2 # Makefile for PJRC Teensy
6 # Target file name (without extension).
9 # Directory common source filess exist
12 # Directory keyboard dependent files exist
15 # keyboard dependent files
22 CONFIG_H
= config_pjrc.h
25 # MCU name, you MUST set this to match the board you are using
26 # type "make clean" after changing this, so all files will be rebuilt
27 #MCU = at90usb162 # Teensy 1.0
28 MCU
= atmega32u4
# Teensy 2.0
29 #MCU = at90usb646 # Teensy++ 1.0
30 #MCU = at90usb1286 # Teensy++ 2.0
33 # Processor frequency.
34 # Normally the first thing your program should do is set the clock prescaler,
35 # so your program will run at the correct speed. You should also set this
36 # variable to same clock speed. The _delay_ms() macro uses this, and many
37 # examples use this variable to calculate timings. Do not add a "UL" here.
42 # *Comment out* to disable the options.
44 MOUSEKEY_ENABLE
= yes
# Mouse keys
45 EXTRAKEY_ENABLE
= yes
# Audio control and System control
46 NKRO_ENABLE
= yes
# USB Nkey Rollover
50 #---------------- Programming Options --------------------------
52 # Type: avrdude -c ? to get a full listing.
53 AVRDUDE_PROGRAMMER
= avr109
54 AVRDUDE_PORT
= /dev
/ttyACM0
55 AVRDUDE_WRITE_FLASH
= -U flash
:w
:$(TARGET
).hex
56 #AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep
58 # Uncomment the following if you want avrdude's erase cycle counter.
59 # Note that this counter needs to be initialized first using -Yn,
61 #AVRDUDE_ERASE_COUNTER = -y
63 # Uncomment the following if you do /not/ wish a verification to be
64 # performed after programming the device.
65 #AVRDUDE_NO_VERIFY = -V
67 # Increase verbosity level. Please use this when submitting bug
68 # reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude>
69 # to submit bug reports.
70 #AVRDUDE_VERBOSE = -v -v
72 AVRDUDE_FLAGS
= -p
$(MCU
) -P
$(AVRDUDE_PORT
) -c
$(AVRDUDE_PROGRAMMER
)
73 #AVRDUDE_FLAGS = -p $(MCU) -c $(AVRDUDE_PROGRAMMER)
74 AVRDUDE_FLAGS
+= $(AVRDUDE_NO_VERIFY
)
75 AVRDUDE_FLAGS
+= $(AVRDUDE_VERBOSE
)
76 AVRDUDE_FLAGS
+= $(AVRDUDE_ERASE_COUNTER
)
78 #PROGRAM_CMD = $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
79 #PROGRAM_CMD = teensy_loader_cli -mmcu=$(MCU) -w -v $(TARGET).hex
80 PROGRAM_CMD
= dfu-programmer atmega32u4 flash
$(TARGET
).hex
84 include $(COMMON_DIR
)/pjrc.mk
85 include $(COMMON_DIR
)/common.mk