pana_m8: Add initial files
[tmk_keyboard.git] / orphan / ascii_usb / Makefile
1 # Target file name (without extension).
2 TARGET = ascii_usb
3
4 # Directory common source filess exist
5 TMK_DIR = ../../tmk_core
6
7 # Directory keyboard dependent files exist
8 TARGET_DIR = .
9
10 # keyboard dependent files
11 SRC = keymap.c \
12 matrix.c \
13 led.c \
14 protocol/serial_uart.c
15
16 CONFIG_H = config.h
17
18
19 # MCU name, you MUST set this to match the board you are using
20 # type "make clean" after changing this, so all files will be rebuilt
21 #MCU = at90usb162 # Teensy 1.0
22 MCU = atmega32u4 # Teensy 2.0
23 #MCU = at90usb646 # Teensy++ 1.0
24 #MCU = at90usb1286 # Teensy++ 2.0
25
26
27 # Processor frequency.
28 # Normally the first thing your program should do is set the clock prescaler,
29 # so your program will run at the correct speed. You should also set this
30 # variable to same clock speed. The _delay_ms() macro uses this, and many
31 # examples use this variable to calculate timings. Do not add a "UL" here.
32 F_CPU = 16000000
33
34
35 #
36 # LUFA specific
37 #
38 # Target architecture (see library "Board Types" documentation).
39 ARCH = AVR8
40
41 # Input clock frequency.
42 # This will define a symbol, F_USB, in all source code files equal to the
43 # input clock frequency (before any prescaling is performed) in Hz. This value may
44 # differ from F_CPU if prescaling is used on the latter, and is required as the
45 # raw input clock is fed directly to the PLL sections of the AVR for high speed
46 # clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
47 # at the end, this will be done automatically to create a 32-bit value in your
48 # source code.
49 #
50 # If no clock division is performed on the input clock inside the AVR (via the
51 # CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
52 F_USB = $(F_CPU)
53
54 # Interrupt driven control endpoint task
55 OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
56
57
58 # Build Options
59 # *Comment out* to disable the options.
60 #
61 #MOUSEKEY_ENABLE = yes # Mouse keys
62 #EXTRAKEY_ENABLE = yes # Audio control and System control
63 CONSOLE_ENABLE = yes # Console for debug
64 #NKRO_ENABLE = yes # USB Nkey Rollover
65
66
67 # Boot Section Size in bytes
68 # Teensy halfKay 512
69 # Atmel DFU loader 4096
70 # LUFA bootloader 4096
71 OPT_DEFS += -DBOOTLOADER_SIZE=4096
72
73
74 # Search Path
75 VPATH += $(TARGET_DIR)
76 VPATH += $(TMK_DIR)
77
78
79 include $(TMK_DIR)/protocol/lufa.mk
80 include $(TMK_DIR)/protocol.mk
81 include $(TMK_DIR)/common.mk
82 include $(TMK_DIR)/rules.mk
Imprint / Impressum