From 799993c414416c8b23acfaf8f2701ea514d10080 Mon Sep 17 00:00:00 2001 From: Jun Wako Date: Wed, 22 Apr 2015 13:52:28 +0900 Subject: [PATCH] Update README --- README.md | 95 +++++++++++-------------------------------------------- 1 file changed, 19 insertions(+), 76 deletions(-) diff --git a/README.md b/README.md index dd03e140..78817a84 100644 --- a/README.md +++ b/README.md @@ -5,6 +5,17 @@ This is a keyboard firmware with some useful features for Atmel AVR controller. Source code is available here: +Updates +------- +#### 2015/04/22 +Core library was separated to other branch `core`. + +In `Makefile` you need to set `TMK_DIR` to indicate core library location now. + + TMK_DIR = ../../tmk_core + + + Features -------- These features can be used in your keyboard. @@ -26,6 +37,7 @@ These features can be used in your keyboard. * Backlight - Control backlight levels + Projects -------- You can find some keyboard specific projects under `converter` and `keyboard` directory. @@ -139,13 +151,14 @@ Following commands can be also executed with `Magic` + key. In console mode `Mag Caps: Lock Keyboard(Child Proof) Paus: jump to bootloader -**TBD** -### Boot Magic Configuration - Virtual DIP Switch + +Boot Magic Configuration - Virtual DIP Switch +--------------------------------------------- Boot Magic are executed during boot up time. Press Magic key below then plug in keyboard cable. Note that you must use keys of **Layer 0** as Magic keys. These settings are stored in EEPROM so that retain your configure over power cycles. -To avoid configuring accidentally additive salt key `KC_SPACE` also needs to be pressed along with the following configuration keys. The salt key is configurable in `config.h`. See [common/bootmagic.h](common/bootmagic.h). +To avoid configuring accidentally additive salt key `KC_SPACE` also needs to be pressed along with the following configuration keys. The salt key is configurable in `config.h`. See [tmk_core/common/bootmagic.h](tmk_core/common/bootmagic.h). #### General - Skip reading EEPROM to start with default configuration(`ESC`) @@ -180,12 +193,6 @@ To avoid configuring accidentally additive salt key `KC_SPACE` also needs to be - Set Default Layer to 6(`6`) - Set Default Layer to 7(`7`) -#### Caution -Unintentional use of this feature will cause user confusion. - -TODO: Magic key combination to avoid unintentional press during plug in - -**TBD** Mechanical Locking support @@ -196,39 +203,10 @@ This feature makes it possible for you to use mechanical switch for `CapsLock`, #define LOCKING_RESYNC_ENABLE + Start Your Own Project ----------------------- **TBD** -### Config.h Options -#### 1. USB vendor/product ID and device description - #define VENDOR_ID 0xFEED - #define PRODUCT_ID 0xBEEF - #define MANUFACTURER t.m.k. - #define PRODUCT Macway mod - #define DESCRIPTION t.m.k. keyboard firmware for Macway mod - -#### 2. Keyboard matrix configuration - #define MATRIX_ROWS 8 - #define MATRIX_COLS 8 - #define MATRIX_HAS_GHOST - - - -Architecture ------------- - Architecture Diagram - +---------------+---------------+-------------+ - | Host | Keyboard | Matrix, LED | - ___________ |-----------+-+ +-------------+ | +-----------| - / /| Keys/Mouse | Protocol |d| | Action | | | Protocol | - /__________/ |<-----------| LUFA |r| | Layer, Tap | | | Matrix | - |.--------.| | LED | V-USB |i| |-------------| | | PS/2,IBM | __________________ - || || |----------->| PJRC |v| | Keymap | | | ADB,M0110| Keys / /_/_/_/_/_/_/_/ /| - || Host || | Console | iWRAP(BT)|e| | Mousekey | | | SUN/NEWS |<----------/ /_/_/_/_/_/_/_/ / / - ||________||/.<-----------| UART |r| | Report | | | X68K/PC98| Control / /_/_/_/_/_/_/_/ / / - `_========_'/| |---------------------------------------------|-------->/___ /_______/ ___/ / - |_o______o_|/ | Sendchar, Print, Debug, Command, ... | |_________________|/ - +---------------------------------------------+ Keyboard @@ -236,52 +214,17 @@ Debugging -------- Use PJRC's `hid_listen` to see debug messages. You can use the tool for debug even if firmware use LUFA stack. -You can use xprintf() to display debug info on `hid_listen`, see `common/xprintf.h`. +You can use xprintf() to display debug info on `hid_listen`, see `tmk_core/common/xprintf.h`. Files and Directories ------------------- ### Top -* common/ - common codes -* protocol/ - keyboard protocol support +* tmk_core/ - core library * keyboard/ - keyboard projects * converter/ - protocol converter projects * doc/ - documents -* common.mk - Makefile for common -* protocol.mk - Makefile for protocol -* rules.mk - Makefile for build rules - -### Common -* host.h -* host_driver.h -* keyboard.h -* command.h -* keymap.h -* action.h -* keycode.h -* matrix.h -* led.h -* mousekey.h -* report.h -* debug.h -* print.h -* bootloader.h -* sendchar.h -* timer.h -* util.h - -### Keyboard Protocols -* lufa/ - LUFA USB stack -* pjrc/ - PJRC USB stack -* vusb/ - Objective Development V-USB -* iwrap/ - Bluetooth HID for Bluegiga iWRAP -* ps2.c - PS/2 protocol -* adb.c - Apple Desktop Bus protocol -* m0110.c - Macintosh 128K/512K/Plus keyboard protocol -* news.c - Sony NEWS keyboard protocol -* x68k.c - Sharp X68000 keyboard protocol -* serial_soft.c - Asynchronous Serial protocol implemented by software -- 2.39.3