tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/hal/TARGET_NXP/TARGET_LPC11UXX/TARGET_LPC11U34_421/PinNames.h

   1 /* mbed Microcontroller Library
   2  * Copyright (c) 2006-2015 ARM Limited
   3  *
   4  * Licensed under the Apache License, Version 2.0 (the "License");
   5  * you may not use this file except in compliance with the License.
   6  * You may obtain a copy of the License at
   7  *
   8  *     http://www.apache.org/licenses/LICENSE-2.0
   9  *
  10  * Unless required by applicable law or agreed to in writing, software
  11  * distributed under the License is distributed on an "AS IS" BASIS,
  12  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  13  * See the License for the specific language governing permissions and
  14  * limitations under the License.
  15  */
  16 #ifndef MBED_PINNAMES_H
  17 #define MBED_PINNAMES_H
  18
  19 #include "cmsis.h"
  20
  21 #ifdef __cplusplus
  22 extern "C" {
  23 #endif
  24
  25 typedef enum {
  26     PIN_INPUT,
  27     PIN_OUTPUT
  28 } PinDirection;
  29
  30 #define PORT_SHIFT  5
  31
  32 typedef enum {
  33     // LPC11U Pin Names
  34     P0_0 = 0,
  35     P0_1 = 1,
  36     P0_2 = 2,
  37     P0_3 = 3,
  38     P0_4 = 4,
  39     P0_5 = 5,
  40     P0_6 = 6,
  41     P0_7 = 7,
  42     P0_8 = 8,
  43     P0_9 = 9,
  44     P0_10 = 10,
  45     P0_11 = 11,
  46     P0_12 = 12,
  47     P0_13 = 13,
  48     P0_14 = 14,
  49     P0_15 = 15,
  50     P0_16 = 16,
  51     P0_17 = 17,
  52     P0_18 = 18,
  53     P0_19 = 19,
  54     P0_20 = 20,
  55     P0_21 = 21,
  56     P0_22 = 22,
  57     P0_23 = 23,
  58     P0_24 = 24,
  59     P0_25 = 25,
  60     P0_26 = 26,
  61     P0_27 = 27,
  62
  63     P1_0 = 32,
  64     P1_1 = 33,
  65     P1_2 = 34,
  66     P1_3 = 35,
  67     P1_4 = 36,
  68     P1_5 = 37,
  69     P1_6 = 38,
  70     P1_7 = 39,
  71     P1_8 = 40,
  72     P1_9 = 41,
  73     P1_10 = 42,
  74     P1_11 = 43,
  75     P1_12 = 44,
  76     P1_13 = 45,
  77     P1_14 = 46,
  78     P1_15 = 47,
  79     P1_16 = 48,
  80     P1_17 = 49,
  81     P1_18 = 50,
  82     P1_19 = 51,
  83     P1_20 = 52,
  84     P1_21 = 53,
  85     P1_22 = 54,
  86     P1_23 = 55,
  87     P1_24 = 56,
  88     P1_25 = 57,
  89     P1_26 = 58,
  90     P1_27 = 59,
  91     P1_28 = 60,
  92     P1_29 = 61,
  93
  94     P1_31 = 63,
  95
  96     // Other mbed Pin Names
  97     LED1 = P0_7,
  98     LED2 = P0_7,
  99     LED3 = P0_7,
 100     LED4 = P0_7,
 101
 102     UART_TX = P0_19,
 103     UART_RX = P0_18,
 104
 105     // Not connected
 106     NC = (int)0xFFFFFFFF,
 107
 108     // Standard but not supported pins
 109     USBTX = NC,
 110     USBRX = NC,
 111
 112 } PinName;
 113
 114 typedef enum {
 115     CHANNEL0 = FLEX_INT0_IRQn,
 116     CHANNEL1 = FLEX_INT1_IRQn,
 117     CHANNEL2 = FLEX_INT2_IRQn,
 118     CHANNEL3 = FLEX_INT3_IRQn,
 119     CHANNEL4 = FLEX_INT4_IRQn,
 120     CHANNEL5 = FLEX_INT5_IRQn,
 121     CHANNEL6 = FLEX_INT6_IRQn,
 122     CHANNEL7 = FLEX_INT7_IRQn
 123 } Channel;
 124
 125 typedef enum {
 126     PullUp = 2,
 127     PullDown = 1,
 128     PullNone = 0,
 129     Repeater = 3,
 130     OpenDrain = 4,
 131     PullDefault = PullDown
 132 } PinMode;
 133
 134 #ifdef __cplusplus
 135 }
 136 #endif
 137
 138 #endif