]>
git.gir.st - tmk_keyboard.git/blob - keyboard/hhkb/Makefile
1 #----------------------------------------------------------------------------
4 # make all = Make software.
6 # make clean = Clean out built project files.
8 # make coff = Convert ELF to AVR COFF.
10 # make extcoff = Convert ELF to AVR Extended COFF.
12 # make program = Download the hex file to the device.
13 # Please customize your programmer settings(PROGRAM_CMD)
15 # make teensy = Download the hex file to the device, using teensy_loader_cli.
16 # (must have teensy_loader_cli installed).
18 # make dfu = Download the hex file to the device, using dfu-programmer (must
19 # have dfu-programmer installed).
21 # make flip = Download the hex file to the device, using Atmel FLIP (must
22 # have Atmel FLIP installed).
24 # make dfu-ee = Download the eeprom file to the device, using dfu-programmer
25 # (must have dfu-programmer installed).
27 # make flip-ee = Download the eeprom file to the device, using Atmel FLIP
28 # (must have Atmel FLIP installed).
30 # make debug = Start either simulavr or avarice as specified for debugging,
31 # with avr-gdb or avr-insight as the front end for debugging.
33 # make filename.s = Just compile filename.c into the assembler code only.
35 # make filename.i = Create a preprocessed source file for use in submitting
36 # bug reports to the GCC project.
38 # To rebuild project do "make clean" then "make all".
39 #----------------------------------------------------------------------------
41 # Target file name (without extension).
44 # Directory common source filess exist
45 TMK_DIR
= ..
/..
/tmk_core
47 # Directory keyboard dependent files exist
51 # List C source files here. (C dependencies are automatically generated.)
52 SRC
+= keymap_common.c \
62 # TMK Alt Controller or PJRC Teensy 2.0
65 # Processor frequency.
66 # This will define a symbol, F_CPU, in all source code files equal to the
67 # processor frequency in Hz. You can then use this symbol in your source code to
68 # calculate timings. Do NOT tack on a 'UL' at the end, this will be done
69 # automatically to create a 32-bit value in your source code.
71 # This will be an integer division of F_USB below, as it is sourced by
72 # F_USB after it has run through any CPU prescalers. Note that this value
73 # does not *change* the processor frequency - it should merely be updated to
74 # reflect the processor speed set externally so that the code can use accurate
82 # Target architecture (see library "Board Types" documentation).
85 # Input clock frequency.
86 # This will define a symbol, F_USB, in all source code files equal to the
87 # input clock frequency (before any prescaling is performed) in Hz. This value may
88 # differ from F_CPU if prescaling is used on the latter, and is required as the
89 # raw input clock is fed directly to the PLL sections of the AVR for high speed
90 # clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
91 # at the end, this will be done automatically to create a 32-bit value in your
94 # If no clock division is performed on the input clock inside the AVR (via the
95 # CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
98 # Interrupt driven control endpoint task
99 #OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
102 # Boot Section Size in *bytes*
104 # Teensy++ halfKay 1024
105 # Atmel DFU loader 4096 (TMK Alt Controller)
106 # LUFA bootloader 4096
108 OPT_DEFS
+= -DBOOTLOADER_SIZE
=4096
112 # comment out to disable the options.
114 BOOTMAGIC_ENABLE
= yes
# Virtual DIP switch configuration
115 MOUSEKEY_ENABLE
= yes
# Mouse keys
116 EXTRAKEY_ENABLE
= yes
# Audio control and System control
117 CONSOLE_ENABLE
= yes
# Console for debug
118 COMMAND_ENABLE
= yes
# Commands for debug and configuration
119 NKRO_ENABLE
= yes
# USB Nkey Rollover
120 #KEYMAP_SECTION_ENABLE = yes # fixed address keymap for keymap editor
121 #HHKB_JP = yes # HHKB JP support
123 #OPT_DEFS += -DNO_ACTION_TAPPING
124 #OPT_DEFS += -DNO_ACTION_LAYER
125 #OPT_DEFS += -DNO_ACTION_MACRO
132 SRC
:= keymap_
$(KEYMAP
).c
$(SRC
)
135 SRC
:= keymap_jp.c
$(SRC
)
137 SRC
:= keymap_hhkb.c
$(SRC
)
142 ifneq (, $(or
$(findstring keymap_jp.c
, $(SRC
)), $(findstring yes
, $(HHKB_JP
))))
143 OPT_DEFS
+= -DHHKB_JP
148 VPATH
+= $(TARGET_DIR
)
151 include $(TMK_DIR
)/protocol
/lufa.mk
152 include $(TMK_DIR
)/common.mk
153 include $(TMK_DIR
)/rules.mk
155 debug-on
: EXTRAFLAGS
+= -DDEBUG
-DDEBUG_ACTION
158 debug-off
: EXTRAFLAGS
+= -DNO_DEBUG
-DNO_PRINT
159 debug-off
: OPT_DEFS
:= $(filter-out -DCONSOLE_ENABLE
,$(OPT_DEFS
))