 flash $(TARGET).hex
+PROGRAM_CMD = $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
 
 
 # Search Path
@@ -95,7 +117,7 @@ VPATH += $(TARGET_DIR)
 VPATH += $(TMK_DIR)
 
 
-include $(TMK_DIR)/protocol/pjrc.mk
 include $(TMK_DIR)/protocol.mk
+include $(TMK_DIR)/protocol/lufa.mk
 include $(TMK_DIR)/common.mk
 include $(TMK_DIR)/rules.mk
diff --git a/converter/x68k_usb/config_pjrc.h b/converter/x68k_usb/config_pjrc.h
index c49b4a73..77989fe3 100644
--- a/converter/x68k_usb/config_pjrc.h
+++ b/converter/x68k_usb/config_pjrc.h
@@ -21,6 +21,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #define VENDOR_ID       0xFEED
 #define PRODUCT_ID      0x6800
+#define DEVICE_VER      0x0001
 #define MANUFACTURER    t.m.k.
 #define PRODUCT         SHARP X68000 keyboard converter
 #define DESCRIPTION     converts SHARP X68000 keyboard protocol into USB
@@ -45,7 +46,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* USART configuration
  *     asynchronous, 2400baud, 8-data bit, non parity, 1-stop bit, no flow control
  */
-#ifdef __AVR_ATmega32U4__
+#if defined(__AVR_ATmega32U4__) || defined(__AVR_ATmega32U2__)
     #define SERIAL_UART_BAUD       2400
     #define SERIAL_UART_DATA       UDR1
     #define SERIAL_UART_UBRR       ((F_CPU/(16UL*SERIAL_UART_BAUD))-1)