tool/mbed/mbed-sdk/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32L1/stm32l1xx_hal_conf.h

   1 /**
   2   ******************************************************************************
   3   * @file    stm32l1xx_hal_conf_template.h
   4   * @author  MCD Application Team
   5   * @version V1.0.0
   6   * @date    5-September-2014
   7   * @brief   HAL configuration template file.
   8   *          This file should be copied to the application folder and renamed
   9   *          to stm32l1xx_hal_conf.h.
  10   ******************************************************************************
  11   * @attention
  12   *
  13   * <h2><center>&copy; COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
  14   *
  15   * Redistribution and use in source and binary forms, with or without modification,
  16   * are permitted provided that the following conditions are met:
  17   *   1. Redistributions of source code must retain the above copyright notice,
  18   *      this list of conditions and the following disclaimer.
  19   *   2. Redistributions in binary form must reproduce the above copyright notice,
  20   *      this list of conditions and the following disclaimer in the documentation
  21   *      and/or other materials provided with the distribution.
  22   *   3. Neither the name of STMicroelectronics nor the names of its contributors
  23   *      may be used to endorse or promote products derived from this software
  24   *      without specific prior written permission.
  25   *
  26   * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
  27   * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
  28   * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
  29   * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
  30   * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  31   * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
  32   * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
  33   * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
  34   * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
  35   * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  36   *
  37   ******************************************************************************
  38   */
  39
  40 /* Define to prevent recursive inclusion -------------------------------------*/
  41 #ifndef __STM32L1xx_HAL_CONF_H
  42 #define __STM32L1xx_HAL_CONF_H
  43
  44 #ifdef __cplusplus
  45  extern "C" {
  46 #endif
  47
  48 /* Exported types ------------------------------------------------------------*/
  49 /* Exported constants --------------------------------------------------------*/
  50
  51 /* ########################## Module Selection ############################## */
  52 /**
  53   * @brief This is the list of modules to be used in the HAL driver
  54   */
  55 #define HAL_MODULE_ENABLED
  56 #define HAL_ADC_MODULE_ENABLED
  57 #define HAL_COMP_MODULE_ENABLED
  58 #define HAL_CORTEX_MODULE_ENABLED
  59 #define HAL_CRC_MODULE_ENABLED
  60 #define HAL_CRYP_MODULE_ENABLED
  61 #define HAL_DAC_MODULE_ENABLED
  62 #define HAL_DMA_MODULE_ENABLED
  63 #define HAL_FLASH_MODULE_ENABLED
  64 #define HAL_GPIO_MODULE_ENABLED
  65 #define HAL_I2C_MODULE_ENABLED
  66 #define HAL_I2S_MODULE_ENABLED
  67 #define HAL_IRDA_MODULE_ENABLED
  68 #define HAL_IWDG_MODULE_ENABLED
  69 #define HAL_LCD_MODULE_ENABLED
  70 #define HAL_NOR_MODULE_ENABLED
  71 #define HAL_OPAMP_MODULE_ENABLED
  72 #define HAL_PCD_MODULE_ENABLED
  73 #define HAL_PWR_MODULE_ENABLED
  74 #define HAL_RCC_MODULE_ENABLED
  75 #define HAL_RTC_MODULE_ENABLED
  76 #define HAL_SD_MODULE_ENABLED
  77 #define HAL_SMARTCARD_MODULE_ENABLED
  78 #define HAL_SPI_MODULE_ENABLED
  79 #define HAL_SRAM_MODULE_ENABLED
  80 #define HAL_TIM_MODULE_ENABLED
  81 #define HAL_UART_MODULE_ENABLED
  82 #define HAL_USART_MODULE_ENABLED
  83 #define HAL_WWDG_MODULE_ENABLED
  84
  85 /* ########################## Oscillator Values adaptation ####################*/
  86 /**
  87   * @brief Adjust the value of External High Speed oscillator (HSE) used in your application.
  88   *        This value is used by the RCC HAL module to compute the system frequency
  89   *        (when HSE is used as system clock source, directly or through the PLL).
  90   */
  91 #if !defined  (HSE_VALUE)
  92   #define HSE_VALUE    ((uint32_t)8000000) /*!< Value of the External oscillator in Hz */
  93 #endif /* HSE_VALUE */
  94
  95 #if !defined  (HSE_STARTUP_TIMEOUT)
  96   #define HSE_STARTUP_TIMEOUT    ((uint32_t)500)   /*!< Time out for HSE start up, in ms */
  97 #endif /* HSE_STARTUP_TIMEOUT */
  98
  99 /**
 100   * @brief Internal Multiple Speed oscillator (MSI) default value.
 101   *        This value is the default MSI range value after Reset.
 102   */
 103 #if !defined  (MSI_VALUE)
 104   #define MSI_VALUE    ((uint32_t)2097000) /*!< Value of the Internal oscillator in Hz*/
 105 #endif /* MSI_VALUE */
 106 /**
 107   * @brief Internal High Speed oscillator (HSI) value.
 108   *        This value is used by the RCC HAL module to compute the system frequency
 109   *        (when HSI is used as system clock source, directly or through the PLL).
 110   */
 111 #if !defined  (HSI_VALUE)
 112   #define HSI_VALUE    ((uint32_t)16000000) /*!< Value of the Internal oscillator in Hz*/
 113 #endif /* HSI_VALUE */
 114
 115 /**
 116   * @brief External Low Speed oscillator (LSE) value.
 117   *        This value is used by the UART, RTC HAL module to compute the system frequency
 118   */
 119 #if !defined  (LSE_VALUE)
 120   #define LSE_VALUE    ((uint32_t)32768) /*!< Value of the External oscillator in Hz*/
 121 #endif /* LSE_VALUE */
 122
 123
 124 #if !defined  (LSE_STARTUP_TIMEOUT)
 125   #define LSE_STARTUP_TIMEOUT    ((uint32_t)5000)   /*!< Time out for LSE start up, in ms */
 126 #endif /* HSE_STARTUP_TIMEOUT */
 127
 128
 129 /* Tip: To avoid modifying this file each time you need to use different HSE,
 130    ===  you can define the HSE value in your toolchain compiler preprocessor. */
 131
 132 /* ########################### System Configuration ######################### */
 133 /**
 134   * @brief This is the HAL system configuration section
 135   */
 136 #define  VDD_VALUE                    ((uint32_t)3300) /*!< Value of VDD in mv */
 137 #define  TICK_INT_PRIORITY            ((uint32_t)0x000F)    /*!< tick interrupt priority */
 138 #define  USE_RTOS                     0
 139 #define  PREFETCH_ENABLE              1
 140 #define  INSTRUCTION_CACHE_ENABLE     0
 141 #define  DATA_CACHE_ENABLE            0
 142
 143 /* ########################## Assert Selection ############################## */
 144 /**
 145   * @brief Uncomment the line below to expanse the "assert_param" macro in the
 146   *        HAL drivers code
 147   */
 148 /*#define USE_FULL_ASSERT    1*/
 149
 150 /* Includes ------------------------------------------------------------------*/
 151 /**
 152   * @brief Include module's header file
 153   */
 154
 155 #ifdef HAL_RCC_MODULE_ENABLED
 156  #include "stm32l1xx_hal_rcc.h"
 157 #endif /* HAL_RCC_MODULE_ENABLED */
 158
 159 #ifdef HAL_GPIO_MODULE_ENABLED
 160  #include "stm32l1xx_hal_gpio.h"
 161 #endif /* HAL_GPIO_MODULE_ENABLED */
 162
 163 #ifdef HAL_DMA_MODULE_ENABLED
 164   #include "stm32l1xx_hal_dma.h"
 165 #endif /* HAL_DMA_MODULE_ENABLED */
 166
 167 #ifdef HAL_CORTEX_MODULE_ENABLED
 168  #include "stm32l1xx_hal_cortex.h"
 169 #endif /* HAL_CORTEX_MODULE_ENABLED */
 170
 171 #ifdef HAL_ADC_MODULE_ENABLED
 172  #include "stm32l1xx_hal_adc.h"
 173 #endif /* HAL_ADC_MODULE_ENABLED */
 174
 175 #ifdef HAL_COMP_MODULE_ENABLED
 176   #include "stm32l1xx_hal_comp.h"
 177 #endif /* HAL_COMP_MODULE_ENABLED */
 178
 179 #ifdef HAL_CRC_MODULE_ENABLED
 180  #include "stm32l1xx_hal_crc.h"
 181 #endif /* HAL_CRC_MODULE_ENABLED */
 182
 183 #ifdef HAL_CRYP_MODULE_ENABLED
 184  #include "stm32l1xx_hal_cryp.h"
 185 #endif /* HAL_CRYP_MODULE_ENABLED */
 186
 187 #ifdef HAL_DAC_MODULE_ENABLED
 188  #include "stm32l1xx_hal_dac.h"
 189 #endif /* HAL_DAC_MODULE_ENABLED */
 190
 191 #ifdef HAL_FLASH_MODULE_ENABLED
 192  #include "stm32l1xx_hal_flash.h"
 193 #endif /* HAL_FLASH_MODULE_ENABLED */
 194
 195 #ifdef HAL_SRAM_MODULE_ENABLED
 196  #include "stm32l1xx_hal_sram.h"
 197 #endif /* HAL_SRAM_MODULE_ENABLED */
 198
 199 #ifdef HAL_NOR_MODULE_ENABLED
 200  #include "stm32l1xx_hal_nor.h"
 201 #endif /* HAL_NOR_MODULE_ENABLED */
 202
 203 #ifdef HAL_I2C_MODULE_ENABLED
 204  #include "stm32l1xx_hal_i2c.h"
 205 #endif /* HAL_I2C_MODULE_ENABLED */
 206
 207 #ifdef HAL_I2S_MODULE_ENABLED
 208  #include "stm32l1xx_hal_i2s.h"
 209 #endif /* HAL_I2S_MODULE_ENABLED */
 210
 211 #ifdef HAL_IWDG_MODULE_ENABLED
 212  #include "stm32l1xx_hal_iwdg.h"
 213 #endif /* HAL_IWDG_MODULE_ENABLED */
 214
 215 #ifdef HAL_LCD_MODULE_ENABLED
 216  #include "stm32l1xx_hal_lcd.h"
 217 #endif /* HAL_LCD_MODULE_ENABLED */
 218
 219 #ifdef HAL_OPAMP_MODULE_ENABLED
 220  #include "stm32l1xx_hal_opamp.h"
 221 #endif /* HAL_OPAMP_MODULE_ENABLED */
 222
 223 #ifdef HAL_PWR_MODULE_ENABLED
 224  #include "stm32l1xx_hal_pwr.h"
 225 #endif /* HAL_PWR_MODULE_ENABLED */
 226
 227 #ifdef HAL_RTC_MODULE_ENABLED
 228  #include "stm32l1xx_hal_rtc.h"
 229 #endif /* HAL_RTC_MODULE_ENABLED */
 230
 231 #ifdef HAL_SD_MODULE_ENABLED
 232  #include "stm32l1xx_hal_sd.h"
 233 #endif /* HAL_SD_MODULE_ENABLED */
 234
 235 #ifdef HAL_SPI_MODULE_ENABLED
 236  #include "stm32l1xx_hal_spi.h"
 237 #endif /* HAL_SPI_MODULE_ENABLED */
 238
 239 #ifdef HAL_TIM_MODULE_ENABLED
 240  #include "stm32l1xx_hal_tim.h"
 241 #endif /* HAL_TIM_MODULE_ENABLED */
 242
 243 #ifdef HAL_UART_MODULE_ENABLED
 244  #include "stm32l1xx_hal_uart.h"
 245 #endif /* HAL_UART_MODULE_ENABLED */
 246
 247 #ifdef HAL_USART_MODULE_ENABLED
 248  #include "stm32l1xx_hal_usart.h"
 249 #endif /* HAL_USART_MODULE_ENABLED */
 250
 251 #ifdef HAL_IRDA_MODULE_ENABLED
 252  #include "stm32l1xx_hal_irda.h"
 253 #endif /* HAL_IRDA_MODULE_ENABLED */
 254
 255 #ifdef HAL_SMARTCARD_MODULE_ENABLED
 256  #include "stm32l1xx_hal_smartcard.h"
 257 #endif /* HAL_SMARTCARD_MODULE_ENABLED */
 258
 259 #ifdef HAL_WWDG_MODULE_ENABLED
 260  #include "stm32l1xx_hal_wwdg.h"
 261 #endif /* HAL_WWDG_MODULE_ENABLED */
 262
 263 #ifdef HAL_PCD_MODULE_ENABLED
 264  #include "stm32l1xx_hal_pcd.h"
 265 #endif /* HAL_PCD_MODULE_ENABLED */
 266
 267 /* Exported macro ------------------------------------------------------------*/
 268 #ifdef  USE_FULL_ASSERT
 269 /**
 270   * @brief  The assert_param macro is used for function's parameters check.
 271   * @param  expr: If expr is false, it calls assert_failed function
 272   *         which reports the name of the source file and the source
 273   *         line number of the call that failed.
 274   *         If expr is true, it returns no value.
 275   * @retval None
 276   */
 277   #define assert_param(expr) ((expr) ? (void)0 : assert_failed((uint8_t *)__FILE__, __LINE__))
 278 /* Exported functions ------------------------------------------------------- */
 279   void assert_failed(uint8_t* file, uint32_t line);
 280 #else
 281   #define assert_param(expr) ((void)0)
 282 #endif /* USE_FULL_ASSERT */
 283
 284 #ifdef __cplusplus
 285 }
 286 #endif
 287
 288 #endif /* __STM32L1xx_HAL_CONF_H */
 289
 290
 291 /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/