onekey: Add desc of V-USB osc calribration
[tmk_keyboard.git] / converter / terminal_usb / Makefile
1 # Target file name (without extension).
2 TARGET = terminal_lufa
3
4 # Directory common source filess exist
5 TMK_DIR = ../../tmk_core
6
7 # Directory keyboard dependent files exist
8 TARGET_DIR = .
9
10 # keyboard dependent files
11 SRC = keymap.c \
12 matrix.c \
13 led.c
14
15 CONFIG_H = config.h
16
17
18 # MCU name, you MUST set this to match the board you are using
19 # type "make clean" after changing this, so all files will be rebuilt
20 #MCU = at90usb162 # Teensy 1.0
21 MCU = atmega32u4 # Teensy 2.0
22 #MCU = at90usb646 # Teensy++ 1.0
23 #MCU = at90usb1286 # Teensy++ 2.0
24
25
26 # Processor frequency.
27 # Normally the first thing your program should do is set the clock prescaler,
28 # so your program will run at the correct speed. You should also set this
29 # variable to same clock speed. The _delay_ms() macro uses this, and many
30 # examples use this variable to calculate timings. Do not add a "UL" here.
31 F_CPU = 16000000
32
33
34 #
35 # LUFA specific
36 #
37 # Target architecture (see library "Board Types" documentation).
38 ARCH = AVR8
39
40 # Input clock frequency.
41 # This will define a symbol, F_USB, in all source code files equal to the
42 # input clock frequency (before any prescaling is performed) in Hz. This value may
43 # differ from F_CPU if prescaling is used on the latter, and is required as the
44 # raw input clock is fed directly to the PLL sections of the AVR for high speed
45 # clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
46 # at the end, this will be done automatically to create a 32-bit value in your
47 # source code.
48 #
49 # If no clock division is performed on the input clock inside the AVR (via the
50 # CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
51 F_USB = $(F_CPU)
52
53 # Interrupt driven control endpoint task
54 OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
55
56
57 # Boot Section Size in bytes
58 # Teensy halfKay 512
59 # Atmel DFU loader 4096
60 # LUFA bootloader 4096
61 OPT_DEFS += -DBOOTLOADER_SIZE=4096
62
63
64 # Build Options
65 # comment out to disable the options.
66 #
67 #BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
68 #MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
69 #EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
70 CONSOLE_ENABLE = yes # Console for debug(+400)
71 COMMAND_ENABLE = yes # Commands for debug and configuration
72 #SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend
73 #NKRO_ENABLE = yes # USB Nkey Rollover
74
75
76 #
77 # PS/2 protocol implementations
78 # USART is recommended if it is available, others are for reference purpose.
79 # INT implementation will drop simultaneous key strokes.
80 #
81 #PS2_USE_USART = yes # uses hardware USART engine for PS/2 signal receive(recomened)
82 PS2_USE_INT = yes # uses external interrupt for falling edge of PS/2 clock pin
83 #PS2_USE_BUSYWAIT = yes # uses primitive reference code
84
85
86 #---------------- Programming Options --------------------------
87 PROGRAM_CMD = teensy_loader_cli -mmcu=$(MCU) -w -v $(TARGET).hex
88
89
90 # Search Path
91 VPATH += $(TARGET_DIR)
92 VPATH += $(TMK_DIR)
93
94 include $(TMK_DIR)/protocol/lufa.mk
95 include $(TMK_DIR)/protocol.mk
96 include $(TMK_DIR)/common.mk
97 include $(TMK_DIR)/rules.mk
Imprint / Impressum