From 12f6e9ffa76f685f7256bf1421f918f90c93add1 Mon Sep 17 00:00:00 2001 From: tmk Date: Sat, 28 Apr 2012 01:57:36 +0900 Subject: [PATCH] Added M0110A support contributed by skagon@github. - README is written with markdown notation. - m0110.c can handles Arrow keys and Calc keys of M0110A. - EXTRAFLAGS and EXTRALDFLAGS are added in rules.mk to give flags on make command line. --- m0110.c | 79 +++++++++++++++++++++-- m0110.h | 42 +++++++++---- m0110_usb/README | 55 ---------------- m0110_usb/README.md | 141 +++++++++++++++++++++++++++++++++++++++++ m0110_usb/config.h | 5 +- m0110_usb/keymap.c | 148 +++++++++++++++++++++++++++++--------------- m0110_usb/matrix.c | 3 + rules.mk | 9 ++- 8 files changed, 354 insertions(+), 128 deletions(-) delete mode 100644 m0110_usb/README create mode 100644 m0110_usb/README.md diff --git a/m0110.c b/m0110.c index 522c3ec0..68ce2d1c 100644 --- a/m0110.c +++ b/m0110.c @@ -34,6 +34,7 @@ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ +/* M0110A Support was contributed by skagon@github */ #include #include @@ -43,6 +44,8 @@ POSSIBILITY OF SUCH DAMAGE. #include "debug.h" +static inline uint8_t inquiry(void); +static inline uint8_t instant(void); static inline void clock_lo(void); static inline void clock_hi(void); static inline bool clock_in(void); @@ -106,6 +109,23 @@ KEY EVENT: Moreover, the numpad keys =, /, * and + are preceded by shift-down 0x71 on press and shift-up 0xF1 on release. So, the data transferred by nupmad 5 is "79 2F" whereas for numpad + it's "71 79 0D". +ARROW KEYS: + Arrow keys and Pad+,*,/,=(Calc keys) share same byte sequence and its preceding byte + 0x71 and 0xF1 means press and release event of SHIFT. These cause very confusing situation. + It is difficult or impossible to tell Calc key from Arrow key with SHIFT in some cases. + + Raw key events: + press release + ---------------- ---------------- + Left: 0x79, 0x0D 0x79, 0x8D + Right: 0x79, 0x05 0x79, 0x85 + Up: 0x79, 0x1B 0x79, 0x9B + Down: 0x79, 0x11 0x79, 0x91 + Pad+: 0x71, 0x79, 0x0D 0xF1, 0x79, 0x8D + Pad*: 0x71, 0x79, 0x05 0xF1, 0x79, 0x85 + Pad/: 0x71, 0x79, 0x1B 0xF1, 0x79, 0x9B + Pad=: 0x71, 0x79, 0x11 0xF1, 0x79, 0x91 + SCAN CODE: m0111_recv_key() function returns follwing scan codes instead of raw key events. Scan codes are 1 byte long and bit7 is set when key is released. @@ -275,15 +295,62 @@ ERROR: uint8_t m0110_recv_key(void) { - uint8_t key; + static uint8_t keybuf = 0x00; + uint8_t key, key2, key3; + + if (keybuf) { + key = keybuf; + keybuf = 0x00; + return key; + } + key = instant(); // Use INSTANT for better response. Should be INQUIRY ? + switch (key) { + case M0110_KEYPAD: + // Pad/Arrow keys + return (M0110_RAW2SCAN(instant()) | M0110_KEYPAD_OFFSET); + break; + case M0110_SHIFT_MAKE: + case M0110_SHIFT_BREAK: + key2 = instant(); + if (key2 == M0110_KEYPAD) { + key3 = instant(); + switch (key3) { + case M0110_ARROW_UP: + case M0110_ARROW_DOWN: + case M0110_ARROW_LEFT: + case M0110_ARROW_RIGHT: + // Calc keys + return (M0110_RAW2SCAN(key3) | M0110_CALC_OFFSET); + default: + // Shift + Pad/Arrow keys + keybuf = M0110_RAW2SCAN(key3); + return (M0110_RAW2SCAN(key) | M0110_KEYPAD_OFFSET); + } + } else { + // Shift + other keys + keybuf = M0110_RAW2SCAN(key2); + return M0110_RAW2SCAN(key); + } + break; + default: + // other keys + return M0110_RAW2SCAN(key); + break; + } +} + + +static inline uint8_t inquiry(void) +{ m0110_send(M0110_INQUIRY); - key = m0110_recv(); - if (key == 0xFF || key == M0110_NULL) - return M0110_NULL; - else - return M0110_RAW2SCAN(key); + return m0110_recv(); } +static inline uint8_t instant(void) +{ + m0110_send(M0110_INSTANT); + return m0110_recv(); +} static inline void clock_lo() { diff --git a/m0110.h b/m0110.h index 287c45b5..39da4ad6 100644 --- a/m0110.h +++ b/m0110.h @@ -54,23 +54,39 @@ POSSIBILITY OF SUCH DAMAGE. # error "M0110 data port setting is required in config.h" #endif -#define M0110_INQUIRY 0x10 -#define M0110_INSTANT 0x14 -#define M0110_MODEL 0x16 -#define M0110_TEST 0x36 - -#define M0110_PAD 0x79 -#define M0110_NULL 0x7B -#define M0110_TEST_ACK 0x7D -#define M0110_TEST_NAK 0x77 - +/* Commands */ +#define M0110_INQUIRY 0x10 +#define M0110_INSTANT 0x14 +#define M0110_MODEL 0x16 +#define M0110_TEST 0x36 + +/* Response(raw byte from M0110) */ +#define M0110_NULL 0x7B +#define M0110_KEYPAD 0x79 +#define M0110_TEST_ACK 0x7D +#define M0110_TEST_NAK 0x77 +#define M0110_SHIFT_MAKE 0x71 +#define M0110_SHIFT_BREAK 0xF1 +#define M0110_ARROW_UP 0x1B +#define M0110_ARROW_DOWN 0x11 +#define M0110_ARROW_LEFT 0x0D +#define M0110_ARROW_RIGHT 0x05 + +/* This inidcates no response. */ +#define M0110_ERROR 0xFF /* scan code offset for keypad and arrow keys */ #define M0110_KEYPAD_OFFSET 0x40 -#define M0110_ARROW_OFFSET 0x60 +#define M0110_CALC_OFFSET 0x60 /* convert key event raw response into scan code */ -#define M0110_RAW2SCAN(key) ((key&(1<<7)) | ((key&0x7F)>>1)) +#define M0110_RAW2SCAN(key) ( \ + (key == M0110_NULL) ? M0110_NULL : ( \ + (key == M0110_ERROR) ? M0110_ERROR : ( \ + ((key&0x80) | ((key&0x7F)>>1)) \ + ) \ + ) \ +) extern uint8_t m0110_error; @@ -80,5 +96,7 @@ void m0110_init(void); uint8_t m0110_send(uint8_t data); uint8_t m0110_recv(void); uint8_t m0110_recv_key(void); +uint8_t m0110_inquiry(void); +uint8_t m0110_instant(void); #endif diff --git a/m0110_usb/README b/m0110_usb/README deleted file mode 100644 index 6ef98757..00000000 --- a/m0110_usb/README +++ /dev/null @@ -1,55 +0,0 @@ -M0110 to USB keyboard converter -=============================== -This firmware converts the protocol of Apple Macintosh keyboard M0110 into USB. - - -Connection ----------- -You need 4P4C plug and cable to connect Teensy into M0110. -Teensy port F0 is assigned for CLOCK line and F1 for DATA by default, you can change pin configuration with editing config.h.. - -Plug: - http://en.wikipedia.org/wiki/Modular_connector#4P4C - -Pinout: - http://www.kbdbabel.org/conn/kbd_connector_macplus.png - 1(Black): GND - 2(Red): CLOCK - 3(Green): DATA - 4(Yellow): +5V - - - -Build Frimware --------------- -Optionally edit Makefile and config.h for build options, pin configuration or MCU. - -$ cd m0110_usb -$ make -and program your Teensy with loader. - - - -Keymap ------- -You can change a keymap by editing code of keymap.c like following. -How to define the keymap is probably obvious. You can find key symbols in usb_keycodes.h. - -This is a default keymap for M0110. -,---------------------------------------------------------. -| `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Bacpa| -|---------------------------------------------------------| -|Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \| -|---------------------------------------------------------| -|CapsLo| A| S| D| F| G| H| J| K| L| ;| '|Return| -|---------------------------------------------------------| -|Shift | Z| X| C| V| B| N| M| ,| ,| /|Shift | -`---------------------------------------------------------' - |Opt|Alt | Space |Alt |Opt| - `-----------------------------------------------' - - -Notes ------ - -EOF diff --git a/m0110_usb/README.md b/m0110_usb/README.md new file mode 100644 index 00000000..a948af91 --- /dev/null +++ b/m0110_usb/README.md @@ -0,0 +1,141 @@ +M0110/M0110A to USB keyboard converter +====================================== +This firmware converts the protocol of Apple Macintosh keyboard M0110/M0110A into USB. +Target board of this project is [PJRC Teensy](http://www.pjrc.com/teensy/), though, +you can use other board with USB AVR like `ATmega32U4` and `AT90USB`. + +![M0110](https://github.com/tmk/tmk_keyboard/raw/master/m0110_usb/doc/m0110.jpg) + +M0110A support was contributed by [skagon@github](https://github.com/skagon). + + + +Connection +---------- +You need 4P4C plug and cable to connect Teensy or other AVR dev board into the keyboard. +Teensy port `PF0` is assigned for `CLOCK` line and `PF1` for `DATA` by default, +you can change pin configuration with editing *config.h*. + +You can find 4P4C plugs on telephone handset cable. Note that it is *crossover* connection +while Macintosh keyboard cable is *straight*. + +[![Conection](http://i.imgur.com/vJoVOm.jpg)](http://i.imgur.com/vJoVO.jpg) + +In this pic: + +1. `GND`(Black) +2. `CLOCK`(Red) +3. `DATA`(Green) +4. `+5V`(Yellow) + +Not that wire colors may vary in your cable. + + +### Pinout +- +- + +![Jack fig](http://www.kbdbabel.org/conn/kbd_connector_macplus.png) + + +### Pull-up Registor +You may need pull-up registors on signal lines(`CLOCK`, `DATA`) in particular +when you have long or coiled cable. 1k-10k Ohm will be OK for this purpose. +In some cases MCU can't read signal from keyboard correctly without pull-up resistors. + + + +Building Frimware +----------------- +To compile firmware you need AVR GCC. You can use [WinAVR](http://winavr.sourceforge.net/) on Windows. +You can edit *Makefile* and *config.h* to change compile options and pin configuration. + + $ git clone ... (or download source) + $ cd m0110_usb + $ make + +and program your Teensy with [PJRC Teensy loader](http://www.pjrc.com/teensy/loader.html). + + + +Keymap +------ +You can change keymaps by editing *keymap.c*. + +### M0110 +#### *Default* + ,---------------------------------------------------------. + | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backs| + |---------------------------------------------------------| + |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \| + |---------------------------------------------------------| + |Fn0 | A| S| D| F| G| H| J| K| L| ;| '|Return| + |---------------------------------------------------------| + |Shift | Z| X| C| V| B| N| M| ,| ,| /|Shift | + `---------------------------------------------------------' + |Ctr|Alt | Space |Gui |Ctr| + `-----------------------------------------------' + You can register Esc by hitting(press&release) Fn0 quickly. + +#### *HHKB/WASD cursor Layer(Fn0)* + ,---------------------------------------------------------. + |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Delet| + |---------------------------------------------------------| + |Caps |Hom| Up|PgU| | | | |Psc|Slk|Pau|Up |Ins| \| + |---------------------------------------------------------| + |Fn0 |Lef|Dow|Rig| | | | |Hom|PgU|Lef|Rig|Return| + |---------------------------------------------------------| + |Shift |End| |PgD| |VoD|VoU|Mut|End|PgD|Dow|Shift | + `---------------------------------------------------------' + |Ctr|Alt | Space |Gui |Ctr| + `-----------------------------------------------' + +### M0110A +#### *Default* + ,---------------------------------------------------------. ,---------------. + | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backs| |Gui| =| /| *| + |---------------------------------------------------------| |---------------| + |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| | | 7| 8| 9| -| + |-----------------------------------------------------' | |---------------| + |Fn0 | A| S| D| F| G| H| J| K| L| ;| '|Return| | 4| 5| 6| +| + |---------------------------------------------------------| |---------------| + |Shift | Z| X| C| V| B| N| M| ,| ,| /|Shft|Up | | 1| 2| 3| | + |---------------------------------------------------------| |-----------|Ent| + |Ctrl |Alt | Space | \|Lft|Rgt|Dn | | 0| .| | + `---------------------------------------------------------' `---------------' +#### *HHKB/WASD cursor Layer(Fn0)* + ,---------------------------------------------------------. ,---------------. + |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Delet| |Nlk| =| /| *| + |---------------------------------------------------------| |---------------| + |Caps |Hom| Up|PgU| | | | |Psc|Slk|Pau|Up |Ins| | | 7| 8| 9| -| + |-----------------------------------------------------' | |---------------| + |Fn0 |Lef|Dow|Rig| | | | |Hom|PgU|Lef|Rig|Return| | 4| 5| 6| +| + |---------------------------------------------------------| |---------------| + |Shift |End| |PgD| |VoD|VoU|Mut|End|PgD|Dow|Shif|Up | | 1| 2| 3| | + |---------------------------------------------------------| |-----------|Ent| + |Ctrl |Alt | Space | \|Lft|Rgt|Dn | | 0| .| | + `---------------------------------------------------------' `---------------' + + + +Debug +----- +You can use [PJRC HID listen](http://www.pjrc.com/teensy/hid_listen.html) to see debug output. + +The converter has some functions for debug, press `Alt+Gui+H` simultaneously to get help. +These function is totally undocumented, tentative, inconsistent and buggy. + + + +Arrow Keys +---------- +Dedicated arrow keys of the M0110A are transmitting the same scancodes as the keypad but also, +its [=], [/], [*] and [+] keys (hereafter referred to as "calc" keys) are not assigned new +scancodes but, instead, transmit a sequence of scancodes which emulates the [Shift] key press, +followed by the same scancode sequence of the arrow keys! +The problem with that approach is that, while in most cases it's easy to distinguish between +a user-generated [Shift] key event (press or release) followed by an arrow or a calc key and +a simulated [Shift] key event generated upon a calc key event, when the user is typing fairly +fast, it is possible that the two events become indistinguishable, and produce undesired results +-- nothing major, though, just one or two stray characters or cursor movements; it will NOT +format your drives, kill your cat or make your wife run away with the pizza boy. diff --git a/m0110_usb/config.h b/m0110_usb/config.h index c12e0738..de20d7c8 100644 --- a/m0110_usb/config.h +++ b/m0110_usb/config.h @@ -30,7 +30,7 @@ along with this program. If not, see . /* matrix size */ -#define MATRIX_ROWS 8 +#define MATRIX_ROWS 14 #define MATRIX_COLS 8 /* Locking Caps Lock support */ @@ -38,8 +38,7 @@ along with this program. If not, see . /* key combination for command */ #define IS_COMMAND() ( \ - keyboard_report->mods == (MOD_BIT(KB_LSHIFT) | MOD_BIT(KB_LCTRL) | MOD_BIT(KB_LALT) | MOD_BIT(KB_LGUI)) || \ - keyboard_report->mods == (MOD_BIT(KB_LSHIFT) | MOD_BIT(KB_RSHIFT)) \ + keyboard_report->mods == (MOD_BIT(KB_LALT) | MOD_BIT(KB_LGUI)) \ ) diff --git a/m0110_usb/keymap.c b/m0110_usb/keymap.c index bbb699a9..8c509a59 100644 --- a/m0110_usb/keymap.c +++ b/m0110_usb/keymap.c @@ -14,10 +14,8 @@ GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see . */ +/* M0110A Support was contributed by skagon@github */ -/* - * Keymap for ADB keyboard - */ #include #include #include @@ -31,16 +29,12 @@ along with this program. If not, see . #define KEYCODE(layer, row, col) (pgm_read_byte(&keymaps[(layer)][(row)][(col)])) -// Convert physical keyboard layout to matrix array. -// This is a macro to define keymap easily in keyboard layout form. -// TODO: layout for M0110A -/* M0110 */ #define KEYMAP( \ - K32,K12,K13,K14,K15,K17,K16,K1A,K1C,K19,K1D,K1B,K18,K33, \ - K30,K0C,K0D,K0E,K0F,K11,K10,K20,K22,K1F,K23,K21,K1E,K2A, \ - K39,K00,K01,K02,K03,K05,K04,K26,K28,K25,K29,K27, K24, \ - K38,K06,K07,K08,K09,K0B,K2D,K2E,K2B,K2F,K2C, \ - K3A,K37, K31, K34 \ + K32,K12,K13,K14,K15,K17,K16,K1A,K1C,K19,K1D,K1B,K18,K33, K47,K68,K6D,K62, \ + K30,K0C,K0D,K0E,K0F,K11,K10,K20,K22,K1F,K23,K21,K1E, K59,K5B,K5C,K4E, \ + K39,K00,K01,K02,K03,K05,K04,K26,K28,K25,K29,K27, K24, K56,K57,K58,K66, \ + K38,K06,K07,K08,K09,K0B,K2D,K2E,K2B,K2F,K2C, K4D, K53,K54,K55,K4C, \ + K3A,K37, K31, K34,K2A,K46,K42,K48, K52, K41 \ ) { \ { KB_##K00, KB_##K01, KB_##K02, KB_##K03, KB_##K04, KB_##K05, KB_##K06, KB_##K07 }, \ { KB_##K08, KB_##K09, KB_NO, KB_##K0B, KB_##K0C, KB_##K0D, KB_##K0E, KB_##K0F }, \ @@ -49,7 +43,13 @@ along with this program. If not, see . { KB_##K20, KB_##K21, KB_##K22, KB_##K23, KB_##K24, KB_##K25, KB_##K26, KB_##K27 }, \ { KB_##K28, KB_##K29, KB_##K2A, KB_##K2B, KB_##K2C, KB_##K2D, KB_##K2E, KB_##K2F }, \ { KB_##K30, KB_##K31, KB_##K32, KB_##K33, KB_##K34, KB_NO, KB_NO, KB_##K37 }, \ - { KB_##K38, KB_##K39, KB_##K3A, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO } \ + { KB_##K38, KB_##K39, KB_##K3A, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO }, \ + { KB_NO, KB_##K41, KB_##K42, KB_NO, KB_NO, KB_NO, KB_##K46, KB_##K47 }, \ + { KB_##K48, KB_NO, KB_NO, KB_NO, KB_##K4C, KB_##K4D, KB_##K4E, KB_NO }, \ + { KB_NO, KB_NO, KB_##K52, KB_##K53, KB_##K54, KB_##K55, KB_##K56, KB_##K57 }, \ + { KB_##K58, KB_##K59, KB_NO, KB_##K5B, KB_##K5C, KB_NO, KB_NO, KB_NO }, \ + { KB_NO, KB_NO, KB_##K62, KB_NO, KB_NO, KB_NO, KB_##K66, KB_NO }, \ + { KB_##K68, KB_NO, KB_NO, KB_NO, KB_NO, KB_##K6D, KB_NO, KB_NO }, \ } @@ -68,9 +68,14 @@ static const uint8_t PROGMEM fn_layer[] = { // Assign Fn key(0-7) to a keycode sent when release Fn key without use of the layer. // See layer.c for details. static const uint8_t PROGMEM fn_keycode[] = { - KB_SCOLON, // Fn0 - KB_SLASH, // Fn1 + KB_ESC, // Fn0 +#ifdef HASU + KB_SCOLON, // Fn1 + KB_SLASH, // Fn2 +#else + KB_NO, // Fn1 KB_NO, // Fn2 +#endif KB_NO, // Fn3 KB_NO, // Fn4 KB_NO, // Fn5 @@ -79,52 +84,97 @@ static const uint8_t PROGMEM fn_keycode[] = { }; static const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - // LShift and RShift are logically same one button. - // LOption and ROption are logically same one button. - /* Default Layer: plain keymap - * ,---------------------------------------------------------. - * | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Bacpa| - * |---------------------------------------------------------| - * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \| - * |---------------------------------------------------------| - * |Contro| A| S| D| F| G| H| J| K| L|Fn0| '|Return| - * |---------------------------------------------------------| - * |Shift | Z| X| C| V| B| N| M| ,| ,|Fn1| Shift| - * `---------------------------------------------------------' - * |Fn2|Alt | Space |Gui |Fn2| - * `-----------------------------------------------' + /* + * The keymap works with both M0110 and M0110A keyboards. As you can see, the M0110A is a superset + * of the M0110 keyboard, with only one exception: the right Alt key(Enter in M0110) does not exist + * on the M0110A, but since it generates a unique scan code which is not used for some other key in + * the M0110A, they are totally interchangeable. In fact, the M0110A is functionally (almost) + * identical to the combination of the M0110 along with the M0120 keypad. The only difference + * (which is causing some problems as you will read below) is that the M0110+M0120 don't have + * dedicated arrow keys, while the M0110A does. However, the M0120 did have arrow keys, which + * doubled as the [comma], [/], [*] and [+] keys, when used with the [Shift] key. The M0110A has + * substituted the [comma] key with the [=] key, however its scancode is the same. + * + * Default: + * ,---------------------------------------------------------. ,---------------. + * | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backs| |Gui| =| /| *| + * |---------------------------------------------------------| |---------------| + * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| | | 7| 8| 9| -| + * |-----------------------------------------------------' | |---------------| + * |Fn0 | A| S| D| F| G| H| J| K| L| ;| '|Return| | 4| 5| 6| +| + * |---------------------------------------------------------| |---------------| + * |Shift | Z| X| C| V| B| N| M| ,| ,| /|Shft|Up | | 1| 2| 3| | + * |---------------------------------------------------------| |-----------|Ent| + * |Ctrl |Alt | Space |Gui| \|Lft|Rgt|Dn | | 0| .| | + * `---------------------------------------------------------' `---------------' + * You can register Esc by hitting(press&release) Fn0 quickly. + * + * HHKB/WASD cursor Layer(Fn0): + * ,---------------------------------------------------------. ,---------------. + * |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Delet| |Nlk| =| /| *| + * |---------------------------------------------------------| |---------------| + * |Caps |Hom| Up|PgU| | | | |Psc|Slk|Pau|Up |Ins| | | 7| 8| 9| -| + * |-----------------------------------------------------' | |---------------| + * |Fn0 |Lef|Dow|Rig| | | | |Hom|PgU|Lef|Rig|Return| | 4| 5| 6| +| + * |---------------------------------------------------------| |---------------| + * |Shift |End| |PgD| |VoD|VoU|Mut|End|PgD|Dow|Shif|Up | | 1| 2| 3| | + * |---------------------------------------------------------| |-----------|Ent| + * |Ctrl |Alt | Space |Gui | \|Lft|Rgt|Dn | | 0| .| | + * `---------------------------------------------------------' `---------------' + * + * NOTE: Key between Space and \ in above diagram is M0110 Enter(assigned to Gui). + * NOTE: LShift and RShift are logically same key. (M0110, M0110A) + * NOTE: LOption and ROption are logically same key. (M0110) */ +#ifdef HASU KEYMAP( - GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, BSPC, - TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC,BSLS, - LCTL,A, S, D, F, G, H, J, K, L, FN0, QUOT, ENT, - LSFT,Z, X, C, V, B, N, M, COMM,DOT, FN1, - FN2, LALT, SPC, LGUI + ESC, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, BSPC, ESC, PEQL,PSLS,PAST, + TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC, P7, P8, P9, PMNS, + LCTL,A, S, D, F, G, H, J, K, L, FN1, QUOT, ENT, P4, P5, P6, PPLS, + LSFT,Z, X, C, V, B, N, M, COMM,DOT, FN2, UP, P1, P2, P3, PENT, + FN0, LALT, SPC, LGUI,BSLS,LEFT,DOWN,RGHT, P0, PDOT + ), + // HHKB & WASD + KEYMAP( + GRV, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, DEL, NLCK,PEQL,PSLS,PAST, + CAPS,HOME,UP, PGUP,NO, NO, NO, NO, PSCR,SLCK,BRK, UP, INS, P7, P8, P9, PMNS, + LCTL,LEFT,DOWN,RGHT,NO, NO, NO, NO, HOME,PGUP,LEFT,RGHT, ENT, P4, P5, P6, PPLS, + LSFT,END, NO, PGDN,NO, VOLD,VOLU,MUTE,END, PGDN,DOWN, UP, P1, P2, P3, PENT, + FN0, LALT, SPC, LGUI,BSLS,LEFT,DOWN,RGHT, P0, PDOT ), // vi mousekeys KEYMAP( - ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, DEL, - CAPS,NO, NO, NO, NO, NO, WH_L,WH_D,WH_U,WH_R,NO, NO, NO, NO, - LCTL,VOLD,VOLU,MUTE,NO, NO, MS_L,MS_D,MS_U,MS_R,FN0, NO, ENT, - LSFT,NO, NO, NO, NO, BTN3,BTN2,BTN1,NO, NO, NO, - NO, LALT, BTN1, LGUI + GRV, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, DEL, NLCK,PEQL,PSLS,PAST, + CAPS,NO, NO, NO, NO, NO, WH_L,WH_D,WH_U,WH_R,NO, NO, NO, P7, P8, P9, PMNS, + NO, VOLD,VOLU,MUTE,NO, NO, MS_L,MS_D,MS_U,MS_R,FN1, NO, ENT, P4, P5, P6, PPLS, + LSFT,NO, NO, NO, NO, BTN3,BTN2,BTN1,NO, NO, NO, UP, P1, P2, P3, PENT, + LCTL,LALT, BTN1, LGUI,BSLS,LEFT,DOWN,RGHT, P0, PDOT ), // vi cusorkeys KEYMAP( - ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, DEL, - CAPS,NO, NO, NO, NO, NO, HOME,PGDN,PGUP,END, NO, NO, NO, NO, - LCTL,NO, NO, NO, NO, NO, LEFT,DOWN,UP, RGHT,NO, NO, ENT, - LSFT,NO, NO, NO, NO, NO, HOME,PGDN,PGUP,END, FN1, - NO, LALT, SPC, LGUI + GRV, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, DEL, NLCK,PEQL,PSLS,PAST, + CAPS,NO, NO, NO, NO, NO, HOME,PGDN,PGUP,END, NO, NO, NO, P7, P8, P9, PMNS, + NO, NO, NO, NO, NO, NO, LEFT,DOWN,UP, RGHT,NO, NO, ENT, P4, P5, P6, PPLS, + LSFT,NO, NO, NO, NO, NO, HOME,PGDN,PGUP,END, FN2, UP, P1, P2, P3, PENT, + LCTL,LALT, SPC, LGUI,BSLS,LEFT,DOWN,RGHT, P0, PDOT + ), +#else + KEYMAP( + GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, BSPC, LGUI,PEQL,PSLS,PAST, + TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC, P7, P8, P9, PMNS, + FN0, A, S, D, F, G, H, J, K, L, SCLN,QUOT, ENT, P4, P5, P6, PPLS, + LSFT,Z, X, C, V, B, N, M, COMM,DOT, SLSH, UP, P1, P2, P3, PENT, + LCTL,LALT, SPC, LGUI,BSLS,LEFT,DOWN,RGHT, P0, PDOT ), // HHKB & WASD KEYMAP( - ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, DEL, - CAPS,HOME,UP, PGUP,NO, NO, NO, NO, PSCR,SLCK,BRK, UP, NO, NO, - LCTL,LEFT,DOWN,RGHT,NO, NO, NO, NO, HOME,PGUP,LEFT,RGHT, ENT, - LSFT,END, NO, PGDN,NO, VOLD,VOLU,MUTE,END, PGDN,DOWN, - FN2, LALT, SPC, LGUI + ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, DEL, NLCK,PEQL,PSLS,PAST, + CAPS,HOME,UP, PGUP,NO, NO, NO, NO, PSCR,SLCK,BRK, UP, INS, P7, P8, P9, PMNS, + FN0, LEFT,DOWN,RGHT,NO, NO, NO, NO, HOME,PGUP,LEFT,RGHT, ENT, P4, P5, P6, PPLS, + LSFT,END, NO, PGDN,NO, VOLD,VOLU,MUTE,END, PGDN,DOWN, UP, P1, P2, P3, PENT, + LCTL,LALT, SPC, LGUI,BSLS,LEFT,DOWN,RGHT, P0, PDOT ), +#endif }; diff --git a/m0110_usb/matrix.c b/m0110_usb/matrix.c index f045920c..11303ee0 100644 --- a/m0110_usb/matrix.c +++ b/m0110_usb/matrix.c @@ -93,6 +93,9 @@ uint8_t matrix_scan(void) #endif if (key == M0110_NULL) { return 0; + } else if (key == M0110_ERROR) { + // TODO: error recovery or reinit + return 0; } else { #ifdef MATRIX_HAS_LOCKING_CAPS if (host_keyboard_leds() & (1<