hhkb/Makefile.vusb

   1 # Target file name (without extension).
   2 TARGET = hhkb_vusb
   3
   4 # Directory common source filess exist
   5 COMMON_DIR = ..
   6
   7 # Directory keyboard dependent files exist
   8 TARGET_DIR = .
   9
  10 # keyboard dependent files
  11 TARGET_SRC =    main_vusb.c \
  12                 keymap.c \
  13                 matrix.c \
  14                 led.c
  15
  16 CONFIG_H = config_vusb.h
  17
  18
  19 # V-USB debug level: To use ps2_usart.c level must be 0
  20 # ps2_usart.c requires USART to receive PS/2 signal.
  21 OPT_DEFS = -DDEBUG_LEVEL=0
  22
  23
  24 # MCU name, you MUST set this to match the board you are using
  25 # type "make clean" after changing this, so all files will be rebuilt
  26 #MCU = at90usb162       # Teensy 1.0
  27 #MCU = atmega32u4       # Teensy 2.0
  28 #MCU = at90usb646       # Teensy++ 1.0
  29 #MCU = at90usb1286      # Teensy++ 2.0
  30 MCU = atmega168
  31
  32
  33 # Processor frequency.
  34 #   Normally the first thing your program should do is set the clock prescaler,
  35 #   so your program will run at the correct speed.  You should also set this
  36 #   variable to same clock speed.  The _delay_ms() macro uses this, and many
  37 #   examples use this variable to calculate timings.  Do not add a "UL" here.
  38 F_CPU = 20000000
  39
  40
  41 # Build Options
  42 #   comment out to disable the options.
  43 #
  44 MOUSEKEY_ENABLE = yes   # Mouse keys
  45 USB_EXTRA_ENABLE = yes  # Enhanced feature for Windows(Audio control and System control)
  46 #USB_NKRO_ENABLE = yes  # USB Nkey Rollover
  47
  48
  49
  50 #---------------- Programming Options --------------------------
  51 AVRDUDE = avrdude
  52 # Type: avrdude -c ? to get a full listing.
  53 AVRDUDE_PROGRAMMER = usbasp
  54 AVRDUDE_PORT =
  55 AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex
  56 #AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep
  57
  58 # Uncomment the following if you want avrdude's erase cycle counter.
  59 # Note that this counter needs to be initialized first using -Yn,
  60 # see avrdude manual.
  61 #AVRDUDE_ERASE_COUNTER = -y
  62
  63 # Uncomment the following if you do /not/ wish a verification to be
  64 # performed after programming the device.
  65 #AVRDUDE_NO_VERIFY = -V
  66
  67 # Increase verbosity level.  Please use this when submitting bug
  68 # reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude>
  69 # to submit bug reports.
  70 #AVRDUDE_VERBOSE = -v -v
  71
  72 #AVRDUDE_FLAGS = -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER)
  73 AVRDUDE_FLAGS = -p $(MCU) -c $(AVRDUDE_PROGRAMMER)
  74 AVRDUDE_FLAGS += $(AVRDUDE_NO_VERIFY)
  75 AVRDUDE_FLAGS += $(AVRDUDE_VERBOSE)
  76 AVRDUDE_FLAGS += $(AVRDUDE_ERASE_COUNTER)
  77
  78 PROGRAM_CMD = $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
  79
  80
  81
  82 include $(COMMON_DIR)/Makefile.vusb
  83 include $(COMMON_DIR)/Makefile.common