From e7c2af78b704bfddb581559d42cc7cc31ffab0bf Mon Sep 17 00:00:00 2001 From: tmk Date: Mon, 29 Jul 2013 00:53:18 +0900 Subject: [PATCH] Change README Makefile and config.h in hhkb --- keyboard/hhkb/{Makefile.lufa => Makefile} | 4 +- keyboard/hhkb/README.md | 72 ++++++++--------------- keyboard/hhkb/config.h | 19 +----- 3 files changed, 29 insertions(+), 66 deletions(-) rename keyboard/hhkb/{Makefile.lufa => Makefile} (97%) diff --git a/keyboard/hhkb/Makefile.lufa b/keyboard/hhkb/Makefile similarity index 97% rename from keyboard/hhkb/Makefile.lufa rename to keyboard/hhkb/Makefile index 262282a0..1ef0a018 100644 --- a/keyboard/hhkb/Makefile.lufa +++ b/keyboard/hhkb/Makefile @@ -57,7 +57,9 @@ CONFIG_H = config.h # MCU name +# PJRC Teensy++ 2.0 #MCU = at90usb1286 +# TMK Alt Controller or PJRC Teensy 2.0 MCU = atmega32u4 # Processor frequency. @@ -100,7 +102,7 @@ OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT # Boot Section Size in *bytes* # Teensy halfKay 512 # Teensy++ halfKay 1024 -# Atmel DFU loader 4096 +# Atmel DFU loader 4096 (TMK Alt Controller) # LUFA bootloader 4096 # USBaspLoader 2048 OPT_DEFS += -DBOOTLOADER_SIZE=4096 diff --git a/keyboard/hhkb/README.md b/keyboard/hhkb/README.md index b9e0b534..3959ae85 100644 --- a/keyboard/hhkb/README.md +++ b/keyboard/hhkb/README.md @@ -8,7 +8,6 @@ See [this thread][AltController] in geekhack.org. [HHKB]: http://www.pfu.fujitsu.com/hhkeyboard/ [AltController]: http://geekhack.org/index.php?topic=12047.0 -[Teensy]: http://www.pjrc.com/teensy/ ##Features @@ -22,8 +21,8 @@ See README of [tmk_keyboard] for more. [tmk_keyboard]: http://github.com/tmk/tmk_keyboard ###Pros -* No risk: Everything is all reversible -* Without PCB trace cutting, case mod or any destructives +* No risks: Everything is all reversible +* No need for PCB trace patching, case cutting or any other destructive mod * Can keep original controller intact * Can change all HHKB behaviour as you like @@ -41,61 +40,35 @@ See [doc/HHKB.txt](doc/HHKB.txt) and files under [doc/](doc/) for internal of HH ##Build Firmware & Program -You can choose some combination of hardware and USB protocol stack([LUFA], [PJRC]). +See [this document](../../doc/build.md) first. -### Install Tools -See [this document](../../doc/build.md). +### Configuration +Set `MCU`, `BOOTLOADER_SIZE` and other build options in `Makefile` and `config.h`. -### TMK Alt Controller Board - $ make -f Makefile.tmk +### Build +Just run make after intall tools. -This programs the controller with [dfu-programmer] if the tool is intalled and configured properly. + $ make - $ make -f Makefile.tmk dfu - -Push reset button and program with [FLIP]. The tool should be intalled and configured properly. - - $ make -f Makefile.tmk flip - -Or you can also program with FLIP GUI. - -[dfu-programmer]: http://dfu-programmer.sourceforge.net/ -[FLIP]: http://www.atmel.com/tools/FLIP.aspx - - -### PJRC Teensy++ -Build with [LUFA] USB stack: - - $ make -f Makefile.lufa - -or with [PJRC] USB stack: +Use `Makefile.pjrc` if you want to use PJRC stack instead of LUFA.(LUFA is recommended.) $ make -f Makefile.pjrc -Push reset button and program with [Teensy Loader(command line)]. The tool should be intalled and configured properly. - - $ make -f Makefile.lufa teensy - $ make -f Makefile.pjrc teensy - -Or you can also program with [Teensy Loader(GUI)]. +Use `Makefile.vusb` for [V-USB] controller.(not supported actively any more.) + $ make -f Makefile.vusb -[LUFA]: http://www.fourwalledcubicle.com/LUFA.php -[PJRC]: http://www.pjrc.com/teensy/usb_keyboard.html -[Teensy Loader(command line)]: http://www.pjrc.com/teensy/loader_cli.html -[Teensy Loader(GUI)]: http://www.pjrc.com/teensy/loader.html +### Program +First, push reset button on board to start bootloader. +This command programs the controller with [dfu-programmer] if the tool is intalled and configured properly. -###AVR Mega with [V-USB] -Build: - $ make -f Makefile.vusb + $ make dfu -Program [USBaspLoader] on MCU with AVR programmer like [AVRISPmkII] and tool like [avrdude]. +Or you can also use [FLIP] command to program. Also the tool should be intalled and configured properly. FLIP GUI app is also available. -You can programs with [avrdude] once you have programmed [USBaspLoader] on MCU. - $ make -f Makefile.vusb program + $ make flip -[AVRISPmkII]: http://www.atmel.com/tools/AVRISPMKII.aspx -[avrdude]: http://www.nongnu.org/avrdude/ +Use [Teensy Loader] if your controller is Teensy/Teensy++. ##How to Customize @@ -103,7 +76,7 @@ See [tmk_keyboard] documents. ##Hardware -You have some options for hardware. Development boards with USB AVR family(ATMega32U4, AT90USB1286) like Teensy will work while MegaAVR with V-USB library is also cheapear option for DIY. +You have some options for hardware. Development boards with USB AVR family(ATMega32U4, AT90USB1286) like Teensy will work while MegaAVR with [V-USB] library is also cheapear option for DIY. ###1. TMK Alt Controller Board TMK designed [Keyboard Controller Board for HHKB Pro2(KiCad project)](https://github.com/tmk/HHKB_controller). @@ -127,7 +100,6 @@ See [this post](http://geekhack.org/index.php?topic=12047.msg948923#msg948923). +---------------+ - NOTE: PJRC [Teensy](http://www.pjrc.com/teensy/) -[Teensy Loader]: http://www.pjrc.com/teensy/loader.html ###3. V-USB connection +---+ +---------------+ @@ -156,5 +128,11 @@ See [this post](http://geekhack.org/index.php?topic=12047.msg948923#msg948923). - NOTE: See [V-USB] documentation for more detail of hardware and the USB stack. - NOTE: [USBaspLoader] is very useful for firmware update. + +[LUFA]: http://www.fourwalledcubicle.com/LUFA.php +[PJRC]: http://www.pjrc.com/teensy/usb_keyboard.html +[dfu-programmer]: http://dfu-programmer.sourceforge.net/ +[FLIP]: http://www.atmel.com/tools/FLIP.aspx +[Teensy Loader]: http://www.pjrc.com/teensy/loader.html [V-USB]: http://www.obdev.at/products/vusb/index.html [USBaspLoader]: http://www.obdev.at/products/vusb/usbasploader.html diff --git a/keyboard/hhkb/config.h b/keyboard/hhkb/config.h index ebee0c03..83a911be 100644 --- a/keyboard/hhkb/config.h +++ b/keyboard/hhkb/config.h @@ -31,27 +31,10 @@ along with this program. If not, see . #define MATRIX_ROWS 8 #define MATRIX_COLS 8 -/* - * Boot magic keys - * call some function by pressing key when pluging cable or powering on. - */ -/* key position on matrix(ROW:COL) */ -#define KEY_FN 0x54 -#define KEY_D 0x14 -#define KEY_IS_ON(key) matrix_is_on((key)>>4, (key)&0xF) -/* kick up bootloader */ -#define IS_BOOTMAGIC_BOOTLOADER() KEY_IS_ON(KEY_FN) -/* debug on */ -#define IS_BOOTMAGIC_DEBUG() KEY_IS_ON(KEY_D) - /* key combination for command */ #define IS_COMMAND() (keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT))) -/* mouse keys */ -#ifdef MOUSEKEY_ENABLE -# define MOUSEKEY_DELAY_TIME 100 -#endif /* period of tapping(ms) */ #define TAPPING_TERM 300 @@ -62,11 +45,11 @@ along with this program. If not, see . /* Boot Magic salt key: Space */ #define BOOTMAGIC_KEY_SALT KC_FN6 + /* * Feature disable options * These options are also useful to firmware size reduction. */ - /* disable debug print */ //#define NO_DEBUG -- 2.39.3