tool/mbed/mbed-sdk/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F1/stm32f1xx_ll_usb.h

   1 /**
   2   ******************************************************************************
   3   * @file    stm32f1xx_ll_usb.h
   4   * @author  MCD Application Team
   5   * @version V1.0.0
   6   * @date    15-December-2014
   7   * @brief   Header file of USB Low Layer HAL module.
   8   ******************************************************************************
   9   * @attention
  10   *
  11   * <h2><center>&copy; COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
  12   *
  13   * Redistribution and use in source and binary forms, with or without modification,
  14   * are permitted provided that the following conditions are met:
  15   *   1. Redistributions of source code must retain the above copyright notice,
  16   *      this list of conditions and the following disclaimer.
  17   *   2. Redistributions in binary form must reproduce the above copyright notice,
  18   *      this list of conditions and the following disclaimer in the documentation
  19   *      and/or other materials provided with the distribution.
  20   *   3. Neither the name of STMicroelectronics nor the names of its contributors
  21   *      may be used to endorse or promote products derived from this software
  22   *      without specific prior written permission.
  23   *
  24   * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
  25   * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
  26   * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
  27   * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
  28   * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  29   * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
  30   * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
  31   * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
  32   * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
  33   * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  34   *
  35   ******************************************************************************
  36   */
  37
  38 /* Define to prevent recursive inclusion -------------------------------------*/
  39 #ifndef __STM32F1xx_LL_USB_H
  40 #define __STM32F1xx_LL_USB_H
  41
  42 #ifdef __cplusplus
  43  extern "C" {
  44 #endif
  45
  46 #if defined(STM32F102x6) || defined(STM32F102xB) || \
  47     defined(STM32F103x6) || defined(STM32F103xB) || \
  48     defined(STM32F103xE) || defined(STM32F103xG) || \
  49     defined(STM32F105xC) || defined(STM32F107xC)
  50
  51 /* Includes ------------------------------------------------------------------*/
  52 #include "stm32f1xx_hal_def.h"
  53
  54 /** @addtogroup STM32F1xx_HAL_Driver
  55   * @{
  56   */
  57
  58 /** @addtogroup USB_LL
  59   * @{
  60   */
  61
  62 /* Exported types ------------------------------------------------------------*/
  63 /** @defgroup USB_LL_Exported_Types USB Low Layer Exported Types
  64   * @{
  65   */
  66 /**
  67   * @brief  USB Mode definition
  68   */
  69 typedef enum
  70 {
  71    USB_DEVICE_MODE  = 0,
  72    USB_HOST_MODE    = 1,
  73    USB_DRD_MODE     = 2
  74 }USB_ModeTypeDef;
  75
  76 #if defined (USB_OTG_FS)
  77 /**
  78   * @brief  URB States definition
  79   */
  80 typedef enum {
  81   URB_IDLE = 0,
  82   URB_DONE,
  83   URB_NOTREADY,
  84   URB_NYET,
  85   URB_ERROR,
  86   URB_STALL
  87 }USB_OTG_URBStateTypeDef;
  88
  89 /**
  90   * @brief  Host channel States  definition
  91   */
  92 typedef enum {
  93   HC_IDLE = 0,
  94   HC_XFRC,
  95   HC_HALTED,
  96   HC_NAK,
  97   HC_NYET,
  98   HC_STALL,
  99   HC_XACTERR,
 100   HC_BBLERR,
 101   HC_DATATGLERR
 102 }USB_OTG_HCStateTypeDef;
 103
 104 /**
 105   * @brief  USB OTG Initialization Structure definition
 106   */
 107 typedef struct
 108 {
 109   uint32_t dev_endpoints;        /*!< Device Endpoints number.
 110                                       This parameter depends on the used USB core.
 111                                       This parameter must be a number between Min_Data = 1 and Max_Data = 15 */
 112
 113   uint32_t Host_channels;        /*!< Host Channels number.
 114                                       This parameter Depends on the used USB core.
 115                                       This parameter must be a number between Min_Data = 1 and Max_Data = 15 */
 116
 117   uint32_t speed;                /*!< USB Core speed.
 118                                       This parameter can be any value of @ref USB_Core_Speed_                */
 119
 120   uint32_t ep0_mps;              /*!< Set the Endpoint 0 Max Packet size.
 121                                       This parameter can be any value of @ref USB_EP0_MPS_                   */
 122
 123   uint32_t Sof_enable;           /*!< Enable or disable the output of the SOF signal.                        */
 124
 125   uint32_t low_power_enable;     /*!< Enable or disable the low power mode.                                  */
 126
 127   uint32_t vbus_sensing_enable;  /*!< Enable or disable the VBUS Sensing feature.                            */
 128
 129   uint32_t use_external_vbus;    /*!< Enable or disable the use of the external VBUS.                        */
 130 }USB_OTG_CfgTypeDef;
 131
 132 typedef struct
 133 {
 134   uint8_t   num;            /*!< Endpoint number
 135                                 This parameter must be a number between Min_Data = 1 and Max_Data = 15    */
 136
 137   uint8_t   is_in;          /*!< Endpoint direction
 138                                 This parameter must be a number between Min_Data = 0 and Max_Data = 1     */
 139
 140   uint8_t   is_stall;       /*!< Endpoint stall condition
 141                                 This parameter must be a number between Min_Data = 0 and Max_Data = 1     */
 142
 143   uint8_t   type;           /*!< Endpoint type
 144                                  This parameter can be any value of @ref USB_EP_Type_                     */
 145
 146   uint8_t   data_pid_start; /*!< Initial data PID
 147                                 This parameter must be a number between Min_Data = 0 and Max_Data = 1     */
 148
 149   uint8_t   even_odd_frame; /*!< IFrame parity
 150                                  This parameter must be a number between Min_Data = 0 and Max_Data = 1    */
 151
 152   uint16_t  tx_fifo_num;    /*!< Transmission FIFO number
 153                                  This parameter must be a number between Min_Data = 1 and Max_Data = 15   */
 154
 155   uint32_t  maxpacket;      /*!< Endpoint Max packet size
 156                                  This parameter must be a number between Min_Data = 0 and Max_Data = 64KB */
 157
 158   uint8_t   *xfer_buff;     /*!< Pointer to transfer buffer                                               */
 159
 160   uint32_t  dma_addr;       /*!< 32 bits aligned transfer buffer address                                  */
 161
 162   uint32_t  xfer_len;       /*!< Current transfer length                                                  */
 163
 164   uint32_t  xfer_count;     /*!< Partial transfer length in case of multi packet transfer                 */
 165 }USB_OTG_EPTypeDef;
 166
 167 typedef struct
 168 {
 169   uint8_t   dev_addr ;     /*!< USB device address.
 170                                 This parameter must be a number between Min_Data = 1 and Max_Data = 255    */
 171
 172   uint8_t   ch_num;        /*!< Host channel number.
 173                                 This parameter must be a number between Min_Data = 1 and Max_Data = 15     */
 174
 175   uint8_t   ep_num;        /*!< Endpoint number.
 176                                 This parameter must be a number between Min_Data = 1 and Max_Data = 15     */
 177
 178   uint8_t   ep_is_in;      /*!< Endpoint direction
 179                                 This parameter must be a number between Min_Data = 0 and Max_Data = 1      */
 180
 181   uint8_t   speed;         /*!< USB Host speed.
 182                                 This parameter can be any value of @ref USB_Core_Speed_                    */
 183
 184   uint8_t   do_ping;       /*!< Enable or disable the use of the PING protocol for HS mode.                */
 185
 186   uint8_t   process_ping;  /*!< Execute the PING protocol for HS mode.                                     */
 187
 188   uint8_t   ep_type;       /*!< Endpoint Type.
 189                                 This parameter can be any value of @ref USB_EP_Type_                       */
 190
 191   uint16_t  max_packet;    /*!< Endpoint Max packet size.
 192                                 This parameter must be a number between Min_Data = 0 and Max_Data = 64KB   */
 193
 194   uint8_t   data_pid;      /*!< Initial data PID.
 195                                 This parameter must be a number between Min_Data = 0 and Max_Data = 1      */
 196
 197   uint8_t   *xfer_buff;    /*!< Pointer to transfer buffer.                                                */
 198
 199   uint32_t  xfer_len;      /*!< Current transfer length.                                                   */
 200
 201   uint32_t  xfer_count;    /*!< Partial transfer length in case of multi packet transfer.                  */
 202
 203   uint8_t   toggle_in;     /*!< IN transfer current toggle flag.
 204                                 This parameter must be a number between Min_Data = 0 and Max_Data = 1      */
 205
 206   uint8_t   toggle_out;    /*!< OUT transfer current toggle flag
 207                                 This parameter must be a number between Min_Data = 0 and Max_Data = 1      */
 208
 209   uint32_t  dma_addr;      /*!< 32 bits aligned transfer buffer address.                                   */
 210
 211   uint32_t  ErrCnt;        /*!< Host channel error count.*/
 212
 213   USB_OTG_URBStateTypeDef  urb_state;  /*!< URB state.
 214                                            This parameter can be any value of @ref USB_OTG_URBStateTypeDef */
 215
 216   USB_OTG_HCStateTypeDef   state;     /*!< Host Channel state.
 217                                            This parameter can be any value of @ref USB_OTG_HCStateTypeDef  */
 218 }USB_OTG_HCTypeDef;
 219 #endif /* USB_OTG_FS */
 220
 221 #if defined (USB)
 222 /**
 223   * @brief  USB Initialization Structure definition
 224   */
 225 typedef struct
 226 {
 227   uint32_t dev_endpoints;        /*!< Device Endpoints number.
 228                                       This parameter depends on the used USB core.
 229                                       This parameter must be a number between Min_Data = 1 and Max_Data = 15 */
 230
 231   uint32_t speed;                /*!< USB Core speed.
 232                                       This parameter can be any value of @ref USB_Core_Speed                 */
 233
 234   uint32_t ep0_mps;              /*!< Set the Endpoint 0 Max Packet size.
 235                                       This parameter can be any value of @ref USB_EP0_MPS                    */
 236
 237   uint32_t phy_itface;           /*!< Select the used PHY interface.
 238                                       This parameter can be any value of @ref USB_Core_PHY                   */
 239
 240   uint32_t Sof_enable;           /*!< Enable or disable the output of the SOF signal.                        */
 241
 242   uint32_t low_power_enable;       /*!< Enable or disable Low Power mode                                      */
 243
 244   uint32_t lpm_enable;             /*!< Enable or disable Battery charging.                                  */
 245
 246   uint32_t battery_charging_enable; /*!< Enable or disable Battery charging.                                  */
 247 } USB_CfgTypeDef;
 248
 249 typedef struct
 250 {
 251   uint8_t   num;            /*!< Endpoint number
 252                                 This parameter must be a number between Min_Data = 1 and Max_Data = 15    */
 253
 254   uint8_t   is_in;          /*!< Endpoint direction
 255                                 This parameter must be a number between Min_Data = 0 and Max_Data = 1     */
 256
 257   uint8_t   is_stall;       /*!< Endpoint stall condition
 258                                 This parameter must be a number between Min_Data = 0 and Max_Data = 1     */
 259
 260   uint8_t   type;           /*!< Endpoint type
 261                                  This parameter can be any value of @ref USB_EP_Type                      */
 262
 263   uint16_t  pmaadress;      /*!< PMA Address
 264                                  This parameter can be any value between Min_addr = 0 and Max_addr = 1K   */
 265
 266   uint16_t  pmaaddr0;       /*!< PMA Address0
 267                                  This parameter can be any value between Min_addr = 0 and Max_addr = 1K   */
 268
 269   uint16_t  pmaaddr1;        /*!< PMA Address1
 270                                  This parameter can be any value between Min_addr = 0 and Max_addr = 1K   */
 271
 272   uint8_t   doublebuffer;    /*!< Double buffer enable
 273                                  This parameter can be 0 or 1                                             */
 274
 275   uint16_t  tx_fifo_num;    /*!< This parameter is not required by USB Device FS peripheral, it is used
 276                                  only by USB OTG FS peripheral
 277                                  This parameter is added to ensure compatibility across USB peripherals   */
 278
 279   uint32_t  maxpacket;      /*!< Endpoint Max packet size
 280                                  This parameter must be a number between Min_Data = 0 and Max_Data = 64KB */
 281
 282   uint8_t   *xfer_buff;     /*!< Pointer to transfer buffer                                               */
 283
 284   uint32_t  xfer_len;       /*!< Current transfer length                                                  */
 285
 286   uint32_t  xfer_count;     /*!< Partial transfer length in case of multi packet transfer                 */
 287
 288 } USB_EPTypeDef;
 289 #endif /* USB */
 290 /**
 291   * @}
 292   */
 293
 294 /* Exported constants --------------------------------------------------------*/
 295 /** @defgroup USB_LL_Exported_Constants USB Low Layer Exported Constants
 296   * @{
 297   */
 298 #if defined (USB_OTG_FS)
 299 /** @defgroup USB_LL_Core_Mode USB Low Layer Core Mode
 300   * @{
 301   */
 302 #define USB_OTG_MODE_DEVICE                    0
 303 #define USB_OTG_MODE_HOST                      1
 304 #define USB_OTG_MODE_DRD                       2
 305 /**
 306   * @}
 307   */
 308
 309 /** @defgroup USB_LL_Core_Speed USB Low Layer Core Speed
 310   * @{
 311   */
 312 #define USB_OTG_SPEED_LOW                      2
 313 #define USB_OTG_SPEED_FULL                     3
 314
 315 /**
 316   * @}
 317   */
 318
 319 /** @defgroup USB_LL_Core_PHY USB Low Layer Core PHY
 320   * @{
 321   */
 322 #define USB_OTG_ULPI_PHY                       1
 323 #define USB_OTG_EMBEDDED_PHY                   2
 324 /**
 325   * @}
 326   */
 327
 328 /** @defgroup USB_LL_Core_MPS USB Low Layer Core MPS
 329   * @{
 330   */
 331 #define USB_OTG_FS_MAX_PACKET_SIZE             64
 332 #define USB_OTG_MAX_EP0_SIZE                   64
 333 /**
 334   * @}
 335   */
 336
 337 /** @defgroup USB_LL_Core_PHY_Frequency USB Low Layer Core PHY Frequency
 338   * @{
 339   */
 340 #define DSTS_ENUMSPD_FS_PHY_30MHZ_OR_60MHZ     (1 << 1)
 341 #define DSTS_ENUMSPD_LS_PHY_6MHZ               (2 << 1)
 342 #define DSTS_ENUMSPD_FS_PHY_48MHZ              (3 << 1)
 343 /**
 344   * @}
 345   */
 346
 347 /** @defgroup USB_LL_CORE_Frame_Interval USB Low Layer Core Frame Interval
 348   * @{
 349   */
 350 #define DCFG_FRAME_INTERVAL_80                 0
 351 #define DCFG_FRAME_INTERVAL_85                 1
 352 #define DCFG_FRAME_INTERVAL_90                 2
 353 #define DCFG_FRAME_INTERVAL_95                 3
 354 /**
 355   * @}
 356   */
 357
 358 /** @defgroup USB_LL_EP0_MPS USB Low Layer EP0 MPS
 359   * @{
 360   */
 361 #define DEP0CTL_MPS_64                         0
 362 #define DEP0CTL_MPS_32                         1
 363 #define DEP0CTL_MPS_16                         2
 364 #define DEP0CTL_MPS_8                          3
 365 /**
 366   * @}
 367   */
 368
 369 /** @defgroup USB_LL_EP_Speed USB Low Layer EP Speed
 370   * @{
 371   */
 372 #define EP_SPEED_LOW                           0
 373 #define EP_SPEED_FULL                          1
 374 #define EP_SPEED_HIGH                          2
 375 /**
 376   * @}
 377   */
 378
 379 /** @defgroup USB_LL_EP_Type USB Low Layer EP Type
 380   * @{
 381   */
 382 #define EP_TYPE_CTRL                           0
 383 #define EP_TYPE_ISOC                           1
 384 #define EP_TYPE_BULK                           2
 385 #define EP_TYPE_INTR                           3
 386 #define EP_TYPE_MSK                            3
 387 /**
 388   * @}
 389   */
 390
 391 /** @defgroup USB_LL_STS_Defines USB Low Layer STS Defines
 392   * @{
 393   */
 394 #define STS_GOUT_NAK                           1
 395 #define STS_DATA_UPDT                          2
 396 #define STS_XFER_COMP                          3
 397 #define STS_SETUP_COMP                         4
 398 #define STS_SETUP_UPDT                         6
 399 /**
 400   * @}
 401   */
 402
 403 /** @defgroup USB_LL_HCFG_SPEED_Defines USB Low Layer HCFG Speed Defines
 404   * @{
 405   */
 406 #define HCFG_30_60_MHZ                         0
 407 #define HCFG_48_MHZ                            1
 408 #define HCFG_6_MHZ                             2
 409 /**
 410   * @}
 411   */
 412
 413 /** @defgroup USB_LL_HPRT0_PRTSPD_SPEED_Defines USB Low Layer HPRT0 PRTSPD Speed Defines
 414   * @{
 415   */
 416 #define HPRT0_PRTSPD_HIGH_SPEED                0
 417 #define HPRT0_PRTSPD_FULL_SPEED                1
 418 #define HPRT0_PRTSPD_LOW_SPEED                 2
 419 /**
 420   * @}
 421   */
 422
 423 #define HCCHAR_CTRL                            0
 424 #define HCCHAR_ISOC                            1
 425 #define HCCHAR_BULK                            2
 426 #define HCCHAR_INTR                            3
 427
 428 #define HC_PID_DATA0                           0
 429 #define HC_PID_DATA2                           1
 430 #define HC_PID_DATA1                           2
 431 #define HC_PID_SETUP                           3
 432
 433 #define GRXSTS_PKTSTS_IN                       2
 434 #define GRXSTS_PKTSTS_IN_XFER_COMP             3
 435 #define GRXSTS_PKTSTS_DATA_TOGGLE_ERR          5
 436 #define GRXSTS_PKTSTS_CH_HALTED                7
 437
 438 #define USBx_PCGCCTL                           *(__IO uint32_t *)((uint32_t)USBx + USB_OTG_PCGCCTL_BASE)
 439 #define USBx_HPRT0                             *(__IO uint32_t *)((uint32_t)USBx + USB_OTG_HOST_PORT_BASE)
 440
 441 #define USBx_DEVICE                            ((USB_OTG_DeviceTypeDef *)((uint32_t )USBx + USB_OTG_DEVICE_BASE))
 442 #define USBx_INEP(i)                           ((USB_OTG_INEndpointTypeDef *)((uint32_t)USBx + USB_OTG_IN_ENDPOINT_BASE + (i)*USB_OTG_EP_REG_SIZE))
 443 #define USBx_OUTEP(i)                          ((USB_OTG_OUTEndpointTypeDef *)((uint32_t)USBx + USB_OTG_OUT_ENDPOINT_BASE + (i)*USB_OTG_EP_REG_SIZE))
 444 #define USBx_DFIFO(i)                          *(__IO uint32_t *)((uint32_t)USBx + USB_OTG_FIFO_BASE + (i) * USB_OTG_FIFO_SIZE)
 445
 446 #define USBx_HOST                              ((USB_OTG_HostTypeDef *)((uint32_t )USBx + USB_OTG_HOST_BASE))
 447 #define USBx_HC(i)                             ((USB_OTG_HostChannelTypeDef *)((uint32_t)USBx + USB_OTG_HOST_CHANNEL_BASE + (i)*USB_OTG_HOST_CHANNEL_SIZE))
 448 #endif /* USB_OTG_FS */
 449
 450 #if defined (USB)
 451 /** @defgroup USB_LL_EP0_MPS USB Low Layer EP0 MPS
 452   * @{
 453   */
 454 #define DEP0CTL_MPS_64                         0
 455 #define DEP0CTL_MPS_32                         1
 456 #define DEP0CTL_MPS_16                         2
 457 #define DEP0CTL_MPS_8                          3
 458 /**
 459   * @}
 460   */
 461
 462 /** @defgroup USB_LL_EP_Type USB Low Layer EP Type
 463   * @{
 464   */
 465 #define EP_TYPE_CTRL                           0
 466 #define EP_TYPE_ISOC                           1
 467 #define EP_TYPE_BULK                           2
 468 #define EP_TYPE_INTR                           3
 469 #define EP_TYPE_MSK                            3
 470 /**
 471   * @}
 472   */
 473
 474 #define BTABLE_ADDRESS                         (0x000)
 475 #endif /* USB */
 476 /**
 477   * @}
 478   */
 479
 480 /* Exported macros -----------------------------------------------------------*/
 481 /** @defgroup USB_LL_Exported_Macros USB Low Layer Exported Macros
 482   * @{
 483   */
 484 #if defined (USB_OTG_FS)
 485 #define USB_MASK_INTERRUPT(__INSTANCE__, __INTERRUPT__)     ((__INSTANCE__)->GINTMSK &= ~(__INTERRUPT__))
 486 #define USB_UNMASK_INTERRUPT(__INSTANCE__, __INTERRUPT__)   ((__INSTANCE__)->GINTMSK |= (__INTERRUPT__))
 487
 488 #define CLEAR_IN_EP_INTR(__EPNUM__, __INTERRUPT__)          (USBx_INEP(__EPNUM__)->DIEPINT = (__INTERRUPT__))
 489 #define CLEAR_OUT_EP_INTR(__EPNUM__, __INTERRUPT__)         (USBx_OUTEP(__EPNUM__)->DOEPINT = (__INTERRUPT__))
 490 #endif /* USB_OTG_FS */
 491 /**
 492   * @}
 493   */
 494
 495 /* Exported functions --------------------------------------------------------*/
 496 /** @addtogroup USB_LL_Exported_Functions USB Low Layer Exported Functions
 497   * @{
 498   */
 499 /** @addtogroup USB_LL_Exported_Functions_Group1 Peripheral Control functions
 500   * @{
 501   */
 502 #if defined (USB_OTG_FS)
 503 HAL_StatusTypeDef USB_CoreInit(USB_OTG_GlobalTypeDef *USBx, USB_OTG_CfgTypeDef Init);
 504 HAL_StatusTypeDef USB_DevInit(USB_OTG_GlobalTypeDef *USBx, USB_OTG_CfgTypeDef Init);
 505 HAL_StatusTypeDef USB_EnableGlobalInt(USB_OTG_GlobalTypeDef *USBx);
 506 HAL_StatusTypeDef USB_DisableGlobalInt(USB_OTG_GlobalTypeDef *USBx);
 507 HAL_StatusTypeDef USB_SetCurrentMode(USB_OTG_GlobalTypeDef *USBx , USB_ModeTypeDef mode);
 508 HAL_StatusTypeDef USB_SetDevSpeed(USB_OTG_GlobalTypeDef *USBx , uint8_t speed);
 509 HAL_StatusTypeDef USB_FlushRxFifo (USB_OTG_GlobalTypeDef *USBx);
 510 HAL_StatusTypeDef USB_FlushTxFifo (USB_OTG_GlobalTypeDef *USBx, uint32_t num );
 511 HAL_StatusTypeDef USB_ActivateEndpoint(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep);
 512 HAL_StatusTypeDef USB_DeactivateEndpoint(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep);
 513 HAL_StatusTypeDef USB_EPStartXfer(USB_OTG_GlobalTypeDef *USBx , USB_OTG_EPTypeDef *ep);
 514 HAL_StatusTypeDef USB_EP0StartXfer(USB_OTG_GlobalTypeDef *USBx , USB_OTG_EPTypeDef *ep);
 515 HAL_StatusTypeDef USB_WritePacket(USB_OTG_GlobalTypeDef *USBx, uint8_t *src, uint8_t ch_ep_num, uint16_t len);
 516 void *            USB_ReadPacket(USB_OTG_GlobalTypeDef *USBx, uint8_t *dest, uint16_t len);
 517 HAL_StatusTypeDef USB_EPSetStall(USB_OTG_GlobalTypeDef *USBx , USB_OTG_EPTypeDef *ep);
 518 HAL_StatusTypeDef USB_EPClearStall(USB_OTG_GlobalTypeDef *USBx , USB_OTG_EPTypeDef *ep);
 519 HAL_StatusTypeDef USB_SetDevAddress (USB_OTG_GlobalTypeDef *USBx, uint8_t address);
 520 HAL_StatusTypeDef USB_DevConnect (USB_OTG_GlobalTypeDef *USBx);
 521 HAL_StatusTypeDef USB_DevDisconnect (USB_OTG_GlobalTypeDef *USBx);
 522 HAL_StatusTypeDef USB_StopDevice(USB_OTG_GlobalTypeDef *USBx);
 523 HAL_StatusTypeDef USB_ActivateSetup (USB_OTG_GlobalTypeDef *USBx);
 524 HAL_StatusTypeDef USB_EP0_OutStart(USB_OTG_GlobalTypeDef *USBx, uint8_t *psetup);
 525 uint8_t           USB_GetDevSpeed(USB_OTG_GlobalTypeDef *USBx);
 526 uint32_t          USB_GetMode(USB_OTG_GlobalTypeDef *USBx);
 527 uint32_t          USB_ReadInterrupts (USB_OTG_GlobalTypeDef *USBx);
 528 uint32_t          USB_ReadDevAllOutEpInterrupt (USB_OTG_GlobalTypeDef *USBx);
 529 uint32_t          USB_ReadDevOutEPInterrupt (USB_OTG_GlobalTypeDef *USBx , uint8_t epnum);
 530 uint32_t          USB_ReadDevAllInEpInterrupt (USB_OTG_GlobalTypeDef *USBx);
 531 uint32_t          USB_ReadDevInEPInterrupt (USB_OTG_GlobalTypeDef *USBx , uint8_t epnum);
 532 void              USB_ClearInterrupts (USB_OTG_GlobalTypeDef *USBx, uint32_t interrupt);
 533
 534 HAL_StatusTypeDef USB_HostInit (USB_OTG_GlobalTypeDef *USBx, USB_OTG_CfgTypeDef cfg);
 535 HAL_StatusTypeDef USB_InitFSLSPClkSel(USB_OTG_GlobalTypeDef *USBx , uint8_t freq);
 536 HAL_StatusTypeDef USB_ResetPort(USB_OTG_GlobalTypeDef *USBx);
 537 HAL_StatusTypeDef USB_DriveVbus (USB_OTG_GlobalTypeDef *USBx, uint8_t state);
 538 uint32_t          USB_GetHostSpeed (USB_OTG_GlobalTypeDef *USBx);
 539 uint32_t          USB_GetCurrentFrame (USB_OTG_GlobalTypeDef *USBx);
 540 HAL_StatusTypeDef USB_HC_Init(USB_OTG_GlobalTypeDef *USBx,
 541                               uint8_t ch_num,
 542                               uint8_t epnum,
 543                               uint8_t dev_address,
 544                               uint8_t speed,
 545                               uint8_t ep_type,
 546                               uint16_t mps);
 547 HAL_StatusTypeDef USB_HC_StartXfer(USB_OTG_GlobalTypeDef *USBx, USB_OTG_HCTypeDef *hc);
 548 uint32_t          USB_HC_ReadInterrupt (USB_OTG_GlobalTypeDef *USBx);
 549 HAL_StatusTypeDef USB_HC_Halt(USB_OTG_GlobalTypeDef *USBx , uint8_t hc_num);
 550 HAL_StatusTypeDef USB_DoPing(USB_OTG_GlobalTypeDef *USBx , uint8_t ch_num);
 551 HAL_StatusTypeDef USB_StopHost(USB_OTG_GlobalTypeDef *USBx);
 552 HAL_StatusTypeDef USB_ActivateRemoteWakeup(USB_OTG_GlobalTypeDef *USBx);
 553 HAL_StatusTypeDef USB_DeActivateRemoteWakeup(USB_OTG_GlobalTypeDef *USBx);
 554 #endif /* USB_OTG_FS */
 555
 556 #if defined (USB)
 557 HAL_StatusTypeDef USB_CoreInit(USB_TypeDef *USBx, USB_CfgTypeDef Init);
 558 HAL_StatusTypeDef USB_DevInit(USB_TypeDef *USBx, USB_CfgTypeDef Init);
 559 HAL_StatusTypeDef USB_EnableGlobalInt(USB_TypeDef *USBx);
 560 HAL_StatusTypeDef USB_DisableGlobalInt(USB_TypeDef *USBx);
 561 HAL_StatusTypeDef USB_SetCurrentMode(USB_TypeDef *USBx , USB_ModeTypeDef mode);
 562 HAL_StatusTypeDef USB_SetDevSpeed(USB_TypeDef *USBx , uint8_t speed);
 563 HAL_StatusTypeDef USB_FlushRxFifo (USB_TypeDef *USBx);
 564 HAL_StatusTypeDef USB_FlushTxFifo (USB_TypeDef *USBx, uint32_t num );
 565 HAL_StatusTypeDef USB_ActivateEndpoint(USB_TypeDef *USBx, USB_EPTypeDef *ep);
 566 HAL_StatusTypeDef USB_DeactivateEndpoint(USB_TypeDef *USBx, USB_EPTypeDef *ep);
 567 HAL_StatusTypeDef USB_EPStartXfer(USB_TypeDef *USBx , USB_EPTypeDef *ep);
 568 HAL_StatusTypeDef USB_WritePacket(USB_TypeDef *USBx, uint8_t *src, uint8_t ch_ep_num, uint16_t len);
 569 void *            USB_ReadPacket(USB_TypeDef *USBx, uint8_t *dest, uint16_t len);
 570 HAL_StatusTypeDef USB_EPSetStall(USB_TypeDef *USBx , USB_EPTypeDef *ep);
 571 HAL_StatusTypeDef USB_EPClearStall(USB_TypeDef *USBx , USB_EPTypeDef *ep);
 572 HAL_StatusTypeDef USB_SetDevAddress (USB_TypeDef *USBx, uint8_t address);
 573 HAL_StatusTypeDef USB_DevConnect (USB_TypeDef *USBx);
 574 HAL_StatusTypeDef USB_DevDisconnect (USB_TypeDef *USBx);
 575 HAL_StatusTypeDef USB_StopDevice(USB_TypeDef *USBx);
 576 HAL_StatusTypeDef USB_EP0_OutStart(USB_TypeDef *USBx, uint8_t *psetup);
 577 uint32_t          USB_ReadInterrupts (USB_TypeDef *USBx);
 578 uint32_t          USB_ReadDevAllOutEpInterrupt (USB_TypeDef *USBx);
 579 uint32_t          USB_ReadDevOutEPInterrupt (USB_TypeDef *USBx , uint8_t epnum);
 580 uint32_t          USB_ReadDevAllInEpInterrupt (USB_TypeDef *USBx);
 581 uint32_t          USB_ReadDevInEPInterrupt (USB_TypeDef *USBx , uint8_t epnum);
 582 void              USB_ClearInterrupts (USB_TypeDef *USBx, uint32_t interrupt);
 583
 584 HAL_StatusTypeDef USB_ActivateRemoteWakeup(USB_TypeDef *USBx);
 585 HAL_StatusTypeDef USB_DeActivateRemoteWakeup(USB_TypeDef *USBx);
 586 void USB_WritePMA(USB_TypeDef  *USBx, uint8_t *pbUsrBuf, uint16_t wPMABufAddr, uint16_t wNBytes);
 587 void USB_ReadPMA(USB_TypeDef  *USBx, uint8_t *pbUsrBuf, uint16_t wPMABufAddr, uint16_t wNBytes);
 588 #endif /* USB */
 589 /**
 590   * @}
 591   */
 592 /**
 593   * @}
 594   */
 595
 596 /**
 597   * @}
 598   */
 599
 600 /**
 601   * @}
 602   */
 603
 604 #endif /* STM32F102x6 || STM32F102xB || */
 605        /* STM32F103x6 || STM32F103xB || */
 606        /* STM32F103xE || STM32F103xG || */
 607        /* STM32F105xC || STM32F107xC    */
 608
 609 #ifdef __cplusplus
 610 }
 611 #endif
 612
 613
 614 #endif /* __STM32F1xx_LL_USB_H */
 615
 616 /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/