tool/mbed/mbed-sdk/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32L0/TARGET_DISCO_L053C8/stm32l0xx.h

   1 /**
   2   ******************************************************************************
   3   * @file    stm32l0xx.h
   4   * @author  MCD Application Team
   5   * @version V1.2.0
   6   * @date    06-February-2015
   7   * @brief   CMSIS Cortex-M0+ Device Peripheral Access Layer Header File.
   8   *          This file contains all the peripheral register's definitions, bits
   9   *          definitions and memory mapping for STM32L0xx devices.
  10   *
  11   *          The file is the unique include file that the application programmer
  12   *          is using in the C source code, usually in main.c. This file contains:
  13   *           - Configuration section that allows to select:
  14   *              - The device used in the target application
  15   *              - To use or not the peripheral’s drivers in application code(i.e.
  16   *                code will be based on direct access to peripheral’s registers
  17   *                rather than drivers API), this option is controlled by
  18   *                "#define USE_HAL_DRIVER"
  19   *
  20   ******************************************************************************
  21   * @attention
  22   *
  23   * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
  24   *
  25   * Redistribution and use in source and binary forms, with or without modification,
  26   * are permitted provided that the following conditions are met:
  27   *   1. Redistributions of source code must retain the above copyright notice,
  28   *      this list of conditions and the following disclaimer.
  29   *   2. Redistributions in binary form must reproduce the above copyright notice,
  30   *      this list of conditions and the following disclaimer in the documentation
  31   *      and/or other materials provided with the distribution.
  32   *   3. Neither the name of STMicroelectronics nor the names of its contributors
  33   *      may be used to endorse or promote products derived from this software
  34   *      without specific prior written permission.
  35   *
  36   * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
  37   * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
  38   * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
  39   * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
  40   * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  41   * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
  42   * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
  43   * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
  44   * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
  45   * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  46   *
  47   ******************************************************************************
  48   */
  49
  50 /** @addtogroup CMSIS
  51   * @{
  52   */
  53
  54 /** @addtogroup stm32l0xx
  55   * @{
  56   */
  57
  58 #ifndef __STM32L0xx_H
  59 #define __STM32L0xx_H
  60
  61 #ifdef __cplusplus
  62  extern "C" {
  63 #endif /* __cplusplus */
  64
  65 /** @addtogroup Library_configuration_section
  66   * @{
  67   */
  68
  69 /**
  70   * @brief STM32 Family
  71   */
  72 #if !defined (STM32L0)
  73 #define STM32L0
  74 #endif /* STM32L0 */
  75
  76 /* Uncomment the line below according to the target STM32 device used in your
  77    application
  78   */
  79
  80 #if !defined (STM32L051xx) && !defined (STM32L052xx) && !defined (STM32L053xx) && !defined (STM32L061xx) && !defined (STM32L062xx) && !defined (STM32L063xx) \
  81  && !defined (STM32L071xx) && !defined (STM32L072xx) && !defined (STM32L073xx) && !defined (STM32L081xx) && !defined (STM32L082xx) && !defined (STM32L083xx)
  82   /* #define STM32L051xx */   /*!< STM32L051K8, STM32L051C6, STM32L051C8, STM32L051R6, STM32L051R8 Devices */
  83   /* #define STM32L052xx */   /*!< STM32L052K6, STM32L052K8, STM32L052C6, STM32L052C8, STM32L052R6, STM32L052R8 Devices */
  84 #define STM32L053xx           /*!< STM32L053C6, STM32L053C8, STM32L053R6, STM32L053R8 Devices */
  85   /* #define STM32L061xx */   /*!< */
  86   /* #define STM32L062xx */   /*!< STM32L062K8 */
  87   /* #define STM32L063xx */   /*!< STM32L063C8, STM32L063R8 */
  88   /* #define STM32L071xx */   /*!< */
  89   /* #define STM32L072xx */   /*!< */
  90   /* #define STM32L073xx */   /*!< STM32L073V8, STM32L073VB, STM32L073RB, STM32L073VZ, STM32L073RZ Devices */
  91   /* #define STM32L081xx */   /*!< */
  92   /* #define STM32L082xx */   /*!< */
  93   /* #define STM32L083xx */   /*!< */
  94 #endif
  95
  96 /*  Tip: To avoid modifying this file each time you need to switch between these
  97         devices, you can define the device in your toolchain compiler preprocessor.
  98   */
  99 #if !defined  (USE_HAL_DRIVER)
 100 /**
 101  * @brief Comment the line below if you will not use the peripherals drivers.
 102    In this case, these drivers will not be included and the application code will
 103    be based on direct access to peripherals registers
 104    */
 105 #define USE_HAL_DRIVER
 106 #endif /* USE_HAL_DRIVER */
 107
 108 /**
 109   * @brief CMSIS Device version number V1.2.0
 110   */
 111 #define __STM32L0xx_CMSIS_DEVICE_VERSION_MAIN   (0x01) /*!< [31:24] main version */
 112 #define __STM32L0xx_CMSIS_DEVICE_VERSION_SUB1   (0x02) /*!< [23:16] sub1 version */
 113 #define __STM32L0xx_CMSIS_DEVICE_VERSION_SUB2   (0x00) /*!< [15:8]  sub2 version */
 114 #define __STM32L0xx_CMSIS_DEVICE_VERSION_RC     (0x00) /*!< [7:0]  release candidate */
 115 #define __STM32L0xx_CMSIS_DEVICE_VERSION        ((__CMSIS_DEVICE_VERSION_MAIN     << 24)\
 116                                       |(__CMSIS_DEVICE_HAL_VERSION_SUB1 << 16)\
 117                                       |(__CMSIS_DEVICE_HAL_VERSION_SUB2 << 8 )\
 118                                       |(__CMSIS_DEVICE_HAL_VERSION_RC))
 119
 120 /**
 121   * @}
 122   */
 123
 124 /** @addtogroup Device_Included
 125   * @{
 126   */
 127
 128 #if defined(STM32L031xx)
 129   #include "stm32l031xx.h"
 130 #elif defined(STM32L041xx)
 131   #include "stm32l041xx.h"
 132 #elif defined(STM32L051xx)
 133   #include "stm32l051xx.h"
 134 #elif defined(STM32L052xx)
 135   #include "stm32l052xx.h"
 136 #elif defined(STM32L053xx)
 137   #include "stm32l053xx.h"
 138 #elif defined(STM32L062xx)
 139   #include "stm32l062xx.h"
 140 #elif defined(STM32L063xx)
 141   #include "stm32l063xx.h"
 142 #elif defined(STM32L061xx)
 143   #include "stm32l061xx.h"
 144 #elif defined(STM32L071xx)
 145   #include "stm32l071xx.h"
 146 #elif defined(STM32L072xx)
 147   #include "stm32l072xx.h"
 148 #elif defined(STM32L073xx)
 149   #include "stm32l073xx.h"
 150 #elif defined(STM32L082xx)
 151   #include "stm32l082xx.h"
 152 #elif defined(STM32L083xx)
 153   #include "stm32l083xx.h"
 154 #elif defined(STM32L081xx)
 155   #include "stm32l081xx.h"
 156 #else
 157  #error "Please select first the target STM32L0xx device used in your application (in stm32l0xx.h file)"
 158 #endif
 159
 160 /**
 161   * @}
 162   */
 163
 164 /** @addtogroup Exported_types
 165   * @{
 166   */
 167 typedef enum
 168 {
 169   RESET = 0,
 170   SET = !RESET
 171 } FlagStatus, ITStatus;
 172
 173 typedef enum
 174 {
 175   DISABLE = 0,
 176   ENABLE = !DISABLE
 177 } FunctionalState;
 178 #define IS_FUNCTIONAL_STATE(STATE) (((STATE) == DISABLE) || ((STATE) == ENABLE))
 179
 180 typedef enum
 181 {
 182   ERROR = 0,
 183   SUCCESS = !ERROR
 184 } ErrorStatus;
 185
 186 /**
 187   * @}
 188   */
 189
 190
 191 /** @addtogroup Exported_macro
 192   * @{
 193   */
 194 #define SET_BIT(REG, BIT)     ((REG) |= (BIT))
 195
 196 #define CLEAR_BIT(REG, BIT)   ((REG) &= ~(BIT))
 197
 198 #define READ_BIT(REG, BIT)    ((REG) & (BIT))
 199
 200 #define CLEAR_REG(REG)        ((REG) = (0x0))
 201
 202 #define WRITE_REG(REG, VAL)   ((REG) = (VAL))
 203
 204 #define READ_REG(REG)         ((REG))
 205
 206 #define MODIFY_REG(REG, CLEARMASK, SETMASK)  WRITE_REG((REG), (((READ_REG(REG)) & (~(CLEARMASK))) | (SETMASK)))
 207
 208
 209 /**
 210   * @}
 211   */
 212
 213 #if defined (USE_HAL_DRIVER)
 214  #include "stm32l0xx_hal.h"
 215 #endif /* USE_HAL_DRIVER */
 216
 217 #ifdef __cplusplus
 218 }
 219 #endif /* __cplusplus */
 220
 221 #endif /* __STM32L0xx_H */
 222 /**
 223   * @}
 224   */
 225
 226 /**
 227   * @}
 228   */
 229
 230
 231
 232
 233 /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/