tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F0/stm32f0xx_hal_conf.h

   1 /**
   2   ******************************************************************************
   3   * @file    stm32f0xx_hal_conf_template.h
   4   * @author  MCD Application Team
   5   * @version V1.2.0
   6   * @date    11-December-2014
   7   * @brief   HAL configuration file.
   8   ******************************************************************************
   9   * @attention
  10   *
  11   * <h2><center>&copy; COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
  12   *
  13   * Redistribution and use in source and binary forms, with or without modification,
  14   * are permitted provided that the following conditions are met:
  15   *   1. Redistributions of source code must retain the above copyright notice,
  16   *      this list of conditions and the following disclaimer.
  17   *   2. Redistributions in binary form must reproduce the above copyright notice,
  18   *      this list of conditions and the following disclaimer in the documentation
  19   *      and/or other materials provided with the distribution.
  20   *   3. Neither the name of STMicroelectronics nor the names of its contributors
  21   *      may be used to endorse or promote products derived from this software
  22   *      without specific prior written permission.
  23   *
  24   * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
  25   * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
  26   * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
  27   * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
  28   * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  29   * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
  30   * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
  31   * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
  32   * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
  33   * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  34   *
  35   ******************************************************************************
  36   */
  37
  38 /* Define to prevent recursive inclusion -------------------------------------*/
  39 #ifndef __STM32F0xx_HAL_CONF_H
  40 #define __STM32F0xx_HAL_CONF_H
  41
  42 #ifdef __cplusplus
  43  extern "C" {
  44 #endif
  45
  46 /* Exported types ------------------------------------------------------------*/
  47 /* Exported constants --------------------------------------------------------*/
  48
  49 /* ########################## Module Selection ############################## */
  50 /**
  51   * @brief This is the list of modules to be used in the HAL driver
  52   */
  53 #define HAL_MODULE_ENABLED
  54 #define HAL_ADC_MODULE_ENABLED
  55 #define HAL_CAN_MODULE_ENABLED
  56 #define HAL_CEC_MODULE_ENABLED
  57 #define HAL_COMP_MODULE_ENABLED
  58 #define HAL_CORTEX_MODULE_ENABLED
  59 #define HAL_CRC_MODULE_ENABLED
  60 #define HAL_DAC_MODULE_ENABLED
  61 #define HAL_DMA_MODULE_ENABLED
  62 #define HAL_FLASH_MODULE_ENABLED
  63 #define HAL_GPIO_MODULE_ENABLED
  64 #define HAL_I2C_MODULE_ENABLED
  65 #define HAL_I2S_MODULE_ENABLED
  66 #define HAL_IRDA_MODULE_ENABLED
  67 #define HAL_IWDG_MODULE_ENABLED
  68 #define HAL_PCD_MODULE_ENABLED
  69 #define HAL_PWR_MODULE_ENABLED
  70 #define HAL_RCC_MODULE_ENABLED
  71 #define HAL_RTC_MODULE_ENABLED
  72 #define HAL_SMARTCARD_MODULE_ENABLED
  73 #define HAL_SMBUS_MODULE_ENABLED
  74 #define HAL_SPI_MODULE_ENABLED
  75 #define HAL_TIM_MODULE_ENABLED
  76 #define HAL_TSC_MODULE_ENABLED
  77 #define HAL_UART_MODULE_ENABLED
  78 #define HAL_USART_MODULE_ENABLED
  79 #define HAL_WWDG_MODULE_ENABLED
  80
  81 /* ######################### Oscillator Values adaptation ################### */
  82 /**
  83   * @brief Adjust the value of External High Speed oscillator (HSE) used in your application.
  84   *        This value is used by the RCC HAL module to compute the system frequency
  85   *        (when HSE is used as system clock source, directly or through the PLL).
  86   */
  87 #if !defined  (HSE_VALUE)
  88   #define HSE_VALUE    ((uint32_t)8000000) /*!< Value of the External oscillator in Hz */
  89 #endif /* HSE_VALUE */
  90
  91 /**
  92   * @brief In the following line adjust the External High Speed oscillator (HSE) Startup
  93   *        Timeout value
  94   */
  95 #if !defined  (HSE_STARTUP_TIMEOUT)
  96   #define HSE_STARTUP_TIMEOUT    ((uint32_t)500)   /*!< Time out for HSE start up, in ms */
  97 #endif /* HSE_STARTUP_TIMEOUT */
  98
  99 /**
 100   * @brief Internal High Speed oscillator (HSI) value.
 101   *        This value is used by the RCC HAL module to compute the system frequency
 102   *        (when HSI is used as system clock source, directly or through the PLL).
 103   */
 104 #if !defined  (HSI_VALUE)
 105   #define HSI_VALUE    ((uint32_t)8000000) /*!< Value of the Internal oscillator in Hz*/
 106 #endif /* HSI_VALUE */
 107
 108 /**
 109   * @brief In the following line adjust the Internal High Speed oscillator (HSI) Startup
 110   *        Timeout value
 111   */
 112 #if !defined  (HSI_STARTUP_TIMEOUT)
 113  #define HSI_STARTUP_TIMEOUT   ((uint32_t)5000) /*!< Time out for HSI start up */
 114 #endif /* HSI_STARTUP_TIMEOUT */
 115
 116 /**
 117   * @brief Internal High Speed oscillator for ADC (HSI14) value.
 118   */
 119 #if !defined  (HSI14_VALUE)
 120 #define HSI14_VALUE ((uint32_t)14000000) /*!< Value of the Internal High Speed oscillator for ADC in Hz.
 121                                              The real value may vary depending on the variations
 122                                              in voltage and temperature.  */
 123 #endif /* HSI14_VALUE */
 124
 125 /**
 126   * @brief Internal High Speed oscillator for USB (HSI48) value.
 127   */
 128 #if !defined  (HSI48_VALUE)
 129 #define HSI48_VALUE ((uint32_t)48000000) /*!< Value of the Internal High Speed oscillator for USB in Hz.
 130                                              The real value may vary depending on the variations
 131                                              in voltage and temperature.  */
 132 #endif /* HSI48_VALUE */
 133
 134 /**
 135   * @brief Internal Low Speed oscillator (LSI) value.
 136   */
 137 #if !defined  (LSI_VALUE)
 138  #define LSI_VALUE  ((uint32_t)40000)
 139 #endif /* LSI_VALUE */                      /*!< Value of the Internal Low Speed oscillator in Hz
 140                                              The real value may vary depending on the variations
 141                                              in voltage and temperature.  */
 142 /**
 143   * @brief External Low Speed oscillator (LSE) value.
 144   */
 145 #if !defined  (LSE_VALUE)
 146  #define LSE_VALUE  ((uint32_t)32768)    /*!< Value of the External Low Speed oscillator in Hz */
 147 #endif /* LSE_VALUE */
 148
 149
 150 /* Tip: To avoid modifying this file each time you need to use different HSE,
 151    ===  you can define the HSE value in your toolchain compiler preprocessor. */
 152
 153 /* ########################### System Configuration ######################### */
 154 /**
 155   * @brief This is the HAL system configuration section
 156   */
 157 #define  VDD_VALUE                    ((uint32_t)3300) /*!< Value of VDD in mv */
 158 #define  TICK_INT_PRIORITY            ((uint32_t)(1<<__NVIC_PRIO_BITS) - 1)   /*!< tick interrupt priority (lowest by default)             */
 159                                                                               /*  Warning: Must be set to higher priority for HAL_Delay()  */
 160                                                                               /*  and HAL_GetTick() usage under interrupt context          */
 161 #define  USE_RTOS                     0
 162 #define  PREFETCH_ENABLE              1
 163 #define  INSTRUCTION_CACHE_ENABLE     0
 164 #define  DATA_CACHE_ENABLE            0
 165
 166 /* ########################## Assert Selection ############################## */
 167 /**
 168   * @brief Uncomment the line below to expanse the "assert_param" macro in the
 169   *        HAL drivers code
 170   */
 171 /*#define USE_FULL_ASSERT    1*/
 172
 173 /* Includes ------------------------------------------------------------------*/
 174 /**
 175   * @brief Include module's header file
 176   */
 177
 178 #ifdef HAL_RCC_MODULE_ENABLED
 179  #include "stm32f0xx_hal_rcc.h"
 180 #endif /* HAL_RCC_MODULE_ENABLED */
 181
 182 #ifdef HAL_GPIO_MODULE_ENABLED
 183  #include "stm32f0xx_hal_gpio.h"
 184 #endif /* HAL_GPIO_MODULE_ENABLED */
 185
 186 #ifdef HAL_DMA_MODULE_ENABLED
 187   #include "stm32f0xx_hal_dma.h"
 188 #endif /* HAL_DMA_MODULE_ENABLED */
 189
 190 #ifdef HAL_CORTEX_MODULE_ENABLED
 191  #include "stm32f0xx_hal_cortex.h"
 192 #endif /* HAL_CORTEX_MODULE_ENABLED */
 193
 194 #ifdef HAL_ADC_MODULE_ENABLED
 195  #include "stm32f0xx_hal_adc.h"
 196 #endif /* HAL_ADC_MODULE_ENABLED */
 197
 198 #ifdef HAL_CAN_MODULE_ENABLED
 199  #include "stm32f0xx_hal_can.h"
 200 #endif /* HAL_CAN_MODULE_ENABLED */
 201
 202 #ifdef HAL_CEC_MODULE_ENABLED
 203  #include "stm32f0xx_hal_cec.h"
 204 #endif /* HAL_CEC_MODULE_ENABLED */
 205
 206 #ifdef HAL_COMP_MODULE_ENABLED
 207  #include "stm32f0xx_hal_comp.h"
 208 #endif /* HAL_COMP_MODULE_ENABLED */
 209
 210 #ifdef HAL_CRC_MODULE_ENABLED
 211  #include "stm32f0xx_hal_crc.h"
 212 #endif /* HAL_CRC_MODULE_ENABLED */
 213
 214 #ifdef HAL_DAC_MODULE_ENABLED
 215  #include "stm32f0xx_hal_dac.h"
 216 #endif /* HAL_DAC_MODULE_ENABLED */
 217
 218 #ifdef HAL_FLASH_MODULE_ENABLED
 219  #include "stm32f0xx_hal_flash.h"
 220 #endif /* HAL_FLASH_MODULE_ENABLED */
 221
 222 #ifdef HAL_I2C_MODULE_ENABLED
 223  #include "stm32f0xx_hal_i2c.h"
 224 #endif /* HAL_I2C_MODULE_ENABLED */
 225
 226 #ifdef HAL_I2S_MODULE_ENABLED
 227  #include "stm32f0xx_hal_i2s.h"
 228 #endif /* HAL_I2S_MODULE_ENABLED */
 229
 230 #ifdef HAL_IRDA_MODULE_ENABLED
 231  #include "stm32f0xx_hal_irda.h"
 232 #endif /* HAL_IRDA_MODULE_ENABLED */
 233
 234 #ifdef HAL_IWDG_MODULE_ENABLED
 235  #include "stm32f0xx_hal_iwdg.h"
 236 #endif /* HAL_IWDG_MODULE_ENABLED */
 237
 238 #ifdef HAL_PCD_MODULE_ENABLED
 239  #include "stm32f0xx_hal_pcd.h"
 240 #endif /* HAL_PCD_MODULE_ENABLED */
 241
 242 #ifdef HAL_PWR_MODULE_ENABLED
 243  #include "stm32f0xx_hal_pwr.h"
 244 #endif /* HAL_PWR_MODULE_ENABLED */
 245
 246 #ifdef HAL_RTC_MODULE_ENABLED
 247  #include "stm32f0xx_hal_rtc.h"
 248 #endif /* HAL_RTC_MODULE_ENABLED */
 249
 250 #ifdef HAL_SMARTCARD_MODULE_ENABLED
 251  #include "stm32f0xx_hal_smartcard.h"
 252 #endif /* HAL_SMARTCARD_MODULE_ENABLED */
 253
 254 #ifdef HAL_SMBUS_MODULE_ENABLED
 255  #include "stm32f0xx_hal_smbus.h"
 256 #endif /* HAL_SMBUS_MODULE_ENABLED */
 257
 258 #ifdef HAL_SPI_MODULE_ENABLED
 259  #include "stm32f0xx_hal_spi.h"
 260 #endif /* HAL_SPI_MODULE_ENABLED */
 261
 262 #ifdef HAL_TIM_MODULE_ENABLED
 263  #include "stm32f0xx_hal_tim.h"
 264 #endif /* HAL_TIM_MODULE_ENABLED */
 265
 266 #ifdef HAL_TSC_MODULE_ENABLED
 267  #include "stm32f0xx_hal_tsc.h"
 268 #endif /* HAL_TSC_MODULE_ENABLED */
 269
 270 #ifdef HAL_UART_MODULE_ENABLED
 271  #include "stm32f0xx_hal_uart.h"
 272 #endif /* HAL_UART_MODULE_ENABLED */
 273
 274 #ifdef HAL_USART_MODULE_ENABLED
 275  #include "stm32f0xx_hal_usart.h"
 276 #endif /* HAL_USART_MODULE_ENABLED */
 277
 278 #ifdef HAL_WWDG_MODULE_ENABLED
 279  #include "stm32f0xx_hal_wwdg.h"
 280 #endif /* HAL_WWDG_MODULE_ENABLED */
 281
 282 /* Exported macro ------------------------------------------------------------*/
 283 #ifdef  USE_FULL_ASSERT
 284 /**
 285   * @brief  The assert_param macro is used for function's parameters check.
 286   * @param  expr: If expr is false, it calls assert_failed function
 287   *         which reports the name of the source file and the source
 288   *         line number of the call that failed.
 289   *         If expr is true, it returns no value.
 290   * @retval None
 291   */
 292   #define assert_param(expr) ((expr) ? (void)0 : assert_failed((uint8_t *)__FILE__, __LINE__))
 293 /* Exported functions ------------------------------------------------------- */
 294   void assert_failed(uint8_t* file, uint32_t line);
 295 #else
 296   #define assert_param(expr) ((void)0)
 297 #endif /* USE_FULL_ASSERT */
 298
 299 #ifdef __cplusplus
 300 }
 301 #endif
 302
 303 #endif /* __STM32F0xx_HAL_CONF_H */
 304
 305
 306 /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
 307