tool/mbed/mbed-sdk/libraries/mbed/targets/hal/TARGET_STM/TARGET_STM32F0/sleep.c

   1 /* mbed Microcontroller Library
   2  *******************************************************************************
   3  * Copyright (c) 2014, STMicroelectronics
   4  * All rights reserved.
   5  *
   6  * Redistribution and use in source and binary forms, with or without
   7  * modification, are permitted provided that the following conditions are met:
   8  *
   9  * 1. Redistributions of source code must retain the above copyright notice,
  10  *    this list of conditions and the following disclaimer.
  11  * 2. Redistributions in binary form must reproduce the above copyright notice,
  12  *    this list of conditions and the following disclaimer in the documentation
  13  *    and/or other materials provided with the distribution.
  14  * 3. Neither the name of STMicroelectronics nor the names of its contributors
  15  *    may be used to endorse or promote products derived from this software
  16  *    without specific prior written permission.
  17  *
  18  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
  19  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
  20  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
  21  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
  22  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  23  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
  24  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
  25  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
  26  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
  27  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  28  *******************************************************************************
  29  */
  30 #include "sleep_api.h"
  31
  32 #if DEVICE_SLEEP
  33
  34 #include "cmsis.h"
  35
  36 #if defined(TARGET_STM32F070RB)
  37 void sleep(void)
  38 {
  39     TIM_HandleTypeDef TimMasterHandle;
  40
  41     TimMasterHandle.Instance = TIM1;
  42
  43     // Disable HAL tick and us_ticker update interrupts
  44     __HAL_TIM_DISABLE_IT(&TimMasterHandle, (TIM_IT_CC2 | TIM_IT_UPDATE));
  45
  46     // Request to enter SLEEP mode
  47     HAL_PWR_EnterSLEEPMode(PWR_MAINREGULATOR_ON, PWR_SLEEPENTRY_WFI);
  48
  49     // Enable HAL tick and us_ticker update interrupts
  50     __HAL_TIM_ENABLE_IT(&TimMasterHandle, (TIM_IT_CC2 | TIM_IT_UPDATE));
  51 }
  52
  53 #elif defined(TARGET_STM32F030R8) || defined (TARGET_STM32F051R8)
  54 void sleep(void)
  55 {
  56     // Stop HAL systick
  57     HAL_SuspendTick();
  58     // Request to enter SLEEP mode
  59     HAL_PWR_EnterSLEEPMode(PWR_MAINREGULATOR_ON, PWR_SLEEPENTRY_WFI);
  60     // Restart HAL systick
  61     HAL_ResumeTick();
  62 }
  63
  64 #else
  65 static TIM_HandleTypeDef TimMasterHandle;
  66
  67 void sleep(void)
  68 {
  69     TimMasterHandle.Instance = TIM2;
  70
  71     // Disable HAL tick interrupt
  72     __HAL_TIM_DISABLE_IT(&TimMasterHandle, TIM_IT_CC2);
  73
  74     // Request to enter SLEEP mode
  75     HAL_PWR_EnterSLEEPMode(PWR_MAINREGULATOR_ON, PWR_SLEEPENTRY_WFI);
  76
  77     // Enable HAL tick interrupt
  78     __HAL_TIM_ENABLE_IT(&TimMasterHandle, TIM_IT_CC2);
  79 }
  80 #endif
  81
  82 #if defined(TARGET_STM32F030R8) || defined (TARGET_STM32F051R8)
  83 void deepsleep(void)
  84 {
  85     // Request to enter STOP mode with regulator in low power mode
  86     HAL_PWR_EnterSTOPMode(PWR_LOWPOWERREGULATOR_ON, PWR_STOPENTRY_WFI);
  87
  88     HAL_InitTick(TICK_INT_PRIORITY);
  89
  90     // After wake-up from STOP reconfigure the PLL
  91     SetSysClock();
  92
  93     HAL_InitTick(TICK_INT_PRIORITY);
  94 }
  95
  96 #else
  97 void deepsleep(void)
  98 {
  99     // Request to enter STOP mode with regulator in low power mode
 100     HAL_PWR_EnterSTOPMode(PWR_LOWPOWERREGULATOR_ON, PWR_STOPENTRY_WFI);
 101
 102     // After wake-up from STOP reconfigure the PLL
 103     SetSysClock();
 104 }
 105 #endif
 106
 107 #endif