tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/hal/TARGET_NXP/TARGET_LPC81X/gpio_irq_api.c

   1 /* mbed Microcontroller Library
   2  * Copyright (c) 2006-2013 ARM Limited
   3  *
   4  * Licensed under the Apache License, Version 2.0 (the "License");
   5  * you may not use this file except in compliance with the License.
   6  * You may obtain a copy of the License at
   7  *
   8  *     http://www.apache.org/licenses/LICENSE-2.0
   9  *
  10  * Unless required by applicable law or agreed to in writing, software
  11  * distributed under the License is distributed on an "AS IS" BASIS,
  12  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  13  * See the License for the specific language governing permissions and
  14  * limitations under the License.
  15  */
  16 #include <stddef.h>
  17
  18 #include "cmsis.h"
  19 #include "gpio_irq_api.h"
  20 #include "mbed_error.h"
  21
  22 #define CHANNEL_NUM    8
  23 #define LPC_GPIO_X LPC_PIN_INT
  24 #define PININT_IRQ PININT0_IRQn
  25
  26 static uint32_t channel_ids[CHANNEL_NUM] = {0};
  27 static gpio_irq_handler irq_handler;
  28
  29 static inline void handle_interrupt_in(uint32_t channel) {
  30     uint32_t ch_bit = (1 << channel);
  31     // Return immediately if:
  32     //   * The interrupt was already served
  33     //   * There is no user handler
  34     //   * It is a level interrupt, not an edge interrupt
  35     if ( ((LPC_GPIO_X->IST & ch_bit) == 0) ||
  36          (channel_ids[channel] == 0      ) ||
  37          (LPC_GPIO_X->ISEL & ch_bit      ) ) return;
  38
  39     if ((LPC_GPIO_X->IENR & ch_bit) && (LPC_GPIO_X->RISE & ch_bit)) {
  40         irq_handler(channel_ids[channel], IRQ_RISE);
  41         LPC_GPIO_X->RISE = ch_bit;
  42     }
  43     if ((LPC_GPIO_X->IENF & ch_bit) && (LPC_GPIO_X->FALL & ch_bit)) {
  44         irq_handler(channel_ids[channel], IRQ_FALL);
  45     }
  46     LPC_GPIO_X->IST = ch_bit;
  47 }
  48
  49 void gpio_irq0(void) {handle_interrupt_in(0);}
  50 void gpio_irq1(void) {handle_interrupt_in(1);}
  51 void gpio_irq2(void) {handle_interrupt_in(2);}
  52 void gpio_irq3(void) {handle_interrupt_in(3);}
  53 void gpio_irq4(void) {handle_interrupt_in(4);}
  54 void gpio_irq5(void) {handle_interrupt_in(5);}
  55 void gpio_irq6(void) {handle_interrupt_in(6);}
  56 void gpio_irq7(void) {handle_interrupt_in(7);}
  57
  58 int gpio_irq_init(gpio_irq_t *obj, PinName pin, gpio_irq_handler handler, uint32_t id) {
  59     if (pin == NC) return -1;
  60
  61     irq_handler = handler;
  62
  63     int found_free_channel = 0;
  64     int i = 0;
  65     for (i=0; i<CHANNEL_NUM; i++) {
  66         if (channel_ids[i] == 0) {
  67             channel_ids[i] = id;
  68             obj->ch = i;
  69             found_free_channel = 1;
  70             break;
  71         }
  72     }
  73     if (!found_free_channel) return -1;
  74
  75     /* Enable AHB clock to the GPIO domain. */
  76     LPC_SYSCON->SYSAHBCLKCTRL |= (1<<6);
  77
  78     LPC_SYSCON->PINTSEL[obj->ch] = pin;
  79
  80     // Interrupt Wake-Up Enable
  81     LPC_SYSCON->STARTERP0 |= 1 << obj->ch;
  82
  83     void (*channels_irq)(void) = NULL;
  84     switch (obj->ch) {
  85         case 0: channels_irq = &gpio_irq0; break;
  86         case 1: channels_irq = &gpio_irq1; break;
  87         case 2: channels_irq = &gpio_irq2; break;
  88         case 3: channels_irq = &gpio_irq3; break;
  89         case 4: channels_irq = &gpio_irq4; break;
  90         case 5: channels_irq = &gpio_irq5; break;
  91         case 6: channels_irq = &gpio_irq6; break;
  92         case 7: channels_irq = &gpio_irq7; break;
  93     }
  94     NVIC_SetVector((IRQn_Type)(PININT_IRQ + obj->ch), (uint32_t)channels_irq);
  95     NVIC_EnableIRQ((IRQn_Type)(PININT_IRQ + obj->ch));
  96
  97     return 0;
  98 }
  99
 100 void gpio_irq_free(gpio_irq_t *obj) {
 101     channel_ids[obj->ch] = 0;
 102     LPC_SYSCON->STARTERP0 &= ~(1 << obj->ch);
 103 }
 104
 105 void gpio_irq_set(gpio_irq_t *obj, gpio_irq_event event, uint32_t enable) {
 106     unsigned int ch_bit = (1 << obj->ch);
 107
 108     // Clear interrupt
 109     if (!(LPC_GPIO_X->ISEL & ch_bit))
 110         LPC_GPIO_X->IST = ch_bit;
 111
 112     // Edge trigger
 113     LPC_GPIO_X->ISEL &= ~ch_bit;
 114     if (event == IRQ_RISE) {
 115         if (enable) {
 116             LPC_GPIO_X->IENR |= ch_bit;
 117         } else {
 118             LPC_GPIO_X->IENR &= ~ch_bit;
 119         }
 120     } else {
 121         if (enable) {
 122             LPC_GPIO_X->IENF |= ch_bit;
 123         } else {
 124             LPC_GPIO_X->IENF &= ~ch_bit;
 125         }
 126     }
 127 }
 128
 129 void gpio_irq_enable(gpio_irq_t *obj) {
 130     NVIC_EnableIRQ((IRQn_Type)(PININT_IRQ + obj->ch));
 131 }
 132
 133 void gpio_irq_disable(gpio_irq_t *obj) {
 134     NVIC_DisableIRQ((IRQn_Type)(PININT_IRQ + obj->ch));
 135 }