tool/mbed/mbed-sdk/libraries/mbed/targets/hal/TARGET_NXP/TARGET_LPC11UXX/TARGET_MCU_LPC11U35_501/TARGET_XADOW_M0/PinNames.h

   1 /* mbed Microcontroller Library
   2  * Copyright (c) 2006-2014 ARM Limited
   3  *
   4  * Licensed under the Apache License, Version 2.0 (the "License");
   5  * you may not use this file except in compliance with the License.
   6  * You may obtain a copy of the License at
   7  *
   8  *     http://www.apache.org/licenses/LICENSE-2.0
   9  *
  10  * Unless required by applicable law or agreed to in writing, software
  11  * distributed under the License is distributed on an "AS IS" BASIS,
  12  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  13  * See the License for the specific language governing permissions and
  14  * limitations under the License.
  15  */
  16 #ifndef MBED_PINNAMES_H
  17 #define MBED_PINNAMES_H
  18
  19 #include "cmsis.h"
  20
  21 #ifdef __cplusplus
  22 extern "C" {
  23 #endif
  24
  25 typedef enum {
  26     PIN_INPUT,
  27     PIN_OUTPUT
  28 } PinDirection;
  29
  30 #define PORT_SHIFT  5
  31
  32 typedef enum {
  33     // LPC11U Pin Names
  34     P0_0 = 0,
  35     P0_1 = 1,
  36     P0_2 = 2,
  37     P0_3 = 3,
  38     P0_4 = 4,
  39     P0_5 = 5,
  40     P0_6 = 6,
  41     P0_7 = 7,
  42     P0_8 = 8,
  43     P0_9 = 9,
  44     P0_10 = 10,
  45     P0_11 = 11,
  46     P0_12 = 12,
  47     P0_13 = 13,
  48     P0_14 = 14,
  49     P0_15 = 15,
  50     P0_16 = 16,
  51     P0_17 = 17,
  52     P0_18 = 18,
  53     P0_19 = 19,
  54     P0_20 = 20,
  55     P0_21 = 21,
  56     P0_22 = 22,
  57     P0_23 = 23,
  58     P0_24 = 24,
  59     P0_25 = 25,
  60     P0_26 = 26,
  61     P0_27 = 27,
  62
  63     P1_0 = 32,
  64     P1_1 = 33,
  65     P1_2 = 34,
  66     P1_3 = 35,
  67     P1_4 = 36,
  68     P1_5 = 37,
  69     P1_6 = 38,
  70     P1_7 = 39,
  71     P1_8 = 40,
  72     P1_9 = 41,
  73     P1_10 = 42,
  74     P1_11 = 43,
  75     P1_12 = 44,
  76     P1_13 = 45,
  77     P1_14 = 46,
  78     P1_15 = 47,
  79     P1_16 = 48,
  80     P1_17 = 49,
  81     P1_18 = 50,
  82     P1_19 = 51,
  83     P1_20 = 52,
  84     P1_21 = 53,
  85     P1_22 = 54,
  86     P1_23 = 55,
  87     P1_24 = 56,
  88     P1_25 = 57,
  89     P1_26 = 58,
  90     P1_27 = 59,
  91     P1_28 = 60,
  92     P1_29 = 61,
  93
  94     P1_31 = 63,
  95
  96     // mbed DIP Pin Names
  97                     // CN1-1  (GND)
  98                     // CN1-2  (EXTPOWER)
  99                     // CN1-3  (NC)
 100     p4 = P0_0,      // CN1-4
 101     p5 = P0_9,      // CN1-5
 102     p6 = P0_8,      // CN1-6
 103     p7 = P0_10,     // CN1-7
 104     p8 = P0_7,      // CN1-8
 105     p9 = P0_19,     // CN1-9
 106     p10 = P0_18,    // CN1-10
 107     p11 = P0_21,    // CN1-11
 108     p12 = P0_22,    // CN1-12
 109     p13 = P1_15,    // CN1-13
 110     p14 = P0_6,     // CN1-14
 111     p15 = P0_11,    // CN1-15
 112     p16 = P0_12,    // CN1-16
 113     p17 = P0_13,    // CN1-17
 114     p18 = P0_14,    // CN1-18
 115     p19 = P0_15,    // CN1-19
 116     p20 = P0_16,    // CN1-20
 117
 118     p21 = P0_14,    // CN2-20
 119     p22 = P0_2,     // CN2-19
 120     p23 = P0_23,    // CN2-18
 121     p24 = P0_17,    // CN2-17
 122     p25 = P0_20,    // CN2-16
 123     p26 = P1_15,    // CN2-15
 124     p27 = P0_4,     // CN2-14
 125     p28 = P0_5,     // CN2-13
 126     p29 = P1_19,    // CN2-12
 127     p30 = P0_1,     // CN2-11
 128                     // CN2-10 (D+USB)
 129                     // CN2-9  (D-USB)
 130     p33 = P0_3,     // CN2-8  (USB-VBUS)
 131                     // CN2-7  (NC)
 132                     // CN2-6  (NC)
 133                     // CN2-5  (NC)
 134                     // CN2-4  (NC)
 135                     // CN2-3  (NC)
 136                     // CN2-2  (VDD)
 137                     // CN2-1  (VDD)
 138
 139     // Other mbed Pin Names
 140     LED1 = P0_20,
 141     LED2 = P0_23,
 142     LED3 = P0_20,
 143     LED4 = P0_23,
 144
 145     UART_TX = P0_19,
 146     UART_RX = P0_18,
 147
 148     I2C_SCL = P0_4,
 149     I2C_SDA = P0_5,
 150
 151     // Not connected
 152     NC = (int)0xFFFFFFFF,
 153
 154     // Standard but not supported pins
 155     USBTX = NC,
 156     USBRX = NC,
 157
 158 } PinName;
 159
 160 typedef enum {
 161     CHANNEL0 = FLEX_INT0_IRQn,
 162     CHANNEL1 = FLEX_INT1_IRQn,
 163     CHANNEL2 = FLEX_INT2_IRQn,
 164     CHANNEL3 = FLEX_INT3_IRQn,
 165     CHANNEL4 = FLEX_INT4_IRQn,
 166     CHANNEL5 = FLEX_INT5_IRQn,
 167     CHANNEL6 = FLEX_INT6_IRQn,
 168     CHANNEL7 = FLEX_INT7_IRQn
 169 } Channel;
 170
 171 typedef enum {
 172     PullUp = 2,
 173     PullDown = 1,
 174     PullNone = 0,
 175     Repeater = 3,
 176     OpenDrain = 4,
 177     PullDefault = PullDown
 178 } PinMode;
 179
 180 #ifdef __cplusplus
 181 }
 182 #endif
 183
 184 #endif