tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F1/TARGET_DISCO_F100RB/stm32f1xx.h

   1 /**
   2   ******************************************************************************
   3   * @file    stm32f1xx.h
   4   * @author  MCD Application Team
   5   * @version V4.0.0
   6   * @date    16-December-2014
   7   * @brief   CMSIS STM32F1xx Device Peripheral Access Layer Header File.
   8   *
   9   *          The file is the unique include file that the application programmer
  10   *          is using in the C source code, usually in main.c. This file contains:
  11   *            - Configuration section that allows to select:
  12   *              - The STM32F1xx device used in the target application
  13   *              - To use or not the peripheral\92s drivers in application code(i.e.
  14   *                code will be based on direct access to peripheral\92s registers
  15   *                rather than drivers API), this option is controlled by
  16   *                "#define USE_HAL_DRIVER"
  17   *
  18   ******************************************************************************
  19   * @attention
  20   *
  21   * <h2><center>&copy; COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
  22   *
  23   * Redistribution and use in source and binary forms, with or without modification,
  24   * are permitted provided that the following conditions are met:
  25   *   1. Redistributions of source code must retain the above copyright notice,
  26   *      this list of conditions and the following disclaimer.
  27   *   2. Redistributions in binary form must reproduce the above copyright notice,
  28   *      this list of conditions and the following disclaimer in the documentation
  29   *      and/or other materials provided with the distribution.
  30   *   3. Neither the name of STMicroelectronics nor the names of its contributors
  31   *      may be used to endorse or promote products derived from this software
  32   *      without specific prior written permission.
  33   *
  34   * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
  35   * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
  36   * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
  37   * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
  38   * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  39   * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
  40   * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
  41   * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
  42   * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
  43   * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  44   *
  45   ******************************************************************************
  46   */
  47
  48 /** @addtogroup CMSIS
  49   * @{
  50   */
  51
  52 /** @addtogroup stm32f1xx
  53   * @{
  54   */
  55
  56 #ifndef __STM32F1XX_H
  57 #define __STM32F1XX_H
  58
  59 #ifdef __cplusplus
  60  extern "C" {
  61 #endif /* __cplusplus */
  62
  63 /** @addtogroup Library_configuration_section
  64   * @{
  65   */
  66
  67 /**
  68   * @brief STM32 Family
  69   */
  70 #if !defined (STM32F1)
  71 #define STM32F1
  72 #endif /* STM32F1 */
  73
  74 /* Uncomment the line below according to the target STM32L device used in your
  75    application
  76   */
  77
  78 #if !defined (STM32F100xB) && !defined (STM32F100xE) && !defined (STM32F101x6) && \
  79     !defined (STM32F101xB) && !defined (STM32F101xE) && !defined (STM32F101xG) && !defined (STM32F102x6) && !defined (STM32F102xB) && !defined (STM32F103x6) && \
  80     !defined (STM32F103xB) && !defined (STM32F103xE) && !defined (STM32F103xG) && !defined (STM32F105xC) && !defined (STM32F107xC)
  81 #define STM32F100xB     /*!< STM32F100C4, STM32F100R4, STM32F100C6, STM32F100R6, STM32F100C8, STM32F100R8, STM32F100V8, STM32F100CB, STM32F100RB and STM32F100VB */
  82   /* #define STM32F100xE */    /*!< STM32F100RC, STM32F100VC, STM32F100ZC, STM32F100RD, STM32F100VD, STM32F100ZD, STM32F100RE, STM32F100VE and STM32F100ZE */
  83   /* #define STM32F101x6  */   /*!< STM32F101C4, STM32F101R4, STM32F101T4, STM32F101C6, STM32F101R6 and STM32F101T6 Devices */
  84   /* #define STM32F101xB  */   /*!< STM32F101C8, STM32F101R8, STM32F101T8, STM32F101V8, STM32F101CB, STM32F101RB, STM32F101TB and STM32F101VB */
  85   /* #define STM32F101xE */    /*!< STM32F101RC, STM32F101VC, STM32F101ZC, STM32F101RD, STM32F101VD, STM32F101ZD, STM32F101RE, STM32F101VE and STM32F101ZE */
  86   /* #define STM32F101xG  */   /*!< STM32F101RF, STM32F101VF, STM32F101ZF, STM32F101RG, STM32F101VG and STM32F101ZG */
  87   /* #define STM32F102x6 */    /*!< STM32F102C4, STM32F102R4, STM32F102C6 and STM32F102R6 */
  88   /* #define STM32F102xB  */   /*!< STM32F102C8, STM32F102R8, STM32F102CB and STM32F102RB */
  89   /* #define STM32F103x6  */   /*!< STM32F103C4, STM32F103R4, STM32F103T4, STM32F103C6, STM32F103R6 and STM32F103T6 */
  90   /* #define STM32F103xB  */   /*!< STM32F103C8, STM32F103R8, STM32F103T8, STM32F103V8, STM32F103CB, STM32F103RB, STM32F103TB and STM32F103VB */
  91   /* #define STM32F103xE */    /*!< STM32F103RC, STM32F103VC, STM32F103ZC, STM32F103RD, STM32F103VD, STM32F103ZD, STM32F103RE, STM32F103VE and STM32F103ZE */
  92   /* #define STM32F103xG  */   /*!< STM32F103RF, STM32F103VF, STM32F103ZF, STM32F103RG, STM32F103VG and STM32F103ZG */
  93   /* #define STM32F105xC */    /*!< STM32F105R8, STM32F105V8, STM32F105RB, STM32F105VB, STM32F105RC and STM32F105VC */
  94   /* #define STM32F107xC  */   /*!< STM32F107RB, STM32F107VB, STM32F107RC and STM32F107VC */
  95 #endif
  96
  97 /*  Tip: To avoid modifying this file each time you need to switch between these
  98         devices, you can define the device in your toolchain compiler preprocessor.
  99   */
 100
 101 #if !defined  (USE_HAL_DRIVER)
 102 /**
 103  * @brief Comment the line below if you will not use the peripherals drivers.
 104    In this case, these drivers will not be included and the application code will
 105    be based on direct access to peripherals registers
 106    */
 107 #define USE_HAL_DRIVER
 108 #endif /* USE_HAL_DRIVER */
 109
 110 /**
 111   * @brief CMSIS Device version number V4.0.0
 112   */
 113 #define __STM32F1xx_CMSIS_DEVICE_VERSION_MAIN   (0x04) /*!< [31:24] main version */
 114 #define __STM32F1xx_CMSIS_DEVICE_VERSION_SUB1   (0x00) /*!< [23:16] sub1 version */
 115 #define __STM32F1xx_CMSIS_DEVICE_VERSION_SUB2   (0x00) /*!< [15:8]  sub2 version */
 116 #define __STM32F1xx_CMSIS_DEVICE_VERSION_RC     (0x00) /*!< [7:0]  release candidate */
 117 #define __STM32F1xx_CMSIS_DEVICE_VERSION        ((__CMSIS_DEVICE_VERSION_MAIN     << 24)\
 118                                       |(__CMSIS_DEVICE_HAL_VERSION_SUB1 << 16)\
 119                                       |(__CMSIS_DEVICE_HAL_VERSION_SUB2 << 8 )\
 120                                       |(__CMSIS_DEVICE_HAL_VERSION_RC))
 121
 122 /**
 123   * @}
 124   */
 125
 126 /** @addtogroup Device_Included
 127   * @{
 128   */
 129
 130 #if defined(STM32F100xB)
 131   #include "stm32f100xb.h"
 132 #elif defined(STM32F100xE)
 133   #include "stm32f100xe.h"
 134 #elif defined(STM32F101x6)
 135   #include "stm32f101x6.h"
 136 #elif defined(STM32F101xB)
 137   #include "stm32f101xb.h"
 138 #elif defined(STM32F101xE)
 139   #include "stm32f101xe.h"
 140 #elif defined(STM32F101xG)
 141   #include "stm32f101xg.h"
 142 #elif defined(STM32F102x6)
 143   #include "stm32f102x6.h"
 144 #elif defined(STM32F102xB)
 145   #include "stm32f102xb.h"
 146 #elif defined(STM32F103x6)
 147   #include "stm32f103x6.h"
 148 #elif defined(STM32F103xB)
 149   #include "stm32f103xb.h"
 150 #elif defined(STM32F103xE)
 151   #include "stm32f103xe.h"
 152 #elif defined(STM32F103xG)
 153   #include "stm32f103xg.h"
 154 #elif defined(STM32F105xC)
 155   #include "stm32f105xc.h"
 156 #elif defined(STM32F107xC)
 157   #include "stm32f107xc.h"
 158 #else
 159  #error "Please select first the target STM32F1xx device used in your application (in stm32f1xx.h file)"
 160 #endif
 161
 162 /**
 163   * @}
 164   */
 165
 166 /** @addtogroup Exported_types
 167   * @{
 168   */
 169 typedef enum
 170 {
 171   RESET = 0,
 172   SET = !RESET
 173 } FlagStatus, ITStatus;
 174
 175 typedef enum
 176 {
 177   DISABLE = 0,
 178   ENABLE = !DISABLE
 179 } FunctionalState;
 180 #define IS_FUNCTIONAL_STATE(STATE) (((STATE) == DISABLE) || ((STATE) == ENABLE))
 181
 182 typedef enum
 183 {
 184   ERROR = 0,
 185   SUCCESS = !ERROR
 186 } ErrorStatus;
 187
 188 /**
 189   * @}
 190   */
 191
 192
 193 /** @addtogroup Exported_macros
 194   * @{
 195   */
 196 #define SET_BIT(REG, BIT)     ((REG) |= (BIT))
 197
 198 #define CLEAR_BIT(REG, BIT)   ((REG) &= ~(BIT))
 199
 200 #define READ_BIT(REG, BIT)    ((REG) & (BIT))
 201
 202 #define CLEAR_REG(REG)        ((REG) = (0x0))
 203
 204 #define WRITE_REG(REG, VAL)   ((REG) = (VAL))
 205
 206 #define READ_REG(REG)         ((REG))
 207
 208 #define MODIFY_REG(REG, CLEARMASK, SETMASK)  WRITE_REG((REG), (((READ_REG(REG)) & (~(CLEARMASK))) | (SETMASK)))
 209
 210 #define POSITION_VAL(VAL)     (__CLZ(__RBIT(VAL)))
 211
 212
 213 /**
 214   * @}
 215   */
 216
 217 #if defined (USE_HAL_DRIVER)
 218  #include "stm32f1xx_hal.h"
 219 #endif /* USE_HAL_DRIVER */
 220
 221
 222 #ifdef __cplusplus
 223 }
 224 #endif /* __cplusplus */
 225
 226 #endif /* __STM32F1xx_H */
 227 /**
 228   * @}
 229   */
 230
 231 /**
 232   * @}
 233   */
 234
 235
 236
 237
 238 /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/