Improve Find mode search start position

[VimFx.git] / documentation / options.md

<!--
This is part of the VimFx documentation.
Copyright Simon Lydell 2015, 2016.
See the file README.md for copying conditions.
-->

# Options

VimFx has many options that can be configured, but they all have nice defaults
so you shouldn’t need to.

Advanced users might also be interested in [styling] VimFx and writing a [config
file].

[styling]: styling.md
[config file]: config-file.md


## Regular options

These options are available in VimFx’s settings page in the Add-ons Manager
(where you can also customize [keyboard shortcuts]).

[keyboard shortcuts]: shortcuts.md

### Hint chars

The characters used for the hints in Hints mode, which can be entered using one
of the many `f` commands. See also [The `f` commands].

[The `f` commands]: commands.md#the-f-commands--hints-mode

### “Previous”/“Next” link patterns

Space separated lists of patterns that match links to the previous/next page.
Used by the `[` and `]` commands.

There is a standardized way for websites to tell browsers the URLs to the
previous and next page. VimFx looks for that information in the first place.
Unfortunately, many websites don’t provide this information. Then VimFx falls
back on looking for links on the page that seem to go to the previous/next page
using patterns.

The patterns are matched at the beginning and end of link text (and the
attributes defined by the advanced setting [`pattern_attrs`]). The patterns do
not match in the middle of words, so “previous” does not match “previously”.
The matching is case <strong>in</strong>sensitive.

Actually, the patterns are regular expressions. If you do not know what a
regular expression is, that’s fine. You can type simple patterns like the
default ones without problems. If you do know what it is, though, you have the
possibility to create more advanced patterns if needed.

Some of the default patterns are English words. You might want to add
alternatives in your own language.

Note: If you need to include a space in your pattern, use `\s`. For example:
`next\spage`.

[`pattern_attrs`]: #pattern_attrs

### Blacklist

Space separated list of URLs where VimFx should automatically enter Ignore mode.
Example:

    *example.com*  http://example.org/editor/*

Note that the URLs in the list must match the current URL _entirely_ for it to
apply. Therefore it is easiest to always use the `*` wildcard (which matches
zero or more characters).

Set the option to `*` to make VimFx start out in Ignore mode _everywhere._

When you’re done editing the blacklist, go to one of the pages you intend to
match. If you already have a tab open for that page, reload it. Then look at
VimFx’s [button] to see if your edits work out.

Note that when Ignore mode is automatically entered because of the blacklist, it
is also automatically exited (returning to Normal mode) if you go to a
non-blacklisted page in the same tab. On the other hand, if you entered Ignore
mode by pressing `i`, you’ll stay in Ignore mode in that tab until you exit it,
even if you navigate to another page.

You might also want to read about the [Ignore mode `<s-f1>` command][s-f1].

[button]: button.md
[s-f1]: commands.md#ignore-mode-s-f1

#### Blacklisting specific elements

VimFx automatically enters Ignore mode while Vim-style editors are focused, such
as the [wasavi] extension and [CodeMirror editors in Vim mode][codemirror-vim].

By default, VimFx lets you press `<escape>` to blur text inputs. Also by
default, Vim-style editors use `<escape>` to exit from their Insert mode to
their Normal mode. In other words, there is a keyboard shortcut conflict here.

It makes the most sense to let the Vim-style editor “win.” That’s why VimFx
(temporarily) enters Ignore mode when focusing such an editor. In Insert mode,
there is no `<escape>` shortcut (by default), and thus no conflict. Instead,
there’s `<s-escape>` to blur the current element and exit Ignore mode.
`<s-escape>` was chosen because it is very unlikely to cause conflicts. If it
ever does, there’s the [`<s-f1>`] command to the rescue.

There is currently no way of specifying your own elements to be blacklisted, but
such a feature could be added if there’s demand for it.

[wasavi]: http://appsweets.net/wasavi/
[codemirror-vim]: https://codemirror.net/demo/vim.html
[`<s-f1>`]: commands.md#ignore-mode-s-f1

### Prevent autofocus

Many sites autofocus their search box, for example. This might be annoying when
browsing using the keyboard, as you do with VimFx, because it often feels like
VimFx isn’t responding, until you realize that you are typing in a text box—not
running VimFx commands!

For this reason VimFx can prevent autofocus. It’s not enabled by default,
though, since one of VimFx’s key features is to be nice to your browser and your
habits.

If enabled, all focusing that occurs on page load, or after you’ve just switched
back to a tab from another, until you interact with the page is prevented.

#### Technical notes and trivia

Autofocus on page load and when coming back to a tab are the two most common
cases. Some sites, though, automatically focus a text input in other cases as
well. Trying to catch those cases as well, VimFx used to prevent all focusing
that didn’t occur within a fixed number of milliseconds after your last
interaction (click or keypress). However, this proved to be too aggressive,
preventing too much focusing. In other words, the time-based check was not
sufficient to distinguish between intended focusing and automatic unwanted
focusing. It made things worse more than it helped. Since these cases are so
difficult (if not impossible) to detect, it is better to leave them. Thankfully
they are not very common.

On page load or when coming back to a tab, before you have interacted with the
page in any way, we can be _sure_ that any focusing is automatic (not caused by
you), which makes it safe to prevent all focusing in those time spans.

### Ignore keyboard layout

If you use more than one keyboard layout, you probably want to enable this
option.

People who use a keyboard layout _without_ the letters A–Z usually also use the
standard en-US QWERTY layout as well.

This option makes VimFx ignore your current layout and pretend that the standard
en-US QWERTY layout is _always_ used. This way the default shortcuts work even
if your layout doesn’t contain the letters A–Z and all shortcuts can be typed by
the same physical keys on your keyboard regardless of your current keyboard
layout.

(If you’d like VimFx to pretend that some other keyboard layout than the
standard en-US QWERTY is always used, you may do so with the special option
[`translations`].)

[`translations`]: #translations

### Timeout

The maximum amount of time (in milliseconds) that may pass between two
keypresses of a shortcut.

It’s easy to press, say, `a` by mistake while browsing. Without a timeout, you
might be surprised that all search results are highlighted when you a bit later
try to search using the `/` command. (That’s what `a/` does.) _With_ a timeout,
the `a` would be cancelled when the timeout has passed.


## Advanced options

These options are _not_ available in VimFx’s settings page in the Add-ons
Manager. They can only be changed in [about:config] or using a [config file].
They all start with `extensions.VimFx.`.

(There are actually a few more advanced options than those listed here. You can
see them all in [defaults.coffee].)

[about:config]: http://kb.mozillazine.org/About:config
[config file]: config-file.md
[defaults.coffee]: ../extension/lib/defaults.coffee

### `notifications_enabled`

Controls whether [notifications] should be shown or not.

You can also choose to show notifications any way you want by listening for the
[the `notification` and `hideNotification` events][notification-events].

[notifications]: notifications.md
[notification-events]: api.md#the-notification-and-hidenotification-events

### `notify_entered_keys`

If enabled, a [notification] is shown with the keys you have entered so far of
a command. This is only noticeable if you type a multi-key shortcut or use a
count.

[notification]: notifications.md

### `prevent_target_blank`

You might have noticed that some links open in new tabs when you click them.
That is not the case if you “click” them using VimFx’s `f` command, though. If
you dislike that, disable this option.

### `counts_enabled`

Controls whether [counts] are enabled or not.

[counts]: commands.md#counts

### `find_from_top_of_viewport`

Toggles whether the various find commands are Vim-style or Firefox
default-style.

Disable this pref if you want `/` to work more like `<c-f>` and `n`/`N` to work
more like `<f3>`/`<s-f3>`.

If there is selected text on the page, Firefox starts searching after that.
VimFx does so too, but only if the selection is currently _visible_ (inside the
current viewport).

If there _isn’t_ selected text on the page, Firefox starts searching from the
top of the page. VimFx instead starts searching from the top of the current
viewport.

The VimFx behavior is designed to be less disorienting. It is also similar to
how searching in Vim works. Again, you can return to the Firefox default
behavior (if you prefer that) by disabling this pref.

One of the main benefits of the VimFx behavior is that you can scroll past a
block of the text with lots of search matches and then continue going through
matches with `n` after that block, without having to spam `n` lots and lots of
times.

### `ignore_ctrl_alt`

This option is enabled by default on Windows, and disabled otherwise.

If enabled, ignores ctrl+alt for printable keys. `<a-c-$>` becomes `$` and
`<a-c-A>` becomes `A`, while `<a-c-enter>` stays the same.

This option is suitable on Windows, which treats [AltGr as
ctrl+alt][wikipedia-altgr]. For example, if a user of the sv-SE layout on
Windows holds AltGr and presses the key labeled `4`, in order to produce a `$`,
the result would be `<a-c-$>` without this option, making it impossible to
trigger a keyboard shortcut containing `$`. _With_ this option the result is
`$`, as expected (and as on GNU/Linux). On the other hand it won’t be possible
to trigger keyboard shortcuts such as `<a-c-a>`, but ctrl+alt keyboard shortcuts
are [discouraged on Windows][wikipedia-altgr] anyway because of this reason.

[wikipedia-altgr]: https://en.wikipedia.org/wiki/AltGr_key#Control_.2B_Alt_as_a_substitute

### `prevent_autofocus_modes`

Space separated list of modes where `prevent_autofocus` should be used.

### `config_file_directory`

VimFx can optionally be customized using a [config file]. If you want to that,
you need to tell VimFx where that file is. That’s what this pref is for.

By default this pref is blank (the empty string), which means that no config
file should be loaded.

If non-blank, it should be the path to the directory where the config file
exists. See the [config file] documentation for more information.

[config file]: config-file.md

### `hints_timeout`

The number of milliseconds a matched hint marker should stay on screen before
disappearing (or resetting).

### `hints_sleep`

In Hints mode, VimFx continually checks if the element for a hint marker has
moved. If so, the marker is moved as well. This pref controls how many
milliseconds VimFx should “sleep” between each check. The shorter, the more CPU
usage, the longer, the more stuttery marker movement.

The default value should work fine, but if you have a low-performing computer
and you notice bothering CPU usage during Hints mode you might want to raise the
sleep time.

Set it to -1 to disable the marker movement feature entirely.

### Scrolling prefs

Apart from its own prefs, VimFx also respects a few built-in Firefox prefs.

#### Smooth scrolling

If you want to customize Firefox’s smooth scrolling, adjusting
`general.smoothScroll.{lines,pages,other}.duration{Min,Max}MS` is the way to
go. VimFx has similar prefs for the scrolling commands, but they work like
`layout.css.scroll-behavior.spring-constant`.

Basically, the higher the value, the faster the scrolling.

These are VimFx’s variants, and the commands they affect:

- `smoothScroll.lines.spring-constant`: `h`, `l`, `j`, `k`
- `smoothScroll.pages.spring-constant`: `d`, `u`, `<space>`, `<s-space>`
- `smoothScroll.other.spring-constant`: `gg`, `G`, `0`, `^`, `$`

Note that the value of these prefs are _strings,_ not numbers!

The Firefox pref `general.smoothScroll` lets you turn off smooth scrolling
entirely, including all of VimFx’s scrolling commands.

`general.smoothScroll.lines`, `general.smoothScroll.pages`, and
`general.smoothScroll.other` lets you selectively disable smooth scrolling.
VimFx’s scrolling commands follow the same “lines,” “pages” and “other”
categorization as in the above list.

#### Scroll step

By default you can scroll using the arrow keys in Firefox. You can control how
much they scroll by adjusting the following prefs:

- `toolkit.scrollbox.horizontalScrollDistance`: `<left>`, `<right>`, `h`, `l`
- `toolkit.scrollbox.verticalScrollDistance`:   `<down>`, `<up>`,    `j`, `k`

(VimFx used to have a `scroll_step` pref, but is has been replaced by the
above.)

#### `scroll.full_page_adjustment` and `scroll.half_page_adjustment`

An important use case for scrolling a full page down is to read an entire page
(a window-full) of text, press `<space>` and then continue reading the next
page. However, if you can only see, say, _half_ of the height the last line,
pressing `<space>` would give you the other half, but reading only the top or
bottom parts of letters is difficult. Even if the lines happen to line up with
the window edge to not be sliced horizontally, it might feel disorienting
pressing `<space>`.

For this reason, both VimFx and Firefox by default scroll _about a line less
than a whole page_ when pressing `<space>`. This solves the sliced-last-line
problem, and provides some context on where you are in the text you’re reading.

These two prefs control how many pixels “about a line” actually means for the
different page scrolling commands.

- `scroll.full_page_adjustment`: `<space>, `<s-space>`
- `scroll.half_page_adjustment`: `d`, `u`

#### `scroll.last_position_mark`

The special mark for the [`` ` ``][scroll-to-mark] command that takes you to the
last position.

[scroll-to-mark]: commands.md#marks-m-and-

### `pattern_selector`

A CSS selector that targets candidates for a previous/next page link.

### `pattern_attrs`

A space-separated list of attributes that the [“Previous”/“Next” link patterns]
should be matched against.

[“Previous”/“Next” link patterns]: #previousnext-link-patterns

### `hints_toggle_in_tab`

If the keypress that matched a hint starts with this string, toggle whether to
open the matched link in the current tab or a new tab. See [The `f` commands]
for more information.

### `hints_toggle_in_background`

If the keypress that matched a hint starts with this string, open the matched
link in a new tab and toggle whether to open that tab in the background or
foreground. See [The `f` commands] for more information.

### `activatable_element_keys`

Keys that should not trigger VimFx commands but be sent through to the page if
an “activatable” element (link or button) is focused.

### `adjustable_element_keys`

Keys that should not trigger VimFx commands but be sent through to the page if
an “adjustable” element (form control or video player) is focused.

### `focus_previous_key` and `focus_next_key`

The default values are `<s-tab` and `<tab>`, respectively. Those keys are
specially handled after focusing a text input using [`gi`]. To disable this
special handling, set the prefs to the empty string.

[`gi`]: commands.md#gi-1


## Special options

These options are available in neither VimFx’s settings page in the Add-ons
Manager nor in [about:config]. The only way to change them is by using the
a [config file].

### `translations`

See the description of the `translations` option in [vim-like-key-notation].

[vim-like-key-notation]: https://github.com/lydell/vim-like-key-notation#api

### `categories`

See the documentation for [`vimfx.get('categories')`][categories].

[categories]: api.md#vimfxgetcategories