hhkb/Makefile

   1 # Hey Emacs, this is a -*- makefile -*-
   2 #----------------------------------------------------------------------------
   3 # WinAVR Makefile Template written by Eric B. Weddington, Jörg Wunsch, et al.
   4 #
   5 # Released to the Public Domain
   6 #
   7 # Additional material for this makefile was written by:
   8 # Peter Fleury
   9 # Tim Henigan
  10 # Colin O'Flynn
  11 # Reiner Patommel
  12 # Markus Pfaff
  13 # Sander Pool
  14 # Frederik Rouleau
  15 # Carlos Lamas
  16 #
  17 #----------------------------------------------------------------------------
  18 # On command line:
  19 #
  20 # make all = Make software.
  21 #
  22 # make clean = Clean out built project files.
  23 #
  24 # make coff = Convert ELF to AVR COFF.
  25 #
  26 # make extcoff = Convert ELF to AVR Extended COFF.
  27 #
  28 # make program = Download the hex file to the device, using avrdude.
  29 #                Please customize the avrdude settings below first!
  30 #
  31 # make debug = Start either simulavr or avarice as specified for debugging,
  32 #              with avr-gdb or avr-insight as the front end for debugging.
  33 #
  34 # make filename.s = Just compile filename.c into the assembler code only.
  35 #
  36 # make filename.i = Create a preprocessed source file for use in submitting
  37 #                   bug reports to the GCC project.
  38 #
  39 # To rebuild project do "make clean" then "make all".
  40 #----------------------------------------------------------------------------
  41
  42 VENDOR_ID = 0xFEED
  43 PRODUCT_ID = 0xCAFE
  44 MANUFACTURER = 't.m.k.'
  45 PRODUCT = 't.m.k. HHKB pro'
  46 DESCRIPTION = 't.m.k. firmware for HHKB pro'
  47
  48 MOUSE_DELAY_TIME = 127
  49 USB_12KRO = yes
  50
  51 # Target file name (without extension).
  52 TARGET = tmk_hhkb
  53
  54 # Directory common source filess exist
  55 COMMON_DIR = ..
  56
  57 # Directory keyboard dependent files exist
  58 TARGET_DIR = .
  59
  60 # keyboard dependent files
  61 TARGET_SRC =    keymap.c \
  62                 matrix.c
  63
  64
  65 # MCU name, you MUST set this to match the board you are using
  66 # type "make clean" after changing this, so all files will be rebuilt
  67 #MCU = at90usb162       # Teensy 1.0
  68 #MCU = atmega32u4       # Teensy 2.0
  69 #MCU = at90usb646       # Teensy++ 1.0
  70 MCU = at90usb1286      # Teensy++ 2.0
  71
  72
  73 # Processor frequency.
  74 #   Normally the first thing your program should do is set the clock prescaler,
  75 #   so your program will run at the correct speed.  You should also set this
  76 #   variable to same clock speed.  The _delay_ms() macro uses this, and many
  77 #   examples use this variable to calculate timings.  Do not add a "UL" here.
  78 F_CPU = 16000000
  79
  80 include $(COMMON_DIR)/Makefile.common