tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_UBLOX_C029/system_stm32f4xx.c

   1 /**
   2   ******************************************************************************
   3   * @file    system_stm32f4xx.c
   4   * @author  MCD Application Team
   5   * @version V2.1.0
   6   * @date    19-June-2014
   7   * @brief   CMSIS Cortex-M4 Device Peripheral Access Layer System Source File.
   8   *
   9   *   This file provides two functions and one global variable to be called from
  10   *   user application:
  11   *      - SystemInit(): This function is called at startup just after reset and
  12   *                      before branch to main program. This call is made inside
  13   *                      the "startup_stm32f4xx.s" file.
  14   *
  15   *      - SystemCoreClock variable: Contains the core clock (HCLK), it can be used
  16   *                                  by the user application to setup the SysTick
  17   *                                  timer or configure other parameters.
  18   *
  19   *      - SystemCoreClockUpdate(): Updates the variable SystemCoreClock and must
  20   *                                 be called whenever the core clock is changed
  21   *                                 during program execution.
  22   *
  23   * This file configures the system clock as follows:
  24   *-----------------------------------------------------------------------------
  25   * System clock source                | 1- PLL_HSE_EXTC        | 3- PLL_HSI
  26   *                                    | (external 8 MHz clock) | (internal 16 MHz)
  27   *                                    | 2- PLL_HSE_XTAL        |
  28   *                                    | (external 8 MHz xtal)  |
  29   *-----------------------------------------------------------------------------
  30   * SYSCLK(MHz)                        | 100                    | 100
  31   *-----------------------------------------------------------------------------
  32   * AHBCLK (MHz)                       | 100                    | 100
  33   *-----------------------------------------------------------------------------
  34   * APB1CLK (MHz)                      | 50                     | 50
  35   *-----------------------------------------------------------------------------
  36   * APB2CLK (MHz)                      | 100                    | 100
  37   *-----------------------------------------------------------------------------
  38   * USB capable (48 MHz precise clock) | NO                     | NO
  39   *-----------------------------------------------------------------------------
  40   ******************************************************************************
  41   * @attention
  42   *
  43   * <h2><center>&copy; COPYRIGHT 2014 STMicroelectronics</center></h2>
  44   *
  45   * Redistribution and use in source and binary forms, with or without modification,
  46   * are permitted provided that the following conditions are met:
  47   *   1. Redistributions of source code must retain the above copyright notice,
  48   *      this list of conditions and the following disclaimer.
  49   *   2. Redistributions in binary form must reproduce the above copyright notice,
  50   *      this list of conditions and the following disclaimer in the documentation
  51   *      and/or other materials provided with the distribution.
  52   *   3. Neither the name of STMicroelectronics nor the names of its contributors
  53   *      may be used to endorse or promote products derived from this software
  54   *      without specific prior written permission.
  55   *
  56   * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
  57   * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
  58   * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
  59   * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
  60   * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  61   * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
  62   * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
  63   * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
  64   * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
  65   * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  66   *
  67   ******************************************************************************
  68   */
  69
  70 /** @addtogroup CMSIS
  71   * @{
  72   */
  73
  74 /** @addtogroup stm32f4xx_system
  75   * @{
  76   */
  77
  78 /** @addtogroup STM32F4xx_System_Private_Includes
  79   * @{
  80   */
  81
  82
  83 #include "stm32f4xx.h"
  84 #include "hal_tick.h"
  85
  86 #if !defined  (HSE_VALUE)
  87   #define HSE_VALUE    ((uint32_t)8000000) /*!< Default value of the External oscillator in Hz */
  88 #endif /* HSE_VALUE */
  89
  90 #if !defined  (HSI_VALUE)
  91   #define HSI_VALUE    ((uint32_t)16000000) /*!< Value of the Internal oscillator in Hz*/
  92 #endif /* HSI_VALUE */
  93
  94 /**
  95   * @}
  96   */
  97
  98 /** @addtogroup STM32F4xx_System_Private_TypesDefinitions
  99   * @{
 100   */
 101
 102 /**
 103   * @}
 104   */
 105
 106 /** @addtogroup STM32F4xx_System_Private_Defines
 107   * @{
 108   */
 109
 110 /************************* Miscellaneous Configuration ************************/
 111 /*!< Uncomment the following line if you need to use external SRAM or SDRAM mounted
 112      on STM324xG_EVAL/STM324x9I_EVAL boards as data memory  */
 113 #if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) || defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
 114 /* #define DATA_IN_ExtSRAM */
 115 #endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
 116
 117 #if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
 118 /* #define DATA_IN_ExtSDRAM */
 119 #endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
 120
 121 #if defined(DATA_IN_ExtSRAM) && defined(DATA_IN_ExtSDRAM)
 122  #error "Please select DATA_IN_ExtSRAM or DATA_IN_ExtSDRAM "
 123 #endif /* DATA_IN_ExtSRAM && DATA_IN_ExtSDRAM */
 124
 125 /*!< Uncomment the following line if you need to relocate your vector Table in
 126      Internal SRAM. */
 127 /* #define VECT_TAB_SRAM */
 128 #define VECT_TAB_OFFSET  0x00 /*!< Vector Table base offset field.
 129                                    This value must be a multiple of 0x200. */
 130 /******************************************************************************/
 131
 132 /**
 133   * @}
 134   */
 135
 136 /** @addtogroup STM32F4xx_System_Private_Macros
 137   * @{
 138   */
 139
 140 /* Select the clock sources (other than HSI) to start with (0=OFF, 1=ON) */
 141 #define USE_PLL_HSE_EXTC (1) /* Use external clock */
 142 #define USE_PLL_HSE_XTAL (1) /* Use external xtal */
 143
 144 /**
 145   * @}
 146   */
 147
 148 /** @addtogroup STM32F4xx_System_Private_Variables
 149   * @{
 150   */
 151   /* This variable is updated in three ways:
 152       1) by calling CMSIS function SystemCoreClockUpdate()
 153       2) by calling HAL API function HAL_RCC_GetHCLKFreq()
 154       3) each time HAL_RCC_ClockConfig() is called to configure the system clock frequency
 155          Note: If you use this function to configure the system clock; then there
 156                is no need to call the 2 first functions listed above, since SystemCoreClock
 157                variable is updated automatically.
 158   */
 159 uint32_t SystemCoreClock = 16000000;
 160 const uint8_t AHBPrescTable[16] = {0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 3, 4, 6, 7, 8, 9};
 161
 162 /**
 163   * @}
 164   */
 165
 166 /** @addtogroup STM32F4xx_System_Private_FunctionPrototypes
 167   * @{
 168   */
 169
 170 #if defined (DATA_IN_ExtSRAM) || defined (DATA_IN_ExtSDRAM)
 171   static void SystemInit_ExtMemCtl(void);
 172 #endif /* DATA_IN_ExtSRAM || DATA_IN_ExtSDRAM */
 173
 174 #if (USE_PLL_HSE_XTAL != 0) || (USE_PLL_HSE_EXTC != 0)
 175 uint8_t SetSysClock_PLL_HSE(uint8_t bypass);
 176 #endif
 177
 178 uint8_t SetSysClock_PLL_HSI(void);
 179
 180 /**
 181   * @}
 182   */
 183
 184 /** @addtogroup STM32F4xx_System_Private_Functions
 185   * @{
 186   */
 187
 188 /**
 189   * @brief  Setup the microcontroller system
 190   *         Initialize the FPU setting, vector table location and External memory
 191   *         configuration.
 192   * @param  None
 193   * @retval None
 194   */
 195 void SystemInit(void)
 196 {
 197   /* FPU settings ------------------------------------------------------------*/
 198   #if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
 199     SCB->CPACR |= ((3UL << 10*2)|(3UL << 11*2));  /* set CP10 and CP11 Full Access */
 200   #endif
 201   /* Reset the RCC clock configuration to the default reset state ------------*/
 202   /* Set HSION bit */
 203   RCC->CR |= (uint32_t)0x00000001;
 204
 205   /* Reset CFGR register */
 206   RCC->CFGR = 0x00000000;
 207
 208   /* Reset HSEON, CSSON and PLLON bits */
 209   RCC->CR &= (uint32_t)0xFEF6FFFF;
 210
 211   /* Reset PLLCFGR register */
 212   RCC->PLLCFGR = 0x24003010;
 213
 214   /* Reset HSEBYP bit */
 215   RCC->CR &= (uint32_t)0xFFFBFFFF;
 216
 217   /* Disable all interrupts */
 218   RCC->CIR = 0x00000000;
 219
 220 #if defined (DATA_IN_ExtSRAM) || defined (DATA_IN_ExtSDRAM)
 221   SystemInit_ExtMemCtl();
 222 #endif /* DATA_IN_ExtSRAM || DATA_IN_ExtSDRAM */
 223
 224   /* Configure the Vector Table location add offset address ------------------*/
 225 #ifdef VECT_TAB_SRAM
 226   SCB->VTOR = SRAM_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal SRAM */
 227 #else
 228   SCB->VTOR = FLASH_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal FLASH */
 229 #endif
 230
 231   /* Configure the Cube driver */
 232   SystemCoreClock = 16000000; // At this stage the HSI is used as system clock
 233   HAL_Init();
 234
 235   /* Configure the System clock source, PLL Multiplier and Divider factors,
 236      AHB/APBx prescalers and Flash settings */
 237   SetSysClock();
 238
 239   /* Reset the timer to avoid issues after the RAM initialization */
 240   TIM_MST_RESET_ON;
 241   TIM_MST_RESET_OFF;
 242 }
 243
 244 /**
 245    * @brief  Update SystemCoreClock variable according to Clock Register Values.
 246   *         The SystemCoreClock variable contains the core clock (HCLK), it can
 247   *         be used by the user application to setup the SysTick timer or configure
 248   *         other parameters.
 249   *
 250   * @note   Each time the core clock (HCLK) changes, this function must be called
 251   *         to update SystemCoreClock variable value. Otherwise, any configuration
 252   *         based on this variable will be incorrect.
 253   *
 254   * @note   - The system frequency computed by this function is not the real
 255   *           frequency in the chip. It is calculated based on the predefined
 256   *           constant and the selected clock source:
 257   *
 258   *           - If SYSCLK source is HSI, SystemCoreClock will contain the HSI_VALUE(*)
 259   *
 260   *           - If SYSCLK source is HSE, SystemCoreClock will contain the HSE_VALUE(**)
 261   *
 262   *           - If SYSCLK source is PLL, SystemCoreClock will contain the HSE_VALUE(**)
 263   *             or HSI_VALUE(*) multiplied/divided by the PLL factors.
 264   *
 265   *         (*) HSI_VALUE is a constant defined in stm32f4xx_hal_conf.h file (default value
 266   *             16 MHz) but the real value may vary depending on the variations
 267   *             in voltage and temperature.
 268   *
 269   *         (**) HSE_VALUE is a constant defined in stm32f4xx_hal_conf.h file (its value
 270   *              depends on the application requirements), user has to ensure that HSE_VALUE
 271   *              is same as the real frequency of the crystal used. Otherwise, this function
 272   *              may have wrong result.
 273   *
 274   *         - The result of this function could be not correct when using fractional
 275   *           value for HSE crystal.
 276   *
 277   * @param  None
 278   * @retval None
 279   */
 280 void SystemCoreClockUpdate(void)
 281 {
 282   uint32_t tmp = 0, pllvco = 0, pllp = 2, pllsource = 0, pllm = 2;
 283
 284   /* Get SYSCLK source -------------------------------------------------------*/
 285   tmp = RCC->CFGR & RCC_CFGR_SWS;
 286
 287   switch (tmp)
 288   {
 289     case 0x00:  /* HSI used as system clock source */
 290       SystemCoreClock = HSI_VALUE;
 291       break;
 292     case 0x04:  /* HSE used as system clock source */
 293       SystemCoreClock = HSE_VALUE;
 294       break;
 295     case 0x08:  /* PLL used as system clock source */
 296
 297       /* PLL_VCO = (HSE_VALUE or HSI_VALUE / PLL_M) * PLL_N
 298          SYSCLK = PLL_VCO / PLL_P
 299          */
 300       pllsource = (RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) >> 22;
 301       pllm = RCC->PLLCFGR & RCC_PLLCFGR_PLLM;
 302
 303       if (pllsource != 0)
 304       {
 305         /* HSE used as PLL clock source */
 306         pllvco = (HSE_VALUE / pllm) * ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> 6);
 307       }
 308       else
 309       {
 310         /* HSI used as PLL clock source */
 311         pllvco = (HSI_VALUE / pllm) * ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> 6);
 312       }
 313
 314       pllp = (((RCC->PLLCFGR & RCC_PLLCFGR_PLLP) >>16) + 1 ) *2;
 315       SystemCoreClock = pllvco/pllp;
 316       break;
 317     default:
 318       SystemCoreClock = HSI_VALUE;
 319       break;
 320   }
 321   /* Compute HCLK frequency --------------------------------------------------*/
 322   /* Get HCLK prescaler */
 323   tmp = AHBPrescTable[((RCC->CFGR & RCC_CFGR_HPRE) >> 4)];
 324   /* HCLK frequency */
 325   SystemCoreClock >>= tmp;
 326 }
 327
 328 #if defined (DATA_IN_ExtSRAM) || defined (DATA_IN_ExtSDRAM)
 329 /**
 330   * @brief  Setup the external memory controller.
 331   *         Called in startup_stm32f4xx.s before jump to main.
 332   *         This function configures the external memories (SRAM/SDRAM)
 333   *         This SRAM/SDRAM will be used as program data memory (including heap and stack).
 334   * @param  None
 335   * @retval None
 336   */
 337 void SystemInit_ExtMemCtl(void)
 338 {
 339 #if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
 340 #if defined (DATA_IN_ExtSDRAM)
 341   register uint32_t tmpreg = 0, timeout = 0xFFFF;
 342   register uint32_t index;
 343
 344   /* Enable GPIOC, GPIOD, GPIOE, GPIOF, GPIOG, GPIOH and GPIOI interface
 345       clock */
 346   RCC->AHB1ENR |= 0x000001F8;
 347
 348   /* Connect PDx pins to FMC Alternate function */
 349   GPIOD->AFR[0]  = 0x000000CC;
 350   GPIOD->AFR[1]  = 0xCC000CCC;
 351   /* Configure PDx pins in Alternate function mode */
 352   GPIOD->MODER   = 0xA02A000A;
 353   /* Configure PDx pins speed to 50 MHz */
 354   GPIOD->OSPEEDR = 0xA02A000A;
 355   /* Configure PDx pins Output type to push-pull */
 356   GPIOD->OTYPER  = 0x00000000;
 357   /* No pull-up, pull-down for PDx pins */
 358   GPIOD->PUPDR   = 0x00000000;
 359
 360   /* Connect PEx pins to FMC Alternate function */
 361   GPIOE->AFR[0]  = 0xC00000CC;
 362   GPIOE->AFR[1]  = 0xCCCCCCCC;
 363   /* Configure PEx pins in Alternate function mode */
 364   GPIOE->MODER   = 0xAAAA800A;
 365   /* Configure PEx pins speed to 50 MHz */
 366   GPIOE->OSPEEDR = 0xAAAA800A;
 367   /* Configure PEx pins Output type to push-pull */
 368   GPIOE->OTYPER  = 0x00000000;
 369   /* No pull-up, pull-down for PEx pins */
 370   GPIOE->PUPDR   = 0x00000000;
 371
 372   /* Connect PFx pins to FMC Alternate function */
 373   GPIOF->AFR[0]  = 0xCCCCCCCC;
 374   GPIOF->AFR[1]  = 0xCCCCCCCC;
 375   /* Configure PFx pins in Alternate function mode */
 376   GPIOF->MODER   = 0xAA800AAA;
 377   /* Configure PFx pins speed to 50 MHz */
 378   GPIOF->OSPEEDR = 0xAA800AAA;
 379   /* Configure PFx pins Output type to push-pull */
 380   GPIOF->OTYPER  = 0x00000000;
 381   /* No pull-up, pull-down for PFx pins */
 382   GPIOF->PUPDR   = 0x00000000;
 383
 384   /* Connect PGx pins to FMC Alternate function */
 385   GPIOG->AFR[0]  = 0xCCCCCCCC;
 386   GPIOG->AFR[1]  = 0xCCCCCCCC;
 387   /* Configure PGx pins in Alternate function mode */
 388   GPIOG->MODER   = 0xAAAAAAAA;
 389   /* Configure PGx pins speed to 50 MHz */
 390   GPIOG->OSPEEDR = 0xAAAAAAAA;
 391   /* Configure PGx pins Output type to push-pull */
 392   GPIOG->OTYPER  = 0x00000000;
 393   /* No pull-up, pull-down for PGx pins */
 394   GPIOG->PUPDR   = 0x00000000;
 395
 396   /* Connect PHx pins to FMC Alternate function */
 397   GPIOH->AFR[0]  = 0x00C0CC00;
 398   GPIOH->AFR[1]  = 0xCCCCCCCC;
 399   /* Configure PHx pins in Alternate function mode */
 400   GPIOH->MODER   = 0xAAAA08A0;
 401   /* Configure PHx pins speed to 50 MHz */
 402   GPIOH->OSPEEDR = 0xAAAA08A0;
 403   /* Configure PHx pins Output type to push-pull */
 404   GPIOH->OTYPER  = 0x00000000;
 405   /* No pull-up, pull-down for PHx pins */
 406   GPIOH->PUPDR   = 0x00000000;
 407
 408   /* Connect PIx pins to FMC Alternate function */
 409   GPIOI->AFR[0]  = 0xCCCCCCCC;
 410   GPIOI->AFR[1]  = 0x00000CC0;
 411   /* Configure PIx pins in Alternate function mode */
 412   GPIOI->MODER   = 0x0028AAAA;
 413   /* Configure PIx pins speed to 50 MHz */
 414   GPIOI->OSPEEDR = 0x0028AAAA;
 415   /* Configure PIx pins Output type to push-pull */
 416   GPIOI->OTYPER  = 0x00000000;
 417   /* No pull-up, pull-down for PIx pins */
 418   GPIOI->PUPDR   = 0x00000000;
 419
 420 /*-- FMC Configuration ------------------------------------------------------*/
 421   /* Enable the FMC interface clock */
 422   RCC->AHB3ENR |= 0x00000001;
 423
 424   /* Configure and enable SDRAM bank1 */
 425   FMC_Bank5_6->SDCR[0] = 0x000019E0;
 426   FMC_Bank5_6->SDTR[0] = 0x01115351;
 427
 428   /* SDRAM initialization sequence */
 429   /* Clock enable command */
 430   FMC_Bank5_6->SDCMR = 0x00000011;
 431   tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
 432   while((tmpreg != 0) && (timeout-- > 0))
 433   {
 434     tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
 435   }
 436
 437   /* Delay */
 438   for (index = 0; index<1000; index++);
 439
 440   /* PALL command */
 441   FMC_Bank5_6->SDCMR = 0x00000012;
 442   timeout = 0xFFFF;
 443   while((tmpreg != 0) && (timeout-- > 0))
 444   {
 445     tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
 446   }
 447
 448   /* Auto refresh command */
 449   FMC_Bank5_6->SDCMR = 0x00000073;
 450   timeout = 0xFFFF;
 451   while((tmpreg != 0) && (timeout-- > 0))
 452   {
 453     tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
 454   }
 455
 456   /* MRD register program */
 457   FMC_Bank5_6->SDCMR = 0x00046014;
 458   timeout = 0xFFFF;
 459   while((tmpreg != 0) && (timeout-- > 0))
 460   {
 461     tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
 462   }
 463
 464   /* Set refresh count */
 465   tmpreg = FMC_Bank5_6->SDRTR;
 466   FMC_Bank5_6->SDRTR = (tmpreg | (0x0000027C<<1));
 467
 468   /* Disable write protection */
 469   tmpreg = FMC_Bank5_6->SDCR[0];
 470   FMC_Bank5_6->SDCR[0] = (tmpreg & 0xFFFFFDFF);
 471 #endif /* DATA_IN_ExtSDRAM */
 472 #endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
 473
 474 #if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) || defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
 475 #if defined(DATA_IN_ExtSRAM)
 476 /*-- GPIOs Configuration -----------------------------------------------------*/
 477    /* Enable GPIOD, GPIOE, GPIOF and GPIOG interface clock */
 478   RCC->AHB1ENR   |= 0x00000078;
 479
 480   /* Connect PDx pins to FMC Alternate function */
 481   GPIOD->AFR[0]  = 0x00CCC0CC;
 482   GPIOD->AFR[1]  = 0xCCCCCCCC;
 483   /* Configure PDx pins in Alternate function mode */
 484   GPIOD->MODER   = 0xAAAA0A8A;
 485   /* Configure PDx pins speed to 100 MHz */
 486   GPIOD->OSPEEDR = 0xFFFF0FCF;
 487   /* Configure PDx pins Output type to push-pull */
 488   GPIOD->OTYPER  = 0x00000000;
 489   /* No pull-up, pull-down for PDx pins */
 490   GPIOD->PUPDR   = 0x00000000;
 491
 492   /* Connect PEx pins to FMC Alternate function */
 493   GPIOE->AFR[0]  = 0xC00CC0CC;
 494   GPIOE->AFR[1]  = 0xCCCCCCCC;
 495   /* Configure PEx pins in Alternate function mode */
 496   GPIOE->MODER   = 0xAAAA828A;
 497   /* Configure PEx pins speed to 100 MHz */
 498   GPIOE->OSPEEDR = 0xFFFFC3CF;
 499   /* Configure PEx pins Output type to push-pull */
 500   GPIOE->OTYPER  = 0x00000000;
 501   /* No pull-up, pull-down for PEx pins */
 502   GPIOE->PUPDR   = 0x00000000;
 503
 504   /* Connect PFx pins to FMC Alternate function */
 505   GPIOF->AFR[0]  = 0x00CCCCCC;
 506   GPIOF->AFR[1]  = 0xCCCC0000;
 507   /* Configure PFx pins in Alternate function mode */
 508   GPIOF->MODER   = 0xAA000AAA;
 509   /* Configure PFx pins speed to 100 MHz */
 510   GPIOF->OSPEEDR = 0xFF000FFF;
 511   /* Configure PFx pins Output type to push-pull */
 512   GPIOF->OTYPER  = 0x00000000;
 513   /* No pull-up, pull-down for PFx pins */
 514   GPIOF->PUPDR   = 0x00000000;
 515
 516   /* Connect PGx pins to FMC Alternate function */
 517   GPIOG->AFR[0]  = 0x00CCCCCC;
 518   GPIOG->AFR[1]  = 0x000000C0;
 519   /* Configure PGx pins in Alternate function mode */
 520   GPIOG->MODER   = 0x00085AAA;
 521   /* Configure PGx pins speed to 100 MHz */
 522   GPIOG->OSPEEDR = 0x000CAFFF;
 523   /* Configure PGx pins Output type to push-pull */
 524   GPIOG->OTYPER  = 0x00000000;
 525   /* No pull-up, pull-down for PGx pins */
 526   GPIOG->PUPDR   = 0x00000000;
 527
 528 /*-- FMC/FSMC Configuration --------------------------------------------------*/
 529   /* Enable the FMC/FSMC interface clock */
 530   RCC->AHB3ENR         |= 0x00000001;
 531
 532 #if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx)
 533   /* Configure and enable Bank1_SRAM2 */
 534   FMC_Bank1->BTCR[2]  = 0x00001011;
 535   FMC_Bank1->BTCR[3]  = 0x00000201;
 536   FMC_Bank1E->BWTR[2] = 0x0fffffff;
 537 #endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
 538
 539 #if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx)|| defined(STM32F417xx)
 540   /* Configure and enable Bank1_SRAM2 */
 541   FSMC_Bank1->BTCR[2]  = 0x00001011;
 542   FSMC_Bank1->BTCR[3]  = 0x00000201;
 543   FSMC_Bank1E->BWTR[2] = 0x0FFFFFFF;
 544 #endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx */
 545
 546 #endif /* DATA_IN_ExtSRAM */
 547 #endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
 548 }
 549 #endif /* DATA_IN_ExtSRAM || DATA_IN_ExtSDRAM */
 550
 551 /**
 552   * @brief  Configures the System clock source, PLL Multiplier and Divider factors,
 553   *               AHB/APBx prescalers and Flash settings
 554   * @note   This function should be called only once the RCC clock configuration
 555   *         is reset to the default reset state (done in SystemInit() function).
 556   * @param  None
 557   * @retval None
 558   */
 559 void SetSysClock(void)
 560 {
 561   /* 1- Try to start with HSE and external clock */
 562 #if USE_PLL_HSE_EXTC != 0
 563   if (SetSysClock_PLL_HSE(1) == 0)
 564 #endif
 565   {
 566     /* 2- If fail try to start with HSE and external xtal */
 567     #if USE_PLL_HSE_XTAL != 0
 568     if (SetSysClock_PLL_HSE(0) == 0)
 569     #endif
 570     {
 571       /* 3- If fail start with HSI clock */
 572       if (SetSysClock_PLL_HSI() == 0)
 573       {
 574         while(1)
 575         {
 576           // [TODO] Put something here to tell the user that a problem occured...
 577         }
 578       }
 579     }
 580   }
 581
 582   /* Output clock on MCO2 pin(PC9) for debugging purpose */
 583   //HAL_RCC_MCOConfig(RCC_MCO2, RCC_MCO2SOURCE_SYSCLK, RCC_MCODIV_4); // 100 MHz / 4 = 25 MHz
 584 }
 585
 586 #if (USE_PLL_HSE_XTAL != 0) || (USE_PLL_HSE_EXTC != 0)
 587 /******************************************************************************/
 588 /*            PLL (clocked by HSE) used as System clock source                */
 589 /******************************************************************************/
 590 uint8_t SetSysClock_PLL_HSE(uint8_t bypass)
 591 {
 592   RCC_ClkInitTypeDef RCC_ClkInitStruct;
 593   RCC_OscInitTypeDef RCC_OscInitStruct;
 594
 595   /* The voltage scaling allows optimizing the power consumption when the device is
 596      clocked below the maximum system frequency, to update the voltage scaling value
 597      regarding system frequency refer to product datasheet. */
 598   __PWR_CLK_ENABLE();
 599   __HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE2);
 600
 601   /* Enable HSE oscillator and activate PLL with HSE as source */
 602   RCC_OscInitStruct.OscillatorType      = RCC_OSCILLATORTYPE_HSE;
 603   if (bypass == 0)
 604   {
 605     RCC_OscInitStruct.HSEState          = RCC_HSE_ON; /* External 8 MHz xtal on OSC_IN/OSC_OUT */
 606   }
 607   else
 608   {
 609     RCC_OscInitStruct.HSEState          = RCC_HSE_BYPASS; /* External 8 MHz clock on OSC_IN */
 610   }
 611   RCC_OscInitStruct.PLL.PLLState        = RCC_PLL_ON;
 612   RCC_OscInitStruct.PLL.PLLSource       = RCC_PLLSOURCE_HSE;
 613   //RCC_OscInitStruct.PLL.PLLM          = 8;             // VCO input clock = 1 MHz (8 MHz / 8)
 614   //RCC_OscInitStruct.PLL.PLLN          = 400;           // VCO output clock = 400 MHz (1 MHz * 400)
 615   RCC_OscInitStruct.PLL.PLLM            = 4;             // VCO input clock = 2 MHz (8 MHz / 4)
 616   RCC_OscInitStruct.PLL.PLLN            = 200;           // VCO output clock = 400 MHz (2 MHz * 200)
 617   RCC_OscInitStruct.PLL.PLLP            = RCC_PLLP_DIV4; // PLLCLK = 100 MHz (400 MHz / 4)
 618   RCC_OscInitStruct.PLL.PLLQ            = 9;             // USB clock = 44.44 MHz (400 MHz / 9) --> Not good for USB
 619   if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK)
 620   {
 621     return 0; // FAIL
 622   }
 623
 624   /* Select PLL as system clock source and configure the HCLK, PCLK1 and PCLK2 clocks dividers */
 625   RCC_ClkInitStruct.ClockType      = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2);
 626   RCC_ClkInitStruct.SYSCLKSource   = RCC_SYSCLKSOURCE_PLLCLK; // 100 MHz
 627   RCC_ClkInitStruct.AHBCLKDivider  = RCC_SYSCLK_DIV1;         // 100 MHz
 628   RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV2;           //  50 MHz
 629   RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1;           // 100 MHz
 630   if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_3) != HAL_OK)
 631   {
 632     return 0; // FAIL
 633   }
 634
 635   /* Output clock on MCO1 pin(PA8) for debugging purpose */
 636
 637   //if (bypass == 0)
 638   //  HAL_RCC_MCOConfig(RCC_MCO1, RCC_MCO1SOURCE_HSE, RCC_MCODIV_2); // 4 MHz with xtal
 639   //else
 640   //  HAL_RCC_MCOConfig(RCC_MCO1, RCC_MCO1SOURCE_HSE, RCC_MCODIV_1); // 8 MHz with external clock
 641
 642   return 1; // OK
 643 }
 644 #endif
 645
 646 /******************************************************************************/
 647 /*            PLL (clocked by HSI) used as System clock source                */
 648 /******************************************************************************/
 649 uint8_t SetSysClock_PLL_HSI(void)
 650 {
 651   RCC_ClkInitTypeDef RCC_ClkInitStruct;
 652   RCC_OscInitTypeDef RCC_OscInitStruct;
 653
 654   /* The voltage scaling allows optimizing the power consumption when the device is
 655      clocked below the maximum system frequency, to update the voltage scaling value
 656      regarding system frequency refer to product datasheet. */
 657   __PWR_CLK_ENABLE();
 658   __HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE2);
 659
 660   /* Enable HSI oscillator and activate PLL with HSI as source */
 661   RCC_OscInitStruct.OscillatorType      = RCC_OSCILLATORTYPE_HSI | RCC_OSCILLATORTYPE_HSE;
 662   RCC_OscInitStruct.HSIState            = RCC_HSI_ON;
 663   RCC_OscInitStruct.HSEState            = RCC_HSE_OFF;
 664   RCC_OscInitStruct.HSICalibrationValue = 16;
 665   RCC_OscInitStruct.PLL.PLLState        = RCC_PLL_ON;
 666   RCC_OscInitStruct.PLL.PLLSource       = RCC_PLLSOURCE_HSI;
 667   //RCC_OscInitStruct.PLL.PLLM          = 16;            // VCO input clock = 1 MHz (16 MHz / 16)
 668   //RCC_OscInitStruct.PLL.PLLN          = 400;           // VCO output clock = 400 MHz (1 MHz * 400)
 669   RCC_OscInitStruct.PLL.PLLM            = 8;             // VCO input clock = 2 MHz (16 MHz / 8)
 670   RCC_OscInitStruct.PLL.PLLN            = 200;           // VCO output clock = 400 MHz (2 MHz * 200)
 671   RCC_OscInitStruct.PLL.PLLP            = RCC_PLLP_DIV4; // PLLCLK = 100 MHz (400 MHz / 4)
 672   RCC_OscInitStruct.PLL.PLLQ            = 9;             // USB clock = 44.44 MHz (400 MHz / 9) --> Not good for USB
 673   if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK)
 674   {
 675     return 0; // FAIL
 676   }
 677
 678   /* Select PLL as system clock source and configure the HCLK, PCLK1 and PCLK2 clocks dividers */
 679   RCC_ClkInitStruct.ClockType      = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2);
 680   RCC_ClkInitStruct.SYSCLKSource   = RCC_SYSCLKSOURCE_PLLCLK; // 100 MHz
 681   RCC_ClkInitStruct.AHBCLKDivider  = RCC_SYSCLK_DIV1;         // 100 MHz
 682   RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV2;           //  50 MHz
 683   RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1;           // 100 MHz
 684   if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_3) != HAL_OK)
 685   {
 686     return 0; // FAIL
 687   }
 688
 689   /* Output clock on MCO1 pin(PA8) for debugging purpose */
 690   //HAL_RCC_MCOConfig(RCC_MCO1, RCC_MCO1SOURCE_HSI, RCC_MCODIV_1); // 16 MHz
 691
 692   return 1; // OK
 693 }
 694
 695 /**
 696   * @}
 697   */
 698
 699 /**
 700   * @}
 701   */
 702
 703 /**
 704   * @}
 705   */
 706 /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/