tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/hal/TARGET_NXP/TARGET_LPC13XX/PinNames.h

   1 /* mbed Microcontroller Library
   2  * Copyright (c) 2006-2013 ARM Limited
   3  *
   4  * Licensed under the Apache License, Version 2.0 (the "License");
   5  * you may not use this file except in compliance with the License.
   6  * You may obtain a copy of the License at
   7  *
   8  *     http://www.apache.org/licenses/LICENSE-2.0
   9  *
  10  * Unless required by applicable law or agreed to in writing, software
  11  * distributed under the License is distributed on an "AS IS" BASIS,
  12  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  13  * See the License for the specific language governing permissions and
  14  * limitations under the License.
  15  */
  16 #ifndef MBED_PINNAMES_H
  17 #define MBED_PINNAMES_H
  18
  19 #include "cmsis.h"
  20
  21 #ifdef __cplusplus
  22 extern "C" {
  23 #endif
  24
  25 typedef enum {
  26     PIN_INPUT,
  27     PIN_OUTPUT
  28 } PinDirection;
  29
  30 #define PORT_SHIFT  5
  31
  32 typedef enum {
  33     // LPC1347 Pin Names
  34     P0_0 = 0,
  35     P0_1 = 1,
  36     P0_2 = 2,
  37     P0_3 = 3,
  38     P0_4 = 4,
  39     P0_5 = 5,
  40     P0_6 = 6,
  41     P0_7 = 7,
  42     P0_8 = 8,
  43     P0_9 = 9,
  44     P0_10 = 10,
  45     P0_11 = 11,
  46     P0_12 = 12,
  47     P0_13 = 13,
  48     P0_14 = 14,
  49     P0_15 = 15,
  50     P0_16 = 16,
  51     P0_17 = 17,
  52     P0_18 = 18,
  53     P0_19 = 19,
  54     P0_20 = 20,
  55     P0_21 = 21,
  56     P0_22 = 22,
  57     P0_23 = 23,
  58
  59     P1_13 = 45,
  60     P1_14 = 46,
  61     P1_15 = 47,
  62     P1_16 = 48,
  63
  64     P1_19 = 51,
  65     P1_20 = 52,
  66     P1_21 = 53,
  67     P1_22 = 54,
  68     P1_23 = 55,
  69     P1_24 = 56,
  70     P1_25 = 57,
  71     P1_26 = 58,
  72     P1_27 = 59,
  73     P1_28 = 60,
  74     P1_29 = 61,
  75
  76     P1_31 = 63,
  77
  78     // DIP Pin Names
  79     p1  = P0_0,
  80     p2  = P0_11,
  81     p3  = P0_12,
  82     p4  = P0_13,
  83     p5  = P0_14,
  84     p6  = P1_31,
  85     p8  = P0_16,
  86     p9  = P0_22,
  87     p10 = P0_23,
  88     p13 = P1_29,
  89     p14 = P1_21,
  90     p15 = P0_8,
  91     p16 = P0_9,
  92     p17 = P1_24,
  93     p18 = P0_4,
  94     p19 = P1_13,
  95     p20 = P1_14,
  96     p21 = P1_22,
  97     p22 = P0_17,
  98     p23 = P0_5,
  99     p24 = P0_21,
 100     p25 = P0_19,
 101     p26 = P0_18,
 102     p27 = P1_15,
 103     p28 = P1_16,
 104     p29 = P1_25,
 105     p30 = P1_19,
 106     p33 = P0_20,
 107     p34 = P0_2,
 108     p35 = P1_26,
 109     p36 = P1_27,
 110     p37 = P1_20,
 111     p38 = P1_23,
 112     p39 = P0_7,
 113     p40 = P1_28,
 114
 115     UART_TX = P0_19,
 116     UART_RX = P0_18,
 117
 118     // Not connected
 119     NC = (int)0xFFFFFFFF,
 120
 121     LED1 = p21,
 122     LED2 = p21,
 123     LED3 = p21,
 124     LED4 = p21,
 125
 126     // Standard but not supported pins
 127     USBTX = NC,
 128     USBRX = NC,
 129
 130 } PinName;
 131
 132 typedef enum {
 133     CHANNEL0 = PIN_INT0_IRQn,
 134     CHANNEL1 = PIN_INT1_IRQn,
 135     CHANNEL2 = PIN_INT2_IRQn,
 136     CHANNEL3 = PIN_INT3_IRQn,
 137     CHANNEL4 = PIN_INT4_IRQn,
 138     CHANNEL5 = PIN_INT5_IRQn,
 139     CHANNEL6 = PIN_INT6_IRQn,
 140     CHANNEL7 = PIN_INT7_IRQn
 141 } Channel;
 142
 143 typedef enum {
 144     PullUp = 2,
 145     PullDown = 1,
 146     PullNone = 0,
 147     Repeater = 3,
 148     OpenDrain = 4,
 149     PullDefault = PullDown
 150 } PinMode;
 151
 152 #ifdef __cplusplus
 153 }
 154 #endif
 155
 156 #endif